}

Tender For Eoi Invitation For Selection Of Contractor For Civil And Other Related Works For Road Traffic Signal Installation And Maintenance Works, mumbai-Maharashtra

Kerala State Electronics Development Corporation Limited-KELTRON has published Tender For Eoi Invitation For Selection Of Contractor For Civil And Other Related Works For Road Traffic Signal Installation And Maintenance Works. Submission Date for this Tender is 28-07-2023. Industrial Process Machinery and Equipments Tenders in mumbai Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

38783536
Tender For Eoi Invitation For Selection Of Contractor For Civil And Other Related Works For Road Traffic Signal Installation And Maintenance Works
Open Tender
Indian
Maharashtra
mumbai
28-07-2023

Tender Details

Eoi Invitation For Selection Of Contractor For Civil And Other Related Works For Road Traffic Signal Installation And Maintenance Works Selection Of Contractor For Civil And Other Related Works For Road Traffic Signal Installation And Maintenance Works , Electrical Items : , Sealing Of Controller With Bitumen / Foam For Achieving Ip55 Protection , Installation & Commissioning Of Non Atc Traffic Signal Controller Including All Fittings On Pcc Foundation ( Exclude Pcc Foundation ) , Installation & Commissioning Of Non Atc Controller On Pole As Specified , Removal Of Non Atc Signal Controller From Foundation Or Pole , Installation And Commissioning Of Countdown Timer For Non Atc Signal Junctions , Removal Of Countdown Timer From Pole As Specified , Laying Of Single 120Mm ( Od ) / 100Mm ( Id ) Double Walled Corrugated High Density Poly Ethylene ( Hdpe ) Pipes Including Pull Wire Along With Necessary Sockets, Couplings Etc. And As Per Drawing Provided , Providing, Laying And Joining 160Mm Dia ( Od ) Hdpe Pipe Of Pe-80 Grade And Pn-6 Class , Laying Of Single 50Mm ( Od ) / 37Mm ( Id ) Double Walled Corrugated High Density Poly Ethylene ( Hdpe ) Pipes Including Pull Wire Along With Necessary Sockets, Couplings Etc. And As Per Drawing Provided , Laying Of 100Mm Dia. Class A G.I. Pipe With Provision Of Pull Boxes Etc. As Per Drawings Provided , Laying Of 50Mm Dia. Class A G.I. Pipe With Provision Of Pull Boxes Etc. As Per Drawings Provided , Removal Of Existing All Types Of Class A G. I. Pipes ( Excluding Excavation ) , Removal Of Existing Single 120Mm ( Od ) / 100Mm ( Id ) Double Walled Corrugated High Density Poly Ethylene ( Hdpe ) Pipes , Fixing Of Traffic Signals - Fix Type And Swing Type Cantilever Pole Arm Extension , Removal Of Traffic Signal Straight Pole , Removal Of Traffic Signal Cantilever Pole With Extension Arm Or Camera Pole Assembly , Removal Of Traffic Signal Pole Cantilever Pole Extension Arm , Installation Of 2Mm Thick 310Mm X 215Mm X 100Mmms & Frp Junction Box , Removal / Dismantling Of Existing Junction Box , Installation & Commissioning Of Power Supply Box , Removal / Dismantling Of Existing Power Supply Box ( Ms / Ss ) , Installation Of Polycarbonate Led Signal Aspect Of 300Mm Dia On Standard Traffic Signal Straight Pole , Installation Of Polycarbonate Led Signal Aspect Of 300Mm Dia On Standard Traffic Signal Cantilever Pole , Removal Of Polycarbonate Led Signal Aspect Of 300Mm Dia On Standard Traffic Signal Straight Pole , Removal Of Polycarbonate Led Signal Aspect Of 300Mm Dia On Standard Traffic Signal Cantilever Pole , Laying Of Signal Cables ( All Types Including Communication Cables With Multi Pairs As Described ) In Trenches, Existing Ducts, G.I. Pipes Including Ferruling, Testing Etc ( Excluding Cable Joints, Excavation Etc. ) , Relaying Of Signal Cables ( All Types Including Communication Cables With Multi Pairs As Described ) In Existing Trenches, Ducts, G.I. Pipes Including Ferruling, Testing Etc. ( Excluding Cable Joints, Excavation Etc. ) , Removalof Signal Cables ( All Types Including Communication Cables With