Tender For Repairs To Z.P. Primary School At. Jawalka, Tq- Washi, Dist- Osmanabad.
Tender Value
3.81 Lakhs
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
3814
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
washi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Z.P. Primary School At. Jawalka, Tq- Washi, Dist- Osmanabad.
BOQ
| Sl. No. | Item Description |
| 1 | Item No- 01:- Dismantling stone masonry in Mud including stacking the materialsas directed with all leads, lifts etc. complete. |
| 2 | Item No- 02:- Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stackingthe same as and where directed in the compound including scaffoldingetc. complete. |
| 3 | Item No- 03:- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed withall leads, lifts etc. complete |
| 4 | Item No- 04:- Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete |
| 5 | Item No- 05:- Excavation for foundation in earth, soil of all types, sand, gravel andsoft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation andnecessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 6 | Item No- 06:- Providing and laying Cast in situ/Ready Mix cement concrete inM-10 of trap/ granite/ quartzite/ gneiss metal for foundation and beddingincluding bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fullyautomatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 7 | Item No- 07:- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including strikingjoints, raking out joints, watering and scaffolding etc. Complete |
| 8 | Item No- 08:- Filling in plinth and floors with contractors material/brought fromoutside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 9 | Item No- 09:- Providing internal cement plaster 20mm thick in Single coats incement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete |
| 10 | Item No- 10:- Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge singleleaf joined by fusion welding at appropriate points with verticalgrooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the peripheryof the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories |
| 11 | Item No- 11:- Providing and fixing cold rolled steel hollow door frame 105mm x60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer. |
| 12 | Item No- 12:- Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior gradeas per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. |
| 13 | Item No- 13:- Providing and laying Rough Shahabad Stone Flooring 25mm to30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar1:3 curing and cleaning etc. complete |
| 14 | Item No- 14:- Providing and laying vitrified matt fininsh tiles having size 590 mmto 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 15 | Item No- 15:- Providing and laying vitrified matt finish tiles having size 590 mmto 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc.complete. |
| 16 | Item No- 16:- Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150gms/sq.mt. total on each side ) profiled sheets for roofing. The feedmaterial is manufactured out of nominal 0.45 mm Base MetalThickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPayield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Includingfasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) |
| 17 | Item No- 17:- Providing 25 mm to 30 mm thick partition of polished black kadappastone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish |
| 18 | Item No- 18:- Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). |
| 19 | Item No- 19:- Providing and applying two coats of water proof cement paint ofapproved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 20 | Item No- 20:- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats includingscaffolding, preparing the surfaces. (excluding the primer coat.) etc.complete. |
| 21 | Item No- 21:- Fixing in position Road Junction/ Informatory Sign Board in ground with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leadscomplete. |
| 22 | Total in Figures. |
| 23 | Item No- 22:- Charges for Testing |
| 24 | Item No- 23:- Royalty Charges |
| 25 | Total in Figures. |
AI Tender Summary
Tender Timeline
Jul 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender