Supply, Testing, Installation & Commissioning Of Hydraulic Pneumatic For Fitter Trade, berhampore-West Bengal

Supply Testing Installation And Commissioning Of Hydraulic Pneumatic For Fitter Trade , Hydraulic Pneumatic ( Sl. No.- 1.01 To 1.07 ) For Fitter Trade , Compressor Unit Specification: - Suitable For Pressure: 8 Bar, Delivery: 50 Lpm ( Or More ) , Reservoir Capacity: 24 Litres ( Or More ) , 230V, 50 Hz, With Pressure Regulator And Water Separator. , Pneumatic Trainer Kit Specification: - Consisting Of The Following Matching Components And Accessories: I. Single Acting Cylinder- Max. Stroke Length 50 Mm, Bore Dia 20- 1 No. Ii. Double Acting Cylinder- Max. Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type- 1 No. Iii. 3 / 2-Way Valve- Manually-Actuated, Normally Closed- 2 Nos. Iv. 3 / 2-Way Valve- Pneumatically-Actuated, Spring Return- 1 No. V. One-Way Flow Control Valve- 2 Nos. Vi. 5 / 2-Way Valve- With Manually-Operated Switch- 1No. Vii. 5 / 2-Way Valve- Pneumatically-Actuated, Spring Return- 1 No. Viii. 5 / 2-Way Pneumatic Actuated Valve- Double Pilot- 1 No. Ix. 3 / 2-Way Roller Lever Valve- Direct Actuation Normally Closed- 2 Nos. X. Shuttle Valve ( Or ) - 1 No. Xi. Two-Pressure Valve ( And ) - 1 No. Xii. Pressure Gauge- 0-16 Bar- 1 Nos. Xiii. Manifold With Self-Closing- Nrv, 6-Way- 1 No. Xiv. Pushbutton Station For Electrical Signal Input- With 3 Illuminated Momentary-Contact Switches ( 1 No + 1 Nc ) And 1 Illuminated Maintained-Contact Switch ( 1 No + 1 Nc ) , Contact Load 2A- 1 No. Xv. Relay Station- With 3 Ralays Each With 4 Contact Sets ( 3No+1Nc Or Change-Over Type ) , 5 A- 1 No. Xvi. 3 / 2-Way Single Solenoid Valve- With Led- 1 No. Xvii. 5 / 2-Way Single Solenoid Valve- With Manual Override And Led- 1 No. Xviii. 5 / 2-Way Single Solenoid Valve- With Manual Override And Led- 1 No. Xix. Pneumatic Motor ( Standard ) -1 No. Xx. Power Supply Unit, Input Voltage 85 – 265 V Ac, Output Voltage: 24 V Dc, Output Current: Max. 4.5 A, Short-Circuit-Proof.- 1 No. Xxi. Profile Plate, Anodised Aluminium, 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories ( To Be Fitted Onto The Pneumatic Workstation ) - 1 Set. , Pneumatic Workstation Specification: - With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: ( 1 ) Work Table – Size ( Approx. ) L1200mmxw900mmxh900mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, ( 2 ) Drawer – Size ( Approx. ) – L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit ( Approx. ) - L470mm X W495 Mm X H825mm And ( 3 ) Drawer Slide Height ( Approx. ) 85Mm. , Hydraulic Trainer Kit Specification: - Each Consisting Of The Following Matching Components And Accessories: I. Hydraulic Power Pack- With ( 1 ) External Gear Pump Having A Delivery Rate Of 2.5 Lpm, ( Approx. ) @ 1400 Rpm Operating Pressure 60 Bar, Coupled To A Single-Phase Ac Motor ( 230 V Ac ) Having Start Capacitor And On / Off Switch And Overload Protection, ( 2 ) Pressure Relief Valve Adjustable From 0 – 60 Bar, ( 3 ) Oil Reservoir, =5 Litres Capacity Having Sight Glass, Drain Screw, Air Filter, And P And T Ports.- 1 No. Ii. Pressure Relief Valve- Pilot-Operated- 1 No. Iii. Drip Tray, Steel- Size 1160 Mm X 760 Mm.- 1 No. Iv. Pressure Gauge- Glycerin-Damped, Indication Range Of: 0 – 100 Bar- 1 No. V. Four-Way Distributor- With Five Ports, Equipped With A Pressure Gauge- 1 Set. Vi. Double Acting Hydraulic Cylinder- With A Control Cam, Piston Diameter16 Mm, Piston Rod Diameter10 Mm, Stroke Length 200 Mm.- 1 No. Vii. Suitable Weight- For Vertical Loading Of Hydraulic Cylinder- 1 No. Viii. Mounting Kit For Weight- For Realizing Pulling And Pushing Load.- 1 No. Ix. 3 / 2-Way Directional Control Valve- With Hand Lever Actuation.- 1 No. X. 4 / 2-Way Directional Control Valve- With Hand Lever Actuation.- 1 No. Xi. 4 / 3-Way Directional Control Valve- Closed-Centre Position, With Hand Lever Actuation.- 1 No. Xii. Non-Return Valve.- 1 No. Xiii. Pilot-Operated Check Valve- Pilot To Open.- 1 No. Xiv. One-Way Flow Control Valve- With Integrated Check Valve.- 1 No. Xv. T-Connector With Self Sealing Coupling Nipples ( 2 Nos. ) And Quick Coupling Socket ( 1 No. ) .- 2 Set. Xvi. Profile Plate, Anodised Aluminium, 1100X700 Mm, With Carriers, Mounting Frames And Mounting Accessories ( To Be Fitted Onto The Hydraulic Workstation ) .- 1 Set. , Hydraulic Workstation Specification: - With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide: ( 1 ) Work Table – Size ( Approx. ) L1200mmxw900mmxh900mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, ( 2 ) Drawer – Size ( Approx. ) – L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit ( Approx. ) - L470mmxw495mmxh825mm And ( 3 ) Drawer Slide Height ( Approx. ) 85Mm. , Cut-Section Models Specification: - For Hydraulic Components. ( I ) External Gear Pump Of Size Having Delivery Rate 2.5 Ltr. / Min, At 1400 R.P.M., On Pressure- 60 Bar., ( Ii ) Double Acting Cylinder Of Size Having Stroke Length 200 Mm, Bore Dia- 20 Mm., ( Iii ) 5 / 2 ( 5 Port 2 Position ) Hand Operated Directional Valve., ( Iv ) 4 / 3 ( 4 Port 3 Position ) Hand Operated Directional Valve., ( V ) Non-Return Valve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Vi ) Pressure Reliefvalve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Vii ) Pilot Operated Check Valve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Viii ) One-Way Flow Control Valve Of Inlet Dia 1 ( One ) Inch And Outlet Dia 1 ( One ) Inch., ( Ix ) Pressure Gauge Of Size Having Capacity 120 Psi Or Higher., ( X ) Accumulator Of Size Having Capacity 1 ( One ) Ltr. Or Higher. The Cut Section Of Above Components Should Be Supplied. All The Components Should Be Sectioned Out Of Actual Industrial Components , Cut-Section Models ( For Pneumatic Components ) Specification: I ) Single Acting Cylinder-1 No. Ii ) Double Acting Cylinder-1 No. Iii ) 3 / 2 Way Single Solenoid Valve- 1 No. Iv ) 4 / 2 Directional Control Valve- 1No. V ) 5 / 2 Way Single Solenoid Valve- 1 No. Vi ) 5 / 2 Pneumatic Pilot Valve- 1No. Vii ) 3 / 2-Way Valve- Manually-Actuated-1 No. Viii ) 5 / 2-Way Valve- With Manually-Operated- 1No. Ix ) Air Filter Regulator. X ) Shuttle Valve. The Cut Section Of Above Components Should Be Supplied. All The Components Should Be Sectioned Out Of Actual Industrial Components

Refer document

Refer document

INR 5 Lakhs /-

Name of Work:Supply, Testing, Installation & Commissioning of Hydraulic Pneumatic for Fitter Trade of Govt. ITI, BERHAMPORE

Sl. No.	Item Description
1	Hydraulic Pneumatic (Sl. No.- 1.01 to 1.07) for Fitter Trade
2	Compressor unit Specification: - Suitable for Pressure: 8 bar, Delivery: 50 lpm (or more), Reservoir capacity: 24 Litres (or more), 230V, 50 Hz, with pressure regulator and water separator.
3	Pneumatic Trainer Kit Specification: - Consisting of the following matching components and accessories: I. Single acting cylinder- Max. stroke length 50 mm, Bore dia 20- 1 No. II. Double acting cylinder- Max. stroke length 100 mm, Bore dia 20 mm, magnetic type- 1 No. III. 3/2-way valve- manually-actuated, Normally Closed- 2 Nos. IV. 3/2-way valve- pneumatically-actuated, spring return- 1 No. V. One-way flow control valve- 2 Nos. VI. 5/2-way valve- with manually-operated switch- 1No. VII. 5/2-way valve- pneumatically-actuated, spring return- 1 No. VIII. 5/2-way pneumatic actuated valve- double pilot- 1 No. IX. 3/2-way roller lever valve- direct actuation Normally Closed- 2 Nos. X. Shuttle valve (OR)- 1 No. XI. Two-pressure valve (AND)- 1 No. XII. Pressure gauge- 0-16 bar- 1 Nos. XIII. Manifold with self-closing- NRV, 6-way- 1 No. XIV. Pushbutton station for electrical signal input- with 3 illuminated momentary-contact switches (1 NO + 1 NC) and 1 illuminated maintained-contact switch (1 NO + 1 NC), Contact load 2A- 1 No. XV. Relay station- with 3 ralays each with 4 contact sets (3NO+1NC or Change-over type), 5 A- 1 No. XVI. 3/2-way single solenoid valve- with LED- 1 No. XVII. 5/2-way single solenoid valve- with manual override and LED- 1 No. XVIII. 5/2-way single solenoid valve- with manual override and LED- 1 No. XIX. Pneumatic motor (standard)-1 No. XX. Power supply unit, Input voltage 85 – 265 V AC, Output voltage: 24 V DC, Output current: max. 4.5 A, short-circuit-proof.- 1 No. XXI. Profile plate, Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the pneumatic workstation)- 1 Set.
4	Pneumatic Workstation Specification: - With 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mm x W495 mm x H825mm and (3) Drawer slide height (Approx.) 85mm.
5	Hydraulic Trainer Kit Specification: - Each consisting of the following matching components and accessories: I. Hydraulic Power pack- with (1) external gear pump having a delivery rate of 2.5 lpm, (approx.) @ 1400 rpm operating pressure 60 bar, coupled to a single-phase AC motor (230 V AC) having start capacitor and ON/OFF switch and overload protection, (2) pressure relief valve adjustable from 0 – 60 bar, (3) oil reservoir, =5 litres capacity having sight glass, drain screw, air filter, and P and T ports.- 1 No. II. Pressure relief valve- pilot-operated- 1 No. III. Drip tray, steel- size 1160 mm x 760 mm.- 1 No. IV. Pressure Gauge- Glycerin-damped, Indication range of: 0 – 100 bar- 1 No. V. Four-Way distributor- with five ports, equipped with a pressure gauge- 1 Set. VI. Double acting hydraulic cylinder- with a control cam, Piston diameter16 mm, Piston rod diameter10 mm, Stroke length 200 mm.- 1 No. VII. Suitable Weight- for vertical loading of hydraulic cylinder- 1 No. VIII. Mounting kit for weight- for realizing pulling and pushing load.- 1 No. IX. 3/2-way directional control valve- with hand lever actuation.- 1 No. X. 4/2-way directional control valve- with hand lever actuation.- 1 No. XI. 4/3-way directional control valve- closed-centre position, with hand lever actuation.- 1 No. XII. Non-return valve.- 1 No. XIII. Pilot-operated check valve- pilot to open.- 1 No. XIV. One-way flow control valve- with integrated check valve.- 1 No. XV. T-Connector with self sealing coupling nipples (2 Nos.) and quick coupling socket (1 No.).- 2 Set. XVI. Profile plate, Anodised Aluminium, 1100x700 mm, with carriers, mounting frames and mounting accessories (To be fitted onto the Hydraulic workstation).- 1 Set.
6	Hydraulic Workstation Specification: - With 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide: (1) Work Table – Size(Approx.) L1200mmXW900mmXH900mm, with four castor wheels including two lockable wheels at the front side, (2) Drawer – Size (Approx.) – L460mmxW495mm xH158mm each, and overall size of Drawer unit (Approx.) - L470mmxW495mmxH825mm and (3) Drawer slide height (Approx.) 85mm.
7	Cut-section models Specification: - For hydraulic components. (i) External Gear Pump of size having delivery rate 2.5 Ltr./min, at 1400 r.p.m., on pressure- 60 bar., (ii) Double Acting Cylinder of size having stroke length 200 mm, bore dia- 20 mm., (iii) 5/2 (5 port 2 position) hand operated Directional Valve., (iv) 4/3 (4 port 3 position) hand operated Directional Valve., (v) Non-return Valve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (vi) Pressure ReliefValve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (vii) Pilot Operated Check Valve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (viii) One-way Flow Control Valve of inlet dia 1 (one) inch and outlet dia 1 (one) inch., (ix) Pressure Gauge of size having capacity 120 PSI or higher., (x) Accumulator of size having capacity 1 (one) Ltr. or higher. The cut section of above components should be supplied. All the components should be sectioned out of actual industrial components
8	Cut-section models(For pneumatic components) Specification: i) Single acting cylinder-1 No. ii) Double acting cylinder-1 No. iii) 3/2 way single solenoid valve- 1 No. iv) 4/2 Directional control valve- 1No. v) 5/2 way single solenoid valve- 1 No. vi) 5/2 pneumatic pilot valve- 1No. vii) 3/2-way valve- manually-actuated-1 No. viii) 5/2-way valve- with manually-operated- 1No. ix) Air filter regulator. x) Shuttle valve. The cut section of above components should be supplied. All the components should be sectioned out of actual industrial components