Multi Pairs As Described ) In Existing Trenches, Ducts, G.I. Pipes Including Ferruling, Testing Etc. ( Excluding Cable Joints, Excavation Etc. ) , Supply Of Cable Joining Kit And Joining Of 1.5 Sq.Mm 8 Core Copper Conductor Control Cable , Supply Of Cable Joining Kit And Joining Of 1.5 Sq.Mm 16 Core Copper Conductor Control Cable , Installation, Testing And Commissioning Of All Types Of Solar Panel As Described , Removal Of Already Installed Solar Panel As Described Above , Installation, Testing And Commissioning Of Batteries , Removal Of Already Installed Batteries , Installation, Testing And Commissioning Of All Types Of Solar Batteries As Described , Removal Of Already Installed Solar Battery Cabinet Along With Battery , Excavation Of Trench For Traffic Signals And Vms Boards Cables And Conduiting As Per Requirement Of Signal Junction Upto Depth Of 1000Mm Below The Ground Surface And Width 500Mm In The Carriageway ( Asphalt / Mastic Asphalt / Paver Block ) Including Refilling Of The Trench In Carriage Way And Removal Of Debris As Per Guidelines , Excavation Of Trench For Traffic Signals And Vms Boards Cables And Conduiting As Per Requirement Of Signal Junction Upto Depth Of 1000Mm Below The Ground Surface And Width 500Mm In The Carriageway ( Cement Concrete ) Including Refilling Of The Trench In Carriage Way And Removal Of Debris As Per Guidelines , Excavation Of Trench For Traffic Signals And Vms Boards Cables And Conduiting As Per Requirement Of The Signal Junction Upto The Depth Of 600Mm Below The Ground Surface And Width 500Mm In The Foot Path / Soft Soil Including Refilling Of The Trench In The Footpath And Removal Of Debris As Per Guidelines , Cutting Of Two Rows Rcc / Pqc Carriageway Slabs Upto Slab Depth By Special Rcc Cutting Machine ( Diamond Cutter ) For Laying Duct With Double Cut , Excavateandinstallbrickbuiltorequivalent Sectional Chambertobe450mm ( L ) X450mm ( B ) X 600 Mm ( D ) To Tie Into Proposed 120 Mm Ducts / 65Mmg.I.Pipeinfootpathinclude Permanentreinstatementandbackfillmaterial As Pertechnicalspecification And Drawing Provided , Excavateandinstallbrickbuiltorequivalent Sectional Chambertobe560mm ( L ) X450mm ( B ) X 600 Mm ( D ) To Tie Into Proposed 120 Mm Ducts / 65Mmg.I.Pipeinfootpathinclude Permanentreinstatementandbackfillmaterial As Per Technical Specification & Drawing Provided , Erectingstraightpoleinpolefoundationof Concrete M20 Grade Circular In Shape Of Depth 1.3Mbelow And / Oraboveground Level Having Dia. Of300mm Only, As Pertechnical Specification And Drawing , Erectingcantileverpoleinpole Foundationof Concrete M20 Grade Circular In Shape Of Depth 1.3Mbelow And / Oraboveground Level Having Dia.Of 450Mmonly, Aspertechnical Specification And Drawing , Construction Of Signal Controller Foundation Upto600mmheightabovegroundleveland 600 Mm Below Ground Level On C.C. M20 Grade Pedestal, Havingsize ( Lxbxh ) Withfixingof Ss304 Nut Bolts For Controller Cabinet & Power Supplyboxcabinetasper Technical Specificationprovidedanddrawing , Supply, Installation & Testing Chemical Earthing Which Includes Chemo Mf Earthing Electrodes Field With Ssc Compound, Seal From Both The End Having Dia 80 Mm Length 1000Mm, Terminal 50 * 6 Mm, Moc-Sdgi With Soil Resistivity Improvement Powder With Moister Booster Compound By Manually Digging Process Fixing Of Frp Earthing Chamber Cover, Connection Of Earthing Pit To Grip With Each Other & Accessories I.E. Cables, Lux, Nuts, Bolts, Gi Strips ( 25X3 ) 1 Mtr Etc. As Directed By Engineer. , Painting Of Straight Pole By Silver Aluminium.The Existing Paint Of The Exterior Surface Of Pole Shall Be Made Smooth By Using Emery Paper. Then Surface Shall Be Painted With Red Oxide One Layer & Two Layer Of Silver Aluminium With Prefered Make Or As Instructed By Engineer. , Painting Of Signal Junction Hardware ( Non Atc ) , Mass Cleaning Of Signal Junction.

