Tender For Ordinary Patch Work On Muktsar Abohar Via Panniwala Road From Rd 37.86 To 38.15 And 42.00 To 44.96 And 46.97 To 47.97 Km Odr-01, Abohar-Punjab
TDR : 38757832
Tender Notice
BOQ
Expired
Abohar
Punjab
Tender For Ordinary Patch Work On Muktsar Abohar Via Panniwala Road From Rd 37.86 To 38.15 And 42.00 To 44.96 And 46.97 To 47.97 Km Odr-01
Name of Work :-DNIT for Ordinery Patch work onMuktsar via Panniwala road from RD 37.86 to 38.15, 42.00 to 44.96 & 46.97 to 47.97 Km (ODR-01)
Sl. No.
Item Description
1
Providing and laying patch work with stone aggregates of Grading II laid to water bound macadam specification after trimming the pot hole, removal of failed material,hand packing, applying and brooming requisite type of binding materials to fill up the interstices of coarse aggregate, watering and rolling with smooth wheeled roller 8-10 tonnes to match the adjoining surface complete as per technical clause 404 of MORT&H specifications (Without Screening) (24.36 (c)
2
Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications (24.24)
3
Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surfacetreated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications CSR 24.18 b (for BM )
4
Providing and laying bituminous macadam 50mm to 75mm thick with Continuous type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-10 3.4%, laid over a previously prepared surface with paver finisher Mechanical to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications.CSR 24.18 b
5
Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surfacetreated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications CSR 24.18 b (for PC)CSR 24.18 b
6
Providing and laying patch work with Open-graded premix surfacing material of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46 kg per sqm, laid with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clauses 510 of MORTH&H specifications.(24.34 (c))
7
Providing and laying of premix sand seal coat for patch work premixed in Continuous type Hot mix Plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, carriage of mixed material to site of work, laid to the specified levels, grade and cross fall complete as per technical clauses 511 of MORT&H specifications (24.35 (c)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
