}

Tender For Development Of Smart Roads And Underground Ducting Including Utility Shifting Of Water Supply And Power Lines In Abd Area Under Smart City Mission Corporation Roads In Thiruvananthapuram Pumping Station Road Road Id 45 Electrical Works, Thiruvananthapuram-Kerala

Smart City Thiruvananthapuram Limited has published Tender For Development Of Smart Roads And Underground Ducting Including Utility Shifting Of Water Supply And Power Lines In Abd Area Under Smart City Mission Corporation Roads In Thiruvananthapuram Pumping Station Road Road Id 45 Electrical Works. Submission Date for this Tender is 03-08-2023. Road Work Tenders in Thiruvananthapuram Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

38743147
Tender For Development Of Smart Roads And Underground Ducting Including Utility Shifting Of Water Supply And Power Lines In Abd Area Under Smart City Mission Corporation Roads In Thiruvananthapuram Pumping Station Road Road Id 45 Electrical Works
Open Tender
Indian
Kerala
Thiruvananthapuram
03-08-2023

Tender Details

Development Of Smart Roads And Underground Ducting Including Utility Shifting Of Water Supply And Power Lines In Abd Area Under Smart City Mission Corporation Roads In Thiruvananthapuram Pumping Station Road Road Id 45 Electrical Works

Key Value

Document Fees
INR 9757 /-
EMD
INR 100000.0 /-
Tender Value
INR 2.44 Crore /-

BOQ Items

Name of Work:Development of Smart Roads and Underground ducting including Utility shifting of Water Supply and Power lines in ABD Area under Smart City Missions - Corporation Roads -Balance work- ID 45
Sl. No. Item Description
1PART A- UTILITY SHIFTING OF ELECTRICAL POWER SUPPLY LINES- MATERIAL
2Supply of 500 kVA totally enclosed, outdoor dry type CSS with CCCT RMU with 6 nos outgoing on LT side. Make: Subjected to approval from KSEB.
3Supply of Metallic feeder pillar box with 300 amp LB SW on both ends 24 nos of O/G terminals (1ph)with SFU for giving service connections (16amp to 62amp as per requirement).provision for cable entry on both sides, cable connecting facilities, phase indicators, volt meter and ammeter, danger labeling etc< Make: Subjected to approval from KSEB
4Supply of one number armoured aluminium XLPE power cable of 1.1KV grade of the following sizes 2x4 sq.mm
5Supply of one number armoured aluminium XLPE power cable of 1.1KV grade of the following sizes 3.5 x 6 sq.mm
6Supply of one number armoured aluminium XLPE power cable of 1.1KV grade of the following sizes 3.5 x 25 sq.mm
7Supply of one number armoured aluminium XLPE power cable of 1.1KV grade of the following sizes 3.5 x 50 sqmm
8Supply of one number armoured aluminium XLPE power cable of 1.1KV grade of the following sizes 3.5 x 185 sq.mm
9Supply of one number armoured aluminium XLPE power cable of 1.1KV grade of the following sizes 3.5 x 150 sq.mm
10Supply of one number Aluminium armoured XPLE HT cable of the following sizes as required 3 x 300 sq.mm
11Supply of Cable Joint Kit ( 3x300 sq mm –Straight)
12Supply of Cable Joint Kit ( 3x300 sq mm – End )
13Supply of one number PVC insulated single-core copper conductor cable of the following size 2.5 sq.mm
14Supply of one number PVC insulated single-core copper conductor cable of the following size 4 sq.mm
15Supply of one number PVC insulated single-core copper conductor cable of the following size 6 sq.mm
16Supply of following size HDPE pipe ISI marked along with accessories like socket, bend, couplers etc. 32mm dia
17Supply of following size HDPE pipe ISI marked along with accessories like socket, bend, couplers etc. 40mm dia
18Supplyof following size HDPE pipe ISI marked along with accessories like socket, bend, couplers etc. 60mm dia
19Supply of following size HDPE pipe ISI marked along with accessories like socket, bend, couplers etc