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document

BOQ Items

Name of Work: Selection of Contractor for Civil and other related works for Road Traffic Signal Installation and Maintenance Works
Sl. No. Item Description
1Electrical Items :
2Sealing of Controller with bitumen/foam for achieving IP55 protection
3Installation & Commissioning of Non ATC Traffic Signal Controller including all fittings on PCC foundation (Exclude PCC foundation)
4Installation & Commissioning of Non ATC Controller on Pole as specified
5Removal of Non ATC Signal Controller from foundation or pole
6Installation and commissioning of Countdown Timer for Non ATC Signal Junctions
7Removal of Countdown Timer from Pole as specified
8Laying of single 120mm (OD)/100mm (ID) double walled corrugated High Density Poly Ethylene (HDPE) pipes including pull wire along with necessary sockets, couplings etc. and as per drawing provided
9Providing, Laying and joining 160mm dia (OD) HDPE pipe of PE-80 grade and PN-6 class
10Laying of single 50mm (OD)/37mm (ID) double walled corrugated High Density Poly Ethylene (HDPE) pipes including pull wire along with necessary sockets, couplings etc. and as per drawing provided
11Laying of 100mm dia. Class "A" G.I. pipe with provision of pull boxes etc. as per drawings provided
12Laying of 50mm dia. Class "A" G.I. pipe with provision of pull boxes etc. as per drawings provided
13Removal of existing all types of class "A" G. I. Pipes (excluding excavation)
14Removal of existing single 120mm (OD)/100mm (ID) Double walled corrugated high density poly ethylene (HDPE) pipes
15Fixing of traffic signals - fix type and swing type cantilever pole arm extension
16Removal of traffic signal straight pole
17Removal of traffic signal cantilever pole with extension arm or camera pole assembly
18Removal of traffic signal pole cantilever pole extension arm
19Installation of 2mm thick 310mm X 215mm X 100mmMS & FRP junction box
20Removal / dismantling of existing junction box
21Installation & commissioning of power supply box
22Removal / dismantling of existing power supply box (MS /SS)
23Installation of polycarbonate LED signal aspect of 300mm dia on standard traffic signal straight pole
24Installation of polycarbonate LED signal aspect of 300mm dia on standard traffic signal cantilever pole
25Removal of polycarbonate LED signal aspect of 300mm dia on standard traffic signal straight pole
26Removal of polycarbonate LED signal aspect of 300mm dia on standard traffic signal cantilever pole
27Laying of signal cables (all types including communication cables with multi pairs as described) in trenches, existing ducts, G.I. pipes including ferruling, testing etc (Excluding cable joints, excavation etc.)
28Relaying of signal cables (all types including communication cables with multi pairs as described) in existing trenches, ducts, G.I. pipes including ferruling, testing etc. (excluding cable joints, excavation etc.)
29Removalof signal cables (all types including communication cables with multi pairs as described) in existing trenches, ducts, G.I. pipes including ferruling, testing etc. (excluding cable joints, excavation etc.)
30Supply of cable joining kit and joining of 1.5 Sq.mm 8 core copper conductor control cable
31Supply of cable joining kit and joining of 1.5 Sq.mm 16 core copper conductor control cable
32Installation, testing and commissioning of all types of solar panel as described
33Removal of already installed solar panel as described above
34Installation, testing and commissioning of batteries
35Removal of already installed batteries
36Installation, testing and commissioning of all types of solar batteries as described
37Removal of already installed solar battery cabinet along with battery
38Excavation of trench for traffic signals and VMS boards cables and conduiting as per requirement of signal junction upto depth of 1000mm below the ground surface and width 500mm in the carriageway (Asphalt/Mastic Asphalt/ Paver block) including refilling of the trench in carriage way and removal of debris as per guidelines
39Excavation of trench for traffic signals and VMS boards cables and conduiting as per requirement of signal junction upto depth of 1000mm below the ground surface and width 500mm in the carriageway (Cement Concrete) including refilling of the trench in carriage way and removal of debris as per guidelines
40Excavation of trench for traffic signals and VMS boards cables and conduiting as per requirement of the signal junction upto the depth of 600mm below the ground surface and width 500mm in the foot path / soft soil including refilling of the trench in the footpath and removal of debris as per guidelines
41Cutting of two rows RCC/PQC carriageway slabs upto slab depth by special RCC cutting machine (Diamond Cutter) for laying duct with double cut
42Excavateandinstallbrickbuiltorequivalent sectional chambertobe450mm(L)X450mm (B) X 600 mm(D) to tie into proposed 120 mm ducts/65mmG.I.Pipeinfootpathinclude permanentreinstatementandbackfillmaterial as pertechnicalspecification and drawing provided
43Excavateandinstallbrickbuiltorequivalent sectional chambertobe560mm(L)X450mm (B) X 600 mm(D) to tie into proposed 120 mm ducts/65mmG.I.Pipeinfootpathinclude permanentreinstatementandbackfillmaterial as per technical specification & drawing provided
44Erectingstraightpoleinpolefoundationof concrete M20 grade circular in shape of depth 1.3mbelow and/oraboveground level having dia. of300mm only, as pertechnical specification and drawing
45Erectingcantileverpoleinpole foundationof concrete M20 grade circular in shape of depth 1.3mbelow and/oraboveground level having dia.Of 450mmonly,aspertechnical specification and drawing
46Construction of signal controller foundation upto600mmheightabovegroundleveland 600 mm below ground level on C.C. M20 grade pedestal,havingsize(LXBXH)withfixingof SS304 nut bolts for controller cabinet & Power supplyboxcabinetasper technical specificationprovidedanddrawing
47Supply, installation & Testing Chemical earthing which includes Chemo MF Earthing electrodes field with SSC compound, seal from both the end having dia 80 mm length 1000mm, terminal 50 * 6 mm, MOC-SDGI with soil resistivity improvement powder with moister booster compound by manually digging process fixing of FRP earthing chamber cover, connection of earthing Pit to grip with each other & accessories i.e. cables, lux, nuts, bolts, GI strips (25X3) 1 mtr etc. as directed by engineer.
48Painting of straight pole by Silver Aluminium.The existing paint of the exterior surface of pole shall be made smooth by using emery paper. Then surface shall be painted with red oxide one layer & two layer of silver aluminium with prefered make or as instructed by Engineer.
49Painting of Signal Junction Hardware (Non ATC)
50Mass Cleaning of Signal Junction.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail