Tender For Misc B/R Repair Work Plastering, Flooring, Tiling, Sanitary Work Etc In Otm Accn (Except 475 Engr Bde) Of South Area At Ge Nasirabad
Tender Value
45 Lakhs
Estimated cost
Bid Submission
08 Aug 2023
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nasirabad → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Misc B / R Repair Work Plastering, Flooring, Tiling, Sanitary Work Etcin Otm Accn ( Except 475 Engr Bde ) Of South Area At Ge Nasirabad.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level). |
| 2 | Demolition of reinforced cement concrete of any description and any position complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 4 | Taking down cement plastering of any description on brick / stone/ concrete wall / ceiling surfaces of any description incl racking out joints hacking for key, scrubbing down with water etc. |
| 5 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts. |
| 6 | Taking down chowkats or frames n. exc 1.5sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts. |
| 7 | Demolition of brick or stone Masonary built in cement mortar etc complete all as specified and directed. |
| 8 | M&L for old size brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 9 | M&L for walling of random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 10 | All as per description of serial item No. 9.00 above exceptstone Note : Old servieable stones/bricks retrieved vide Sl item No 7.00 shall be reused. |
| 11 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm complete all as specified and as directed by the Engineer-in-Charge |
| 12 | M&L for rendering in cement mortar (1:6), 15mm thick on other than fair faces of stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 13 | M&L for 5mm thickrendering in cement mortar in CM (1:3) on ceiling finished even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed. Note :-WPC measured and paid separately. |
| 15 | M&L for applying to the damaged concrete portion of slab / columns/ beams/ chajjas / parapet / roof projection/balcony/staircase with single component, fiber roof reinforced, dual shrinkage - compensated thixotropic, cementitious patch repair mortar CICO Repocem PM (having the 12 technical parameters mentioned in material specifications ) capable of applying up to 25-30 mm thick in double layer initially by hand and finishing with troweled carefully compacting the same around the rebar and finishing to bring it in line with existing concrete surface with an average specified thicknesscomplete all as specified and directed. Make :- Fosroc Renderoc/ MYK arment /BASF |
| 16 | M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed. |
| 17 | M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed. |
| 18 | M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed. |
| 19 | M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6, complete all as specified and directed. |
| 20 | M&L for glazed ceramic coloured tiles 7 to 8 mm thickin vertical surfaces area of each tile of exc. 0.11 Sqm and but not exc. 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 21 | All as per the item No 18.00 above but as in skirting over 10 mm screed plaster in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 22 | M&L for 10mm thick vitrified ceramic tiles lightshade(Square/ rectangular) polished, area of each tiles notexceeding 0.36 Sqm Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed. |
| 23 | All as per item No. 22.00 above but on vertical surfaces of wall such as dados, skirting etc set and jointed in neat slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in CM 1:4 completeallas specifed and directed |
| 24 | M&L for machine cut Kota stone slab flooring 20-25 mm thick over 15mm thick screed bed in CM 1:6,laid andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 25 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishingcomplete all as spd & directed. |
| 26 | Only on old surfacesmirror polishing on marble/granite/kota stone where ever required to give high gloss finish complete all as specified & directed. |
| 27 | M&L for RCC type B-1 (1:2:4) using 20mm graded aggregate in slab supported on wall walls beams and columns in floors roof landings complete all as specified and directed. |
| 28 | M&L for precast cement concrete 1:2:4 type B-1(using 20mm graded aggregate) as in cover slabs, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed. |
| 29 | M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified anddirected. |
| 30 | M&L for 18-20mm thick granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edges of stone slabs one edge, complete all as spcified and directed. |
| 31 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm prelam coloured PVC sheet using instead of plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 32 | S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded Prelam (Nut Brown Colour )PVC sheet on the front face & 2mm Prelam (Nut Brown colour ) PVC sheet on back face, and fixing in the frame at site as per specification and drawings on page 176 to 181 of SSR (Part -II) 2020 complete all as specified and directed. |
| 33 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section all as specified and directed. |
| 34 | S&F 150mm long extrueded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 35 | S&F 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed. |
| 36 | S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed. |
| 37 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixingcomplete all as specified and directed. |
| 38 | All as per srl item No 37.00 here in before but 20mm bore |
| 39 | All as per srl item No 37.00 here in before but 25mm bore |
| 40 | S&F 15mm bore, water tubing, medium grade, galvanised with all fittings and fixed to walls, ceiling or laid in floors / trenches complete all as specified and directed. |
| 41 | All as per srl item No 40.00 here in before but 20mm bore |
| 42 | All as per srl item No 40.00 here in before but 25mm bore |
| 43 | Refixing only old serviceable of 15mm bore sizes GI tubing, medium grade, with new fittings if required including cleaning and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 44 | All as per srl item No 43.00 here in before but 20mm bore |
| 45 | All as per srl item No 43.00 here in before but 25mm bore |
| 46 | S&F in repair tubular towel rail brass chromium plated 20mm dia \"D\" type 60cm long between flanges complete all as sped & directed. |
| 47 | S&F in repair CP brass shower rose 100mm overhead ABS with 225mm CP brass arm and flange complete all as specified and directed. |
| 48 | S&F in repairlooking mirror of size 600 mm x 450 mm x 5.5mm thickof selected quality(Including taking out old unserviceable mirror) mounted on PVC frame and fixed to and including wooden plugs with chromium plated brass screwswasher cup washer, complete all as specified and directed |
| 49 | S&F in repairs PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity, White, with inlet ball valve, float and handlefixed on walls by driling holes and using PVC rawl plug of suitable size complete al as specified & directed. |
| 50 | S&F in repairswash hand basin vitreous china white / ivory colour flat size 450 x 300mm fixed including waste coupling, waste pipe & connection pipe complete all as specified and directed. |
| 51 | S&F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 600mm etc complete all as specified and directed. |
| 52 | S&F in repair, 15mm bore Brass CP basin mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified and directed. |
| 53 | S&F in repairs pillar taps ISI marked cast copper allloy capston headed, chromium plated, screwed down, high pressure with long screwedshank and fly nut, screwed for 15mm bore iron pipe complete al as specified & directed. |
| 54 | S&F in repairs 15mm bore cast copper alloy chromium plated bib tap ISI Marked with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified. |
| 55 | S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, ISI marked with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed. |
| 56 | S&F in repair angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), ISI marked, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 57 | S&F mild steel framed work such as grills, grating cooler stands, tank stagingetc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 58 | Taking out old unserviceable water closet and S&F vitreous China \"Orissa pattern\" size 580 x 440mm\" coloured, with intergral foot rests with vitreous china \"P\" or \"S\" trap front or back inlet including connection to trap and to flushing pipe, anti syphnage pipe and making good the floor to match the existing complete all as specified and directed. |
| 59 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed |
| 60 | S & F of vitreous China urinal, flat back, half stall type white/ ivory colour with grating and Union for discharge pipe. Including connection to flushing pipe and outgoing waste pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | Supply and fixing in repairs PVC cabinet of size 450 mm x 600 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed by Engineer-in-Charge. Make : Prayag Cat No. 555 or equivalent make and model as approved by GE |
| 62 | Supply only liquid water proofing compound of approved quality and make confirming to IS complete all as specified and directed. |
| 63 | S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including existing / newMS stack clamps of flat iron 50 X 3mmcomplete all as specified and directed. |
| 64 | S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including existing / newMS stack clamps of flat iron 50 X 3mmcomplete all as specified and directed. |
| 65 | S&Fin repairs 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 66 | S&Fin repairs 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed |
| 67 | S&Fin repairs 110mm bore PVC(SWR) bends with oval accessdoor of any radius complete all as specified and directed. |
| 68 | S & Fin repairs75mm bore PVC(SWR) bends with oval access door of any radius complete all as specified and directed. |
| 69 | S&F in repairs PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 70 | S&F in repair 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 71 | M&L cement concrete 1:2:4using 40mm graded aggregate as in surface channel and drain complete all as specified and directed. |
| 72 | Extra for fair finishes drain or channel 30cm and over in girth in cement concrete using extra cement including forming mounds metred /stopped ends etc complete all as specified and directed. |
| 73 | M&L for 75 mm thick PCC (1:4:8) Type D-2 using 40 graded stone aggregate as in subbase of floor all as specified. |
| 74 | M&L for machine pressed precast concrete reflective type interlocking paver block any shape and size confirmeing to IS-15658-2006 of 60 mm thick, M-35 grade with grey cement and pigment and including over 25 mm thick sand cushioning, etc complete all as specified and directed. |
| 75 | M&L for providing precast cement concrete 1:3:6 Type C-1 using 20mm graded aggregate as in kerbs stone (100mm thick) or mud stops, rounded or chamfered on edges complete fixed in position including set in CM (1:4) and including necessary excavation required & removal of spoil to a distance exc 50 m all as specified and as directed by the Engineer-in-Charge. |
| 76 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed in neat cement slurry and pointed in white the coloured cement to match with tile laid over and including screed bed or bedding layer 15mm thick in CM (1:6) laid over andcomplete all as speciied and directed. |
| 77 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as inplinth protection surface finished fair and evencomplete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). |
| 78 | M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 79 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm average thick wall care putty, complete all as specified and directed. |
| 80 | M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 81 | M&L for preparation of newly plastered/RCC jalli wall surfaces and applying two coats of cement base paint over a coat of primer, complete all as specified and directed. |
| 82 | M&L for rough cast plastered surfaces of wall and applying two coats of weather proof acrylic emuslion paint over a coat of emulsion wall primer all as per manufacture\"s instructions & as directed by Engr -in-Charge. MAKE :- ASIAN/APEX/BERGER (Weather coat all guard) |
| 83 | Complete removal of existing surface of walls and applying two coats of oil bound distemper white or tinted over a coat of primer over 1 mm thick finished coat ofwhite wall careputty complete all as specified and directed. |
| 84 | Taking down old unserviceable kitchen sink and S&Fkitchen sink with drainage board overall size not less than 915x460mm, bowl size 410x 330x160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed.Note :- Minor variation in dimension + 20mm as per standard catalogue of manufacturer may be approval of GE in writing without price adjustment. |
| 85 | S & F in repairs stainless steel plate rack made of 0.50mm thick of over all size920mm x 785 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. Note :- Minor variation in dimension may be permitted as per standard manufacturing models of manufacturer without price adjustment with prior approval of GE but weight shall not be less than 7.00 Kgs. |
| 86 | Providing & Fixingfalse ceiling with Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \"T\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \"T\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm,including dismantling of old boards/ ceiling etccomplete at all heights as per direction of Engineer-in-charge. |
| 87 | S&F in repair 7-8mm thick PVC wall cladding hollow cored and a tongue and grooved edge fixed wuth screw including required PVC cleat at edges and at corner complete all as per manufacturer instruction and directed by engr-in-charge |
| 88 | M & L for precast reinforced cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregateas in louvers & Jallies, 35mm thickincluding all mouldings set in CM (1:4) complete all as specified and directed. |
| 89 | Total in Figures |
| 90 | Quoted Amount in Words |
AI Tender Summary
Tender Timeline
Jul 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender