Tender For Furnishing To Govt. Middle School, Saudwadi And Govt. High Secondary School, Panjrapole In Diu District (2Nd Call)
Tender Value
1.38 Crore
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
2.76 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
daman and Diu → Daman And Diu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Furnishing To Govt. Middle School, Saudwadi And Govt. High Secondary School, Panjrapole In Diu District ( 2Nd Call ) Furnishing To Govt. Middle School, Saudwadi And Govt. High Secondary School, Panjrapole In Diu District ( 2Nd Call )
BOQ
| Sl. No. | Item Description |
| 1 | Works |
| 2 | Class Room Benches - 2 Students: Providing and supplying Scholar Bench1200 W Desk Cum Bench size shall be1200 Width mmx 895 Depth mm . Top & Seat Panel shall be18 mmthick PLB(pre - laminated board )withBack panelshall be 18 mm thick PLT .The Understructure shall beMSSQ tubes of size25.4 mmx 1.2 mm Plus there shall also be a storageShelf . As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.)Size : 1200mmx 895mmx 750mm OR/LESS as directed by Engineer-In-Charge [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/] |
| 3 | Class Room Benches - 2 Students: Providing and supplying Scholar Bench1500 W Desk Cum Bench size shall be1200 Width mmx 895 Depth mm . Top & Seat Panel shall be18 mmthick PLB(pre - laminated board )withBack panelshall be 18 mm thick PLT .The Understructure shall beMSSQ tubes of size25.4 mmx 1.2 mm Plus there shall also be a storageShelf . As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.)Size : 1500mmx 895mmx 750mm [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 4 | Teachers Table : Providing and supplying Enzo Table with size of 1350x750x750. Prelaminated particle board with 18mm thick table top and 15mm thick understructure covered with pvc lipping. Locking facility available for top drawers. Attractive balck color handles for all drawers. Tables are available in beech color only.Approved Make Godrej/Herman Miller/Hayworth/Knoll. As approved byArchitect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.)Size : ENZO 1350mm x 750mm x 750mm [Make : Godrej/Geeken/Haworth/Herman Miller/Steelcase/Knoll/Approved by CE] |
| 5 | Wooden Chair for Enzo table as per design: Providing and supplying Wooden Chair made with 1st class CP teak wood. Chair size 450mmX475mmX900mm with tapered back. Front base and rear legs made in teak wood with rear legssupporting the tapered back. The seat base to be made up of teak wood outer centre frame with edges rounded. . All the teak wood/ any other wood used shall be well seasoned and free from knots and any other defects.with same finish (or as approved) melamine polish and nylon shoes etc. all complete. as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU semi gloss finish polish., specifications, sample approved and as directed by the Architect/client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect\"s design intent. No additional claims will be entertained for this. Rate shall inclusive ofmock up sample, all materials, loading, unloading, transportation, placing at all floors and all accessories as described in item description by the Architect/ EIC.(Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size:450mm X 475mm X 900mm [Make : Godrej/Geeken/Haworth/Herman Miller/Steelcase/Knoll/Approved by CE] |
| 6 | Cupboards with Glass Shutter: Providing and supplying Glass Door Storwel shall have an overall size of916mm(W)x486mm(D)x1980mm(H) with welded construction. It should have shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt .It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available and as approved by Architect/EIC.(Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 916mm x 486mm x 1980mm [Make : Godrej/Geeken/Haworth/Herman Miller/Steelcase/Knoll/Approved by CE] |
| 7 | Sport table Chairs : Providing and supplying GodrejUnwind Chair SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm*(seat H) 45.0 cm Seat Size 52.5cm(W)*53.2 cm(D) Back Size 51.6 cm(W)*40.5 cm (H). The seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance. The Powder coated (DFT50+ microns) weled tubular frame is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tubThe Shoes are made of high impact strenght polypropylene polymer compond with indoor grad UV Resistance and pressed fitted with tubularfram and as approved by Architect/EIC . (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) [Make :Godrej/Geeken/Haworth/HermanMiller/Steelcase/KnollApproved by CE] |
| 8 | Staff room Table: Providing and supplying Rectangle Table with table top in 25mm thk laminated plywood with edge banding on all the sides. Top frame in M.S powder coating legs. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 2400mm x 1200mm x 750mm [Make : Godrej/Geeken/Haworth/Herman Miller/Steelcase/Knoll/Approved by CE] |
| 9 | Staff/Principal visitor Chairs:The seat shall be made up of 1.2 ±0.1cm. thick. hot pressed plywoodmeasuredas per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded Polyurethane foam.The back shall be a fabricatedtubular frame assembly;powder coated ( DFT 40-60 microns ) and upholstered using Net fabric with high tenacity yarn. The back tubular frame shall be made of Dia. 1.9±0.02cm x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). The dimensions of seat shall be- 48cm(W) x 47(D) and of back shall be47cm. (W) x 58cm(H). The HR polyurethane foam for seat shall be moulded with density= 45 +/-2 Kg./m3and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The back covershall be a perforated strip fabricated from 0.08±0.01cm. thk. CR steel and powder coated ( DFT 40-60 microns). The perforated back cover shall be provided with an injection moulded ABS label holder and paper label, which serves as a nameplate. The seat shall be covered on the underside with black Polypropylene non-woven fabric. The armrest top shall be injection moulded from black Polypropylene and mounted on to a drop-lift adjustable type M.S. tubular armrest support. The armrest height shall be adjustable up to 6.5±0.5cm.(in 5 steps).Overall static adjustment= 5.0±0.5cm. (along the width).The mechanism shall be designed with -360° revolving type, Single point control, Front-pivot for tilt with feet resting on ground ensuring more comfort, Tilt tension adjustment, 4-position locking with anti-shockfeature, which prevents the backrest from impacting the user when the lock is released,Seat/back tilting ratio of 1: 2.The connecting spine bracket shall be fabricated from 0.6 ± 0.05 cm. thick HR steel and powder coated (DFT 40-60 microns ). Itshould connects the backrest frame assembly to the mechanism.The pneumatic height adjustmentshould have an adjustment of 9.0±0.3cm. The bellow shall be 3-piece telescopictype and injection moulded in blackPolypropylene.The pedestal shall be fabricated from M.S. E.R.W. tube 0 3.81 cm x 0.16 cm thick (IS: 3074 ) and fittedwith 5 nos. twin wheel castors. The pedestal shall be covered with a black polypropylene moulded 2-piece hub cap at the center for aesthetic looks.The pedestal shall have62.0±0.5cm pitch-centre dia. (72.0 ±1.0cm with castors). The pedestal assembly is powder coated (DFT40-60 microns). The twin wheel castors shall be injection moulded in Black Nylon. Overall dimensions shall be as Seat Height - min 42.5 to max 51.5cm, Height - min91.0 to max 100.0cm, Width & Depth of Chair as measured from pedestal - Width-72.0 cm and Depth-72.0 cm.Approved Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 10 | 4 Drawer Filing Cabinets : Providing and supplying 4 Dr Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided alongwith Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Approved Make : Godrej/Herman Miller/ Hayworth/Knoll. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 1320mm x 470mm x 620mm [Make:- Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 11 | Principal Chair : Provdiing and Supplying Pulse Hb chair SEAT/BACK ASSEMBLY: The seat should bemade up of 1.2 ± 0.1cm thk. hot pressed plywoodOCP-QLTA-PL14-18.The Back should bemade up of injection moulded glass filled nylon & upholstered using Net fabric with high tenacity yarn.SEAT SIZE: 47.0 cm. (W) x 51.5 cm. (D)BACK SIZE :45.0 cm. (W) x 65.3 cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should bemoulded with density =55+/-2 kg/m³ and hardness 16 ± 2 kgffor 25% compression.3.ARMRESTS : The armrests have an Up-Down adjustment of 8.5 ± 0.5cm which should beprovided in armrest structure. Armrest Top has an integrated layer of Thermoplastic Elastomer (TPE). LUMBAR SUPPORT ASSEMBLY: The Lumbar support consshould be ts of polypropylene pad with moulded polyurethane foam & covered with polyester fabric. The Height of Lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height. FRONT PIVOT SYNCHRO mechanism: The adjustable tilting mechanism should bedesigned with the following features.• 360° revolving type.• Single point control.• Front-pivot for tilt with feet resting on ground ensuring more comfort.• Tilt tension adjustment.