Tender For Construction Of Steps For Food Kiosk /Repair /Renovation Of Non-Functional Pc Blocks/Path Botonical Garden Kokernag To Brengi Garden And Costt. Of Chowkidar Room At Brengi Garden
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kokernag → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Steps For Food Kiosk / Repair / Renovation Of Non-Functional Pc Blocks / Path Botonical Garden Kokernag To Brengi Garden And Costt. Of Chowkidar Room At Brengi Garden
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 min width as well as10 sqm on plan including making of steps wherever neccessary and disposal of excavated earth,leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge.All kinds of soil : |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected:in allkinds of soils. |
| 4 | Extra for Dewatering for abutments of culverts. |
| 5 | Dry stone solinghand packedincluding supply of stones and preparing surface carraigecomplete. |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand)including curing. One face dressed Fine chisel dressed |
| 10 | Brick work with common burnt clayF.P S ( non modualar) bricks of class designation 75 in foundation and plinth cement mortar 1:6 (1 cement :6 fine sand |
| 11 | Extrafor brick work in super structure above plinth level upto floor V level. |
| 12 | Dry Random Rubble Masonry with hard stones in foundation and Plinth:without bond stone using Nallah stone |
| 13 | Providing and laying Reinforcement cement concrete 1:1.5 :3 (1 cement:1 1.5 coarse sand :3 graded stone agg. 20 mm nominal ) in suspended floors, balconies, landings, and stair cases having slope upto 15, excluding the cost of centring shuttering, All work up to floor v level. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | 40mm thick Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cementslurry and curing complete, but excluding the cost of nosing of steps etc.complete. |
| 16 | Structural steel work welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of synthetic enamel paint over bridge beams and railing and HLall complete. |
| 17 | Structural steel work welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coats of synthetic enamel paint over bridge beams and railing and HLall complete. |
| 18 | Providing and fixing Tie bolt 12 mm dia 150 mm length inside |
| 19 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats ofapproved paint on overlapping of sheets completeexcluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick. |
| 20 | Providing and fixing plained eaves boarding.300x40 mm (nominal size) |
| 21 | Providing and fixing decorated 20mm thick wooden planks ceiling with frame work for baseincl. joists with M.S. screws.Budloo/fir wood |
| 22 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 23 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 24 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 500x500 mm Wall Tiles |
| 25 | Centering and shuttering including strutting, propping etc. and removal of form work for:foundattion , footings, bases for columns |
| 26 | 2. Suspended floors, roofs, landings, balconies and access platforms. |
| 27 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 28 | Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be). (50mmx50mmx3mm) |
| 29 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 an IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in Charge (glazing, panelling and dash fasteners to be paid for separately.)For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprenegasket required (Fittings shall be paid for separately.)(85mmx30mmx1.8mm) |
| 30 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides |
| 31 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)22.3.3 With float glass panes of 4 mm thickness (weight not less than10.0 kg / sqm) |
| 32 | Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to bemeasured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick.with float glass panes 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 33 | Distempering with oil bound washable Distemper of approved brand and manufacture two or more coats on New surface to give an even shade |
| 34 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 35 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 36 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mmwide and effective height of 88 mm, weighing not less than 190 gms. |
| 37 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:15 mm dia. nominal bore |
| 38 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:20 mm dia. nominal bore |
| 39 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 40 | Providing and fixing PTMT Bib cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 gms (short body) |
| 41 | Providing and fixing PTMT Bib cock of approved quality and colour 15 mm nominal bore, 165 mm long, weighing not less than110 gms (Long body) |
| 42 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :18.7.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 43 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm |
| 44 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 45 | Providing and fixing PVC pipe 2.5 inch diasuperior quality |
| 46 | Providing and fixing PVC pipe 4.0 inch diasuperior quality |
| 47 | Providing and fixing 4 inch PVC bend |
| 48 | Providing and fixing Bend 2/5 inch |
| 49 | Providing and fixing 4 inch P Trap |
| 50 | Providing and fixing 15 mm dia elbow |
| 51 | Providing and fixing socket 15 mm Socket |
| 52 | Providing and fixing Tea3/4 inch x 1/2 inch |
| 53 | Providing and fixingUnion 3/4 inch |
| 54 | Providing and fixing Nipple |
| 55 | Providing and fixing Union 1/2inch |
| 56 | Add provision for 1 door and ventilators |
| 57 | Providing Electrification including service line MCB,s etc Complete . |
| 58 | Carriage of materials by average distanceby M/T & H/L |
| 59 | Cement 10 kms MT and 800m HL |
| 60 | sand 35 kms MT and 800m HL |
| 61 | agg 35 kms MT and 800m HL |
| 62 | stone 10km MT and 800m HL |
| 63 | bricks 36 kms MT and 800m HL |
| 64 | steel 10 kms MT and 800m HL |
AI Tender Summary
Tender Timeline
Jul 21, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 01, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender