Military Engineer Services-MES has published Tender For Special Repair To Water Filtration Plant And Water Supply Pipeline From Burjmohar To Raw Water Tank At Mil Stn Abohar.. Submission Date for this Tender is 10-08-2023. Water Pipe Line Tenders in abohar Punjab. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Removing existing filter media consisting of natural stone gravel size 2 mm to 50 mm filter media, sand and mud etc from filter bed and ( size 5mx4.8m x4.5mtrs) depositing the silt mud etc where directedto a distance not exceeding 100 mtrs, including cleanning and washing, and drying the filtartion bedetc complete all as specified and as directed by Engineer-in-Charge |
| 2 | Supplying and laying the fresh natural stone gravel / Pebbles of size 9.5mm to 6.35mm after porper ashing ,in the filter bed to the required thickness complete all as specified and directed Engineer-in-Charge. |
| 3 | All as per item No 2 (here-in-before) but size of natural stone gravel / Pebbblesof size 20mm to 15mm complete all as specified ans as directed. |
| 4 | All as per item No 2 (here-in-before) but size of natural stone gravel / Pebbblesof size 40mm to 25mm complete all as specified. |
| 5 | Supplying and laying the fresh natural Coarse Quartz 3.18mm x1.59mmof size ,in the filter bed to the required thicknesscomplete all as specified and directed Engineer-in-Charge. |
| 6 | Supplying and laying the fresh natural Coarse Quartz .85mm of size ,in the filter bed to the required thicknesscomplete all as specified and directed Engineer-in-Charge. |
| 7 | Cleanning the sludge tank of size 7 meter dia and 4 meter deep of clear water installation by means of removing mud , sedimets including liquid by mean of suitable manpower who is regulary dealing the same job with safety equipment ,tools and safty measure ,including scrabing the inner surface by wire brush, brooms and removing the mud ,green fungs, leaves, dust and dirts , draining out complete unwanted materials obtained from cleanning, outside the defence land all as specified and directed by Engineer-in-Charge. |
| 8 | Cleaning of the clarifocuator tank of size 14 meter dia and 6 meter deep complete inner and outer partby means of removing mud sediments including liquid by mean of suitable manpower who is regularly dealing the same job with safty equipment tools and safety measure , including scrubing the , inner surface by wire brush brooms and removing the mud ,green fungs , leaves , dust and dirts drainging out complete unwanted material obtained from cleaning , outside the defence land all as directed and specified by Engineer- in- Charge |
| 9 | Supply and fixing in replacement of FM series chemical dosing pump 1/4 HP, 1440 rpm, 3 phase , Frequency 50 HZ, flow rate 150 LPH Aluminium body . Complete all as specified and directed by Engr-in charge. Model:- FM series, Make:- Fluid technik pumping system or equivalent. |
| 10 | M & L MS work for febrication of iron pit cover , gate valve chamber cover,etc. as required MS angle iron of size 50 x 50x6mm thick frame work , MS sheet cover 3 mm thick , cross arms, bracing, supports, clamps structual steel section including nuts,bolts, washers, welding, bending, cold or hot drilling holes for bolts in any shape or size and including of one coat and one finishingcoat of paint complete all as specified and directed by Engr-in-charge. |
| 11 | Supply and fixing in replacement of sluice valve ( Brass spindle) flanged type of class PN1.6 complete of size 200 mm dia complete with iron wheel, nuts, bolts and washer incl rubber/fiber flanged joints etc. complete all as specified.Make : Zloto/kirloskar/venus |
| 12 | Supply and fix inreplacement of sluice valve ( Brass spindle) flanged type of class PN1.6 complete of size 150 mm dia complete with iron wheel, nuts, bolts and washer incl rubber/fiber flanged joints etc. complete all as specified..Make : Zoloto/kirloskar/venus |
| 13 | S & Fin replacement of reduction gear system at clarififlocular of bridge ratio 40/1 KA complete and replacement of3 HP motor(02 Nos) 3 phase 415 volts including replacement of spare parts such as chain, gear starter ,rollers of etc and filling of oil etc including making canopies to the pump and motors of MS sheet not less than 2mm thick to protetc from rain/head etc(Size & shape decided by Engineer-In-Charges) complete all as specified |
| 14 | Supply and fixing in replacement of GI tubing medium grade with all fitting, such as elbow, tee, socket, nipple, reducing socket, reducing elbow, reducing tee, union,including gutties/ saddles etc of size 20 mm bore and fixed to wall/ floor/ceiling including connection to make mixing arrangement of hot/cold water all as specified and directed Engr-in-charge Make ; Jindal/TATA/BST |
| 15 | Priodical maint of back wash tank of capacity 10000 gallons and removing /cleaning of tankby scrapping with wire brush or any other means of walls and bottom of tank and removing the sludge /silt/sand/fungus etc deposited inside the tank with buckets and depositing where directed , including removing media of settel down and making good the patches on walls internally or externally in cement mortar 1:3 where rquired and followed by cleaning with bleaching water solution and fresh water and finally applying one coat of smocem on internal and external surface including writing the date of cleaning complete all as specified and directed by Engr-in-charge |
| 16 | S & F in replacement of centrifugaly pump with motor of capacity 15 HP , 3 phase, 440 Volts, 60 meter head Suction and discharge delivery 80 mm dia complete all as specified and directed by Engr-in-charge. Make : Kirloskar/Crompton greaves/ABB. |
| 17 | Supply and fixing MCCB TPN/TP 415 Volts of rating 63 Amps of braking capacity 16 KA of 4 pole confirming to(Adjustable Thermal and Magnetic Release Setting with short circuit settings)complete taking down old unserviceable one and making necessary connections including all provisions for fixing in panel compartments as existing using necessary links of suitable metals and cleaning the terminals with CTC solutions complete all as specified and directed.Make : Havells/Legrand ABB/Schneider. |
| 18 | All as per item No.17 above but of rating 100 Amps with braking capacity 16 KA. Make : Havells/Legrand/Schneider. |
| 19 | S & F replacement of Star delta starter 3 phase, 415 volts for reduction gear of clariflaculator as per existing capacity and make size complete all as specified and directed by Engr-in-charge. Make : Havells/L & T/Indoasian. |
| 20 | M & L for prepration old metallic , treated irregular and curved suface of pipes , valves, motor pumps, electric panels, steel railing, aggitatorof flaculators in cluding removing existing treatment by scrapping/ burning complete for painting with two coats of Synthetic enamel paint complete all as specified and directed by Engr-in-charge. |
| 21 | M&L for concrete slab cover for cable duct reinforced using TMT bars size of 10mm dia having thickness of slab 50 mm (slab cover size length and breadth not less than 100 cm x 45 cm) including provision with angle plat iron frame size 50x50 mm of thick 6 mm around the slab and 2 supporting plat iron of thick ness 5 mm for strengthen the slab cover and to position over the cable duct angle iron frame duly provision of suitable lifting handles both side complete all as specified and directed |
| 22 | Repairs and servicing of flaculators assembly , oiling , greasing of rotating and fixed arms and repair and replacement of central thust bearing , slip ring assembly , fan belt, chain , of flaculatorcomplete all as specified and directed by Engr-in-charge. |
| 23 | M & L for brick work for valve chamber with sub class "B" bricks in one brick work built in cement mortar 1 : 6 complete all as specified and directed by Engr-in-charge. |
| 24 | M & L for dismantling of sluice valve of any size and replacement of Spindel,check nut, rubber gasket, making the threads of spindle,Replacement of connected parts of sluice valves as per existing size and after repair of sluice valve and re-fixing its orignal position complete all as specified and directed by Engr-in-charge. |
| 25 | S & F in replacement of vaccum operated cylinder mounted chlorinated plant ( 1000 gms chlorine per hours)including connected Items. Replacement of following spare parts of chlorinator plant are as under : - 1.Fixing Yoke with self centring system 2.Chlorine cylinder valve 3.Filter 4.Safety valve 5.Daipharm 6.Chlorine delivery Adjustment needle Valve 7.Chlorine outlet valve 8.Flow meter 9.Vent 10.Vaccum hose Pipe 11.Injector with rated valve |
| 26 | Taking down GI pipe 100 mm dia with fitting from filterration plant complete all as specified and directed by Engr-in-charge |
| 27 | Supplying, laying, jointing/testing and commissioning and testing DI pipes with tyton joint s of spigot and socket ends centrifugally cast ( Spun) class "K"- 7 confirming to IS - 8329-2000 in any length of size 100 mm bore laid in trenches complete all as specified and directed by Engr-in-charge.Make : Electrosteel/TATA/ Electrothermal/Balaji. |
| 28 | Supply and fix as in replacement of CI non return valve(NRV) of size 100 mm incl nuts and volts, testing etc complete Make : Kirloskar/BIR/Venus/Zoloto. |
| 29 | Supply and fix as in replacement of CI non return valve(NRV) of size 150 mm incl nuts and volts, testing etc complete. Make : Kirloskar/Zoloto/BIR/Venus. |
| 30 | M & L disconnecting electric connections,dismantling,taking up centrifugal pumping set capacity 40 HP from existing foundation,transporation to workshop for repair, and back to installation after repairing and welding,brazing,facing grinding, turning repairing/replacement of defective parts,re-assemblying andfixing to its original position and testing pumping set complete all as specified. |
| 31 | Replacement of following spare parts of centrifugal pump set40 HP |
| 32 | SS Impeller |
| 33 | Brass bushs |
| 34 | Stainless steel shaft |
| 35 | Ball bearingas per existing size and make |
| 36 | Gland plate as per existing size |
| 37 | M & L disconnecting electric connections,dismantling,taking up centrifugal pumping set capacity 15 HP from existing foundation,transporation to workshop for repair, and back to installation after repairing and welding,brazing,facing grinding, turning repairing/replacement of defective parts,re-assemblying andfixing to its original position and testing pumping set complete all as specified. |
| 38 | Replacement of following spare parts of centrifugal pump set40 HP |
| 39 | SS Impeller |
| 40 | Brass bushs |
| 41 | Stainless steel shaft |
| 42 | Ball bearingas per existing size and make |
| 43 | Gland plate as per existing size |
| 44 | Disconnecting electric connections,dismantling taking up electric motor 3 phase,440 volts, 50HZ 40 HP capacity from existing foundation coupled with pumping set, removing to workshop for repair,dismantling/opening motor and pumps for required repair work inlcuding rewidning with super enamelled copper wire of existing gauge and weight,tapping,varnishing, re-assemblying and bring back toinstallation and making the same founctional afterre-fixing on existing foundation,testing on full load and commissioning complete all as specified. |
| 45 | Disconnecting electric connections,dismantling taking up Submersible electric motor 3 phase,440 volts, 50HZ 15 HP capacity from existing foundation coupled with pumping set, removing to workshop for repair,dismantling/opening motor and pumps for required repair work inlcuding rewidning with super enamelled copper wire of existing gauge and weight,tapping,varnishing, re-assemblying and bring back toinstallation and making the same founctional afterre-fixing on existing foundation,testing on full load and commissioning complete all as specified. |
| 46 | Disconnecting electric connections,dismantling taking up Submersible electric motor 3 phase,440 volts, 50HZ, 3.5 KW / 5 HP capacity from existing foundation coupled with pumping set, removing to workshop for repair,dismantling/opening motor and pumps for required repair work inlcuding rewidning with super enamelled copper wire of existing gauge and weight,tapping,varnishing, re-assemblying and bring back toinstallation and making the same founctional afterre-fixing on existing foundation,testing on full load and commissioning complete all as specified. |
| 47 | Disconnecting electric connections,dismantling taking up monoblockpump set with electric motor 3 phase,440 volts, 50HZ, 2.2 KW /3 HP capacity from existing foundation coupled with pumping set, removing to workshop for repair,dismantling/opening motor and pumps for required repair work inlcuding rewidning with super enamelled copper wire of existing gauge and replacement of bearing, Impeeler of pumps, shaft bushes and connected work ,varnishing, re-assemblying and bring back toinstallation and making the same founctional after re-fixing on existing foundation,testing on full load and commissioning complete all as specified. |
| 48 | M&L cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundations,fillings and mass concrete all as specified and as directed by Engr in charge. |
| 49 | M&L cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for foundations,fillings and mass concrete all as specified and as directed by Engr in charge. |
| 50 | S & F submersible copper cable of size 6 Sqmm ISI mark complete all as specified & directed by Engr-in-charge.Make : Havells/Finolex/Anchor. |
| 51 | Supply and fixing XLPE CABLE Electric cable 25 Sqmm 3.5 core armoured heavy duty with aluminium conductor 1100 volts grade complete all as specified and directed by Engr-in-chargeMake : Havells/Paragon/KEI. |
| 52 | Taking upCI pipe line 250 mm ( 10" ) dia including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in charge. |
| 53 | Supplying, laying, jointing and testing Spigot and socketed DI pipe 250 mm dia, Class K-9 centrifugally cast ISI marked suitable for tyton joints laid in trenches all as specified & directed by Engr-in-charge.Make : Electrosteel/ TATA/Electrotherm |
| 54 | Supply & Fixing Air release Valve 100 mm dia including fitting complete all as specified and directed by Engr-in-charge |
| 55 | M & L for DI fittingsfor DI spigot and socketed pipe (250 mm dia) like bend ( any type radius and angle) straight taper bend, increasing , decreasing double socket etc. Tee pieces single branch "Y" junction double branch cross collars caps, plugs, tail piece etc. complete all as specified and directed by Engr-in-charge. Note : for DI fittings - The weight of the fitting for the purpose of payment shall be actual weight of the fitting or as specified in IS code whichever is less. |
| 56 | Road cutting up to 70 cm width and depth 90 cm for laying of pipe lines including returning/filling and Compaction, Complete all as specified and directed by Engr-in-charge |
| 57 | M & L premix road repair patching compound with a blend of bitumens aggregate and high grade polymer compoundcomplete all as specified and directed by engr-in-charge. |
| 58 | Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 mtr in depth for foundation etc or for shafts, wells, cesspits, manholes, etc. n exc 10 sqm on plan and n exc 1.5 mtr in depth and getting out complete all as specified and directed by Engr-in-charge. |
| 59 | Returning, filling in including spreading leveling, watering and well ramming in layers each not exc 25 cm in soft/loose soil complete all as specified & directed by Engineer-in-charge. |
| 60 | Removing surplus spoil to a distance not exc 50 mtr and depositing where directed at level not exc 1.5 mtr above the starting point complete all asspecified and directed. |
| 61 | M & L cement concrete 1:2:4 type B-1 ( using 20 mm stone aggregate) 100 mm thick as in flooring including finishing without using extra cement complete all as specified and directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