• 4-position locking with anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.PEDESTAL ASSEMBLY: The pedestal should beinjection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should beØ66.1 ± 0.5 cm (76.1 ± 1.0 cm. with castors).TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black Nylon.Adj Neckrest is provided with chair. [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 12 | Principal Table : Providing and supplying Finnesse Table of 1800 Width mm x 900 Depth mm x 740 Height mm with ERU 1500 w X 450dX 705h .Table top shall be 25 mm thick plain particle board (PPB) Clad with thick post formed laminate and thick backing laminate (bdl) .Flat edge Duly sealed withthick PVC beading.The modesty shall bethick plain particle board ( ) PPB Clad with decorative laminate (DL) on both sides. Edge SealedPVC beading . Pedestal 390x435x646 H As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 1800mm x 900mm x 740mm [Make :Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 13 | Display Board :Providing, supplying and fixing Display Board on wall 12mm thick approved quality soft board with cottoncloth/fabric of approved make and shade on 12mm thick IS 710ply 50 mm th approved Glass wool sheet with PVC grip ,hinge attached lockable door made of shatterproof acrylic sheet encased in a round edged frame. All the work complete as approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 1800mm x 1200mm [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 14 | Sport Table : Providing and supplyingSport Table with MS powder coated structure frame from 40mm MS pipes with 25mm particle board finished laminate of approved colours on both sides.The MS structure shall be powder coated after required 7 tank process. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 900mm x 900mm [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 15 | Hall Table : Providing and supplying Dias Table with25mm thk PLT with all Sides Edge Banding, Frame inM.S Powder Coating with 40mm square pipe. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 1500mm x 600mm x 750mm [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 16 | Cupboard :Providing and Supplying KD Plain With 4 Shelves shall have an overall size of 900mm(W)x450mm(D)x1830mm(H) . The construction shall be rigid knock down construction and Material used shall be prime quality CRCA steel - panels from 0.6 mm thick & front frame . Shelf shall be 0.8 mm thick .Configuration (Door) shall be full height steel hinged door . Locking shall be Plastic Recessed Handle cum Cam lock with 3 way locking mechanism with shooting bolt arrangement . Height wise adjustable shelf mounting , Uniformly distributed load capacity per each full shelf shall be 80 Kg maximum . For Plain 4 Nos. of adjustable full shelves . The top shall be metal and Epoxy Powder coated finishto the thickness of 50 microns .ep]. [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 17 | Reading Table: Providing and supplying Reading Table with MS powder coated structure frame from 40mm MS pipes with 19mm particle board finished laminate of approved colours on both sides with safe rounded edges finshed with machine pressed PVC beading on all edges.The MS structure shall be powder coated after required 7 tank process. As approved by Architect.(Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 1800mm x 1200mm . [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 18 | Computer Chairs :Providing and supplying Chair with durable andframe in MS for strength and reliable performance and should have PU foam in back & Moulded PU Seat and Chrome Arms . It should be steady and have sled base with two sled legs wide enough to support the whole chair. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.)[Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 19 | Modular Workstation:Providing and supplying UPBEAT- Modular desk based system with 1200mmht.CUBE legs are fabricated by Argo Shield & have a rectangular shape. Cube legs are available for work top level 750 mm from base. Wire Tray with integrated power box & switch plate (8+3 Anchor Roma). Soft closing access flap with brush. metal modesty: Metal modesty is made from 0.8 mm thick CRCA. Metal modesty are mounted on the worktop with the help of the modesty mounting brackets made of 3 mm thick HR Screen: 18mm thk T mold Fabric screen on studs is providing on table top. Worktop: 25mm thk prelaminated partical board with pvc lippingSize 900Wx600D [Make:Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 20 | Slotted Angle Rack: Providing and supplying Slotted Angle Rack of size 900mm x 300 mm x1850 mmand thickness which should support angles and should be provided in options of hot dip, plain andpainted finish for long time usage. Further,it should be galvanized/powder coated finish which can provide for optimum corrosion resistance.It should be steady enough to keep bulky stuff easily upto 40kg per shelf capacity. It should include shelves with an adjustable arrangement,should havegreater depth support,and should becompletely flexible to use,and also allow easier assembling using nuts and bolts, and should have choice of different thicknesses, robust construction standards that allow handling maximum storage, heavy-duty structural steel section, and others. Offered angle racks should bedesigned utilizing the finest quality of material and sophisticated technology in compliance with set standards of the industry. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 900mm x 300mm x 1850mm [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 21 | Notice Board: Providing and supplyingNotice Board which should have high tear-resistance and self-healing flocked fabric surface (velvet cloth) to firmly grip push pins in place every time and resist hole formation even after multiple use. It should have satin-finish alloy aluminium (6063-T6) frame and precision engineered sturdy soft board core to make the board 100% warp-free and 100% flat and should be such that it can be mounted in landscape as well as portrait orientation on a wall with the help of built-in wall hanging clips. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) Size: 900mm x 600mm [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 22 | LAB : Providing and supplyingLaboratory table . Supply and Installation of Laboratory Workbenches/Storage units including granite worktops, provision for utility service outlets and accessory fittings and electrical switches & fittings identified on drawings as mounted on the laboratory furniture. Shutter should be of twin-type construction with sound dampening effect using profeel. Granite should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. Sink of Standard bowl size (L x W x D) should be 500 x 400 x 300 mm. Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. Reagent Shelves to be of complete modular design consisting of horizontal 2 stage storage shelves.Configuration of the Lab arrangement as per the approved Layouts. As Approved by architect.(Including transportation, loading, unloading and erecting/installation//placing of item at site as directed by engineer in charge) [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 23 | Laboratotary Stool :Providing and supplying Laboratory Stool whichshould be attractive and economical andLab Stool\"s seat is made up of 1.2+-0.1 cm thick flat plywood and with moulded Polyurethane foam and are upholstered with replaceable synthetic leather covers. Configuration of the Lab arrangement as per the approved Layouts. As Approved by architect.(Including transportation, loading, unloading and erecting/installation//placing of item at site as directed by engineer in charge) - [Make :Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] |
| 24 | Podium: Providing and supplying Podium Lecturer Table 25mm thk pre-laminated board (PLB) with storage, with castors for easy movement. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge./Approved by CE) Size: 900mm x 950mm x 750mm |
| 25 | Roller Blinds for Window:Providing, supplying and fixing Blinds as perapproved make as per suggested shade & spring drive system with ball chain with speed control action roller blind with end brackets with, components, bottom bar. Fabric : screen classic 5%Fabric value : 465 gsm ,Thickness : 0.65 mm. Fabric to be as per approved sample. All the work complete as per the detailed drawing , mockup sampleand instruction of Architect/EIC.All complete as per approval of designer. The mode of Measurement: The size of the blind will be measured from end to end bracket (Left to Right bracket) height will be measured from top of the pelmet to sill bottom level and clear opening size only there will be not extra payment towered overlapping.& mockup sample approved by the Architect/ EIC. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge./Approved by CE) Size: 2400mm x 1800mm - check as per actual on site |
| 26 | Writing Green Chalk Board: Providing, supplying Godrej Writing Green Chalk Board with Laminate coated surface sheet for writing with marker & magnet, core material 8.5mm particle board. Back side 1.0mm thick galvanized and heavy anodized aluminum frame with ABS chrome plated corner and Heavy M.S. Nickel plated hook for wall mounting. As approved by Architect. (Including transportation, loading, unloading and erecting/installation/placing of item at site as directed by Engineer in charge.) [Make : Godrej/Geeken/Haworth/HermanMiller/Steelcase/Knoll/Approved by CE] Size : 2400mm X 1200mm |
AI Tender Summary
Tender Timeline
Jul 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender