Military Engineer Services-MES has published Tender For Provision Of Medical Gas Pipe Line System ( Mgps ) In Ot And Icu At Mh Kamptee And Provision Of 12 X Geysers And 12 X Exhaust Fans Bldg No P-139, P-142 And P-143 In Or Md Accn Of 52 Coy Asc ( Sup ) Type A Kamptee.. Submission Date for this Tender is 03-08-2023. Medical Gas System Tenders in kamptee Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5m in deepth and 1.5m in widthand getting out in hard /dense soil ccompleteall as specifiedand directed. |
| 2 | M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specifiedand directed. |
| 3 | M&L Form work to side of concrete in fdns, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specifiedand directed. |
| 4 | M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix)as in footing, foundation, beams, plinth beams, base for columns and mass concreteetc completeall as specifiedand directed. |
| 5 | M&L Form work to side of columns and simillar work complete all as specifiedand directed. |
| 6 | M&L for providingRCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specifiedand directed. |
| 7 | M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specifiedand directed. |
| 8 | M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concreteetc complete all as specifiedand directed. |
| 9 | M&L Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specifiedand directed. |
| 10 | M&L for providingRCC 1:1 1/2:3 type A-1 (nominal mix) (using 20mm graded stone aggregate) as in chajjaetc complete all as specifiedand directed. |
| 11 | S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancingbending and binding with mild steel (anneal) wire not less than 0.90mm dia completeall as specifiedand directed. |
| 12 | S&F mild steel TMT bars 8 to 10 mmdia a as in stirrups, spacers and binders completeall as specifiedand directed. |
| 13 | M&L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet(AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type boltcomplete all as per manufacturer instructions. |
| 14 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150)of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type boltcompleteall as specifiedand directed. |
| 15 | S&F mild steelwork such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specifiedand directed. |
| 16 | M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed |
| 17 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6complete all as specified and as directed. |
| 18 | M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4mixed with WPC finished even and smooth without using extra cement complete all as specifed and directed. (Note : WPC will be measured & paid separately). |
| 19 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6finished even and smooth without using extra cement complete all as specifed and directed. |
| 20 | Supply only Liquid water proofing compound of approved quality completeall as specifiedand directed. |
| 21 | M&L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed. |
| 22 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including prepration of surfaces complete all as specified and directed |
| 23 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specifiedand directed. |
| 24 | M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specifiedand directed. |
| 25 | M&L for 75 mm thick Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed. |
| 26 | M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone agg) ,asin sub base in floor/paving etc complete all as specifiedand directed. |
| 27 | M&L for Machine cut Kota stone slab flooring 20-25 mm thick over cement screedbase 20mm thick in CM 1:4 laid and jointed wih grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishingcomplete, all as specified and directed. |
| 28 | M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab incl rubbing and polishing, laid over and including 10mm thick screedin cement mortar 1:4 incl taking down old one, complete all as specified and directed |
| 29 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed. |
| 30 | Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 31 | Supply and fix aluminium (colour powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement(Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item;(ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint(Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL). |
| 32 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 |
| 33 | S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete Gde Fe 410-W (Gde-E- 250)quality-A, complete all completeall as specifiedand directed. |
| 34 | M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cmwidth or girth not otherwise described andapplying two coat of synthetic enamel paint over a coat of redoxide on new surfaces in any tint completeall as specifiedand directed. |
| 35 | Material & labourfor preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 36 | S&F 100mm long stainless steel butt hinges complete all as specifed and directed. |
| 37 | S&F Extruded Aluminium alloy handles, fabricated type anodised of 125mm long complete all as specifed and directed. |
| 38 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed of 100mm long complete all as specifed and directed. |
| 39 | Aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed. |
| 40 | Returning, filling in, including spreading, levelling, watering and wellramming in layers not exc 25cm in hard/dense soil complete all as specifiedand directed. |
| 41 | Removing excavated material (soil)n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specifiedand directed. |
| 42 | S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed |
| 43 | S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed. |
| 44 | M&L Pre polished Chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm screed bedding in cement mortar (1:4)completeall as specifiedand directed. |
| 45 | M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throatingcomplete all as specified and directed. |
| 46 | Supply,Installation, testing and commissioning of oxygen Gas outlet points complete with matching probe/adopter with one end suitable for Hose & other end suitable for terminal units complete set for Oxygen, system as per technical specification confirming to CE certified/ HTM 02-01/EN/ISO/DIN and as mentioned . The outlets shall be modular singles, and shall incorporate nameplate color-coding. The single modular outlets shall be of a design that provides for ganging of rough-in plates in the field to form multiples.complete all as per technical specifications complete all as specified and as directed. Make- MR Engineering /Aktiv |
| 47 | All as per srl item No-46 here-in-before but Vaccum outlet complete all as specified and as directed. |
| 48 | All as per srl item No-46 here-in-before but Medical air outlet complete all as specified and as directed. |
| 49 | Supply , installation, commissioning and testing ofOxygenManifold: Emergency confirming to ISO standards 4 ( 2 + 2) Cylinders, emergency stand by with regulator suitable to withstand a pressure of 145 Kg/cm2, along with high-pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold.complete all as specified and as directed. Make- MR Engineering/ Aktiv |
| 50 | Supply,Instllation testing and commissiong of Copper Piping 15 mm OD x 0.9mm thick withconforming to BS 2871- 1971 (part) table X complete fittings/fixtures as per technical specification and BS: 13348 and as mentioned ,chemical composition as per BS 6017 of 1981, table 2, Cu- DHP of size. After lying of copper pipes the line will be tested for leak at pressure 1.5 times of working pressure.In case any pressure drop is observed in 24 hour the same will be rectified & the test is repeated till there is no pressure drop for 24 hours. The pipe line will be supported at regular intervals in P.V.C. saddles Installation of piping should be carried out as per approved medical standards with utmost cleanliness.(b) Only pipes, fittings and valves which have been degreased as per approved medical standards complete all as per technical specifications complete all as specified and as directed. Make-Maxflow |
| 51 | Supply,Instllation testing and commissiong of Copper Piping 22mm OD x 0.9mm thick withconforming to BS 2871- 1971 (part) table X complete fittings/fixtures as per technical specification and BS: 13348 and as mentioned ,chemical composition as per BS 6017 of 1981, table 2, Cu- DHP of size. After lying of copper pipes the line will be tested for leak at pressure 1.5 times of working pressure.In case any pressure drop is observed in 24 hour the same will be rectified & the test is repeated till there is no pressure drop for 24 hours. The pipe line will be supported at regular intervals in P.V.C. saddles Installation of piping should be carried out as per approved medical standards with utmost cleanliness.(b) Only pipes, fittings and valves which have been degreased as per approved medical standards complete all as per technical specifications complete all as specified and as directed. Make-Maxflow |
| 52 | Supply, Installation, testing and commissioning of15 mm OD MEDICAL LINE VALVE orISOLATING VALVE as per CE CERTIFIED /HTM -2022/02-01/DIN/ISO/ BS EN 1057 or ball valves as per BS 1057 , rated at 400 psig, as well as full vacuum ( 29.9" Hg). Valves go from full ON to full OFF by turning the vinyl-gripped valve handle 90 degree Locking-type handles may be ordered separately when required. Copper tubing is factory installed to help prevent valve seat damage during soldering. main and riser valves are not required to be installed in a box unless specially noted or required. complete all as per technical specifications complete all as specified and as directed. Make- RB series |
| 53 | All as per srl item No-52 here-in-before but 22 mm OD complete all as specified and as directed. |
| 54 | Supply and fixing valve box for 3 Gasservice size 15mm x 15 mm x 22 mm with NIST connection and SS valve complete all as specified and as directed .complete all as per technical specifications complete all as specified and as directed.Make- RB series |
| 55 | Supply and fixingand installation of Gas alram indigenousefor 3 Gascomplete all as specified and as directed Make- MR Engineering /Aktiv |
| 56 | Supply and fixingwall mounted patient vaccum system with jar and regulator for ICU 2000 ml Jar complete all as specified and as directed Make- MR Engineering /Aktiv |
| 57 | Supply and fixingwall mounted patient vaccum system with jar and regulator for ICU 1000 ml Jar complete all as specified and as directed Make- MR Engineering /Aktiv |
| 58 | Supply and fixingOxygen Flow meter with humidifier bottle complete all as specified and as directed Make- MR Engineering /Aktiv |
| 59 | Supply and fixing Compressor Air 5 HP with tank 250 ltrs and dryer & 3 filters ( Lubricated + tank mounted )complete all as specified and as directed. Make - IR |
| 60 | Supply & fixing vacuum 5 HP, V 255 model with 500 ltr tank complete all as specified & directed Make IR |
| 61 | Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDEP) pipe for laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2) 2001 and 6 mm thickness laid in trenches,wall, floor , pole including bends, sockets and other connected accessories complete all as specified and as directed. |
| 62 | Supply & laying testing LT UGcable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) laid in trenches and through ducts with aluminium conductor 1100 Volt Grade of size 50 Sqmm, 3.5 core including testing complete all as specified and directed.(Make:Havells/KEI/Polycab/ Gloster/ Finolex). |
| 63 | M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed onsurface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxessunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular coverwith frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch.(Cable Make : Finolex, L&T, Legrand, Havells, Polycab) (PVC Conduit Make : Polycab, Anchor, Finolex) Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. One light/fan/ bell point controlled by one, one way switch. Make of wire - Polycab/Havells/Finolex |
| 64 | All as per item No. 63 above but One 3 pin 5 Amp socket outlet on independent board with other switches complete all as specified and as directed. |
| 65 | All as per Item No 63 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 1.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed. |
| 66 | S&F onlySwitch moduler typetype 230/ 250V grade on top covers (catered in point wiring above) Single pole, one way 5 Amp ratingcomplete all as specified and directed. Make- Havells (std)/Polycab/Anchor/C&S |
| 67 | All as per ltem No 25.00 Single pole, one way 15 Amp ratingcomplete all as specified and directed. |
| 68 | S&F only Socket outlet multipurpose use, non/shuttering non/ interlocking flush mountingmodular type, 230/250 Volts grade on top covers (catered in point wiring above) 5 Pin 5 Amp (with 2 pin out let of 5 Amp also) complete all as specified and directed.:- Make- Havells (std)/Polycab/Anchor/C & S |
| 69 | All as per item No. 27.00 above but 6 Pin 15 Amp (with 3 pin out let of 5 Amp also) complete all as specified and directed. |
| 70 | M&L Ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and directed. Make Anchor/Legrand/Crabtree |
| 71 | S&F onlyspeed regulator modular type for ceiling fan electronictype 230 Volts complete all as specified and directed. |
| 72 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 73 | S&F Exhaust fan 300 mm sweep, made out of metel body, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc.,and louver shutters, connecting up with twin core twisted flexible copper conductor cable of suitable sizefrom fitting to ceiling rose, complete all as specified and as directed. Make: Usha/Polycab/ Havells. |
| 74 | Supply and fixin replacement of ceiling fan 1200 mm sweep , BLDC fan,BEE rated 5 star ceiling fan or above with 350 RPM or above with power factor of >/=.0.90 for air delivery of 220 M/Cum minimum service value of 8 with electronic modular type fan regulator 1 modular, completeall as specifeid and as directed. |
| 75 | Supply and fixingMCB DB, SPN, double door12 ways, 240 volts capacityincluding removing old DB withMCBs , fixing the new DB and wall finising complete all as specified and as directedMake : L&T / ABB / Havells |
| 76 | S&F Isolator MCB 4 pole415 V 125 A 50 Hz with rupturing capacity 25KA complete all as specified and directed.Make : L&T / ABB / Havells |
| 77 | Supply and fixingMCB DP40Amps current rating "C" series 10 KA breaking capacitycomplete all as specified and directed. Make : L&T / ABB / Havells |
| 78 | Supply only MCB SP 6 to 32 Amps current rating "C" series 10 KA breaking capacitycomplete all as specified and directed.Make : L&T / ABB / Havells |
| 79 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. complete all as specifieds and directed. Make : Jaquar, Havells, or equivalent Note: If Flexible connection pipes does not come with the product, it will be supplied and fixed by the contractor at no other cost |
| 80 | S&F GI tubing medium grade with all fittings to wall or laid in floor/ceiling of 15 mm bores complete all as specified. |
| 81 | Supply and fixvalves fancy type cast chromium plated, high pressure, screw both end for iron pipe for union and fixed of Size 15 mm bore complete all as specified and directed. |
| 82 | Supply and Fix bib taps fancy type cast chromium plated ,screwed for iron pipe or for brass ferrule and fix bore dia of pipe15 mm complete all as specified and directed. |
| 83 | M&L for cutting existing pipe line for alteration or additions of 15 mm dia complete with tee all as specified anddirected. |
| 84 | M&L for making hole of suitable size for 300mm sweep exhaust fan and including grouting bolts, cutting chasing and plastering, painting etc., to match with the existing surface, complete all as specified and as directed. |
| 85 | M&L for Sub main wiring with two runs of 6 Sqmm single core FRLS PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling as per ISI including 4.0 Sqmm PVC insulated copper conductor earth continuity wire.including cutting chases making good as required complete all as specified and directed. |
| 86 | M&L Earthing complete with galvanized steel plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground earth pit not less than 2.25 meter deep below normal ground level with top edge of the plate not less than 1.5m below normal ground level connected to galvanized wire 25x 4 mm GI strip by means of bolts, nuts, check nuts and washer of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to continuous earth wire on pole all as specified and testing on completion, including provision of earth wire protected by 15mm dia GI light grade protection pipe from test point to main board and 20mm GI medium grade watering pipe funnel, PCC earth pit andRCC cover charcoal, salt and GI wire including excavation and earth work etc complete all as directed at site complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
