Tender For Salem District - Kadayampatti Block- Construction Of New Anganwadi Building At Melkombai In Bommiampatty Panchayat - Agamt-Ii-2023-24 Work No.01
Tender Value
14.31 Lakhs
Estimated cost
Bid Submission
02 Aug 2023
0 days left
EMD
14400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kadayampatti → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Salem District - Kadayampatti Block- Construction Of New Anganwadi Building At Melkombai In Bommiampatty Panchayat - Agamt-Ii-2023-24 Work No.01
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Anganwadi building at Melkombai. H/O :Bommiampatty. |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil |
| 3 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing, laying and curing etc completefor 10 cum. |
| 4 | Refilling the basement with excavated earthother than sandcomplying the Standard specification |
| 5 | Brick work in cement mortar 1:5 (One cement and five sand) using country bricks ground moulded of size 8 3/4\" x4 1/4\" x2 1/4\"cm. For the following including curing,etc., complete complying with standard specification |
| 6 | Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. |
| 7 | Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement and in all floors for RCC column footings, column, pedestals, plinth beam, grade beams, raft slabs, staircase steps, bed blocks, critical pier etc., using mild steel sheets of size 90 x 60 cm & 10 gauge stiffened, welded with steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cm x 6.5cm spaced at about 90 cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specification and as directed (S.I.155) |
| 8 | Lintel Beam |
| 9 | Column main building |
| 10 | Supplying fabricating and placing in position mild steel or nibbled for steel for all reinforced cement concrete works as per the desing given including cost of steel and binding wire in all floors etc. complete complying with standard specification (MS rods or RTS bars will be supplied department sally at section stores and cost will be recovered at issue rate). The binding wire shall be supplied by the Contractor. |
| 11 | Finishing the exposed surface of RCC item of work such as slabs, beams, sunshade, facia, canopy slab, staircase waist slab, landing slab etc., with CM 1:3, 10mm thick. including raking the surface. The rate is to include the cost of providing cement mortar beading or nosing for sunshades & staircase steps, landing slabs etc., complete complying with standard specifications. |
| 12 | Plastering with CM 1:5, 12mm thick. including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 13 | Plastering with CM 1:4, 20mm thick. including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 14 | Towards the cost of Supplying & cost of steel Door of size 0.90 x 2.10 m including all charges etc, complete, complying with standard specification. |
| 15 | Towards the cost of Supplying & cost of steel Door of size 0.75x 2.10 m including all charges etc, complete, complying with standard specification. |
| 16 | Towards the cost of Supplying & cost of steel Door of size 0.75x 2.10 m including all charges etc, complete, complying with standard specification. |
| 17 | Towards the cost of Supplying & cost of Supplying & cost of steel Window of size 1.20 x 1.30 |
| 18 | Towards the cost of Supplying & cost of supply of RCC Jollies ofsize 0.60 x 0.45 m |
| 19 | Supplying & cost of steel Ventilator of size 0.90 x 0.45 |
| 20 | Supplying and cost of Caddapa slab including fixing charges etc., complete complying with standard specification. |
| 21 | Weathering Course Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete |
| 22 | Finished with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm |
| 23 | Providing granolithic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum. |
| 24 | Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete Paving |
| 25 | Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, 20mm thick |
| 26 | Dadooing of walls with glazed tiles of size 300 mm x 200 mm x 6mm laid inCM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 |
| 27 | White washing two coatsusing shell lime including cost and conveyance of all materials to site and all labour charges etc complete |
| 28 | Distembering two coats with best approved distemberincluding cost and conveyance of all materials to site and all labour charges etc complete |
| 29 | Painting two coats with approved Cement Paint over one coat of Primaring coat of Cement Paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying |
| 30 | Painting two coats over new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., withbest approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers. |
| 31 | Black board Painting two coats using black oxide for New blackboard including cost and conveyance of paint and all labour charges etc complete |
| 32 | Supply and fixing of Rainwater downfall pipe with necessary shoe, bends and clamps including etc |
| 33 | Provision for Electrification arrangements with service connection |
| 34 | Light point |
| 35 | Fan point |
| 36 | Fan |
| 37 | Plug point |
| 38 | CFL Lamp |
| 39 | 16AMPS DPI Switch of 500 V |
| 40 | G I Pipe |
| 41 | Service wire |
| 42 | Bulk Head fitting |
| 43 | Providing Water Supply and Sanitaryarrangements |
| 44 | Providing Rain WaterHarvesting structure |
| 45 | Provisionfor Painting cartoons in hall and Letters,Pictures ,Vegitables, leaders, Toys (inner) etc, |
| 46 | Provisionfor Painting cartoons in front faching wall and Letters,Pictures ,Vegitables, leaders, Toys (outer) etc, |
| 47 | Provision for Citizen information board including lettering and painting charges etc. Complete |
| 48 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Jul 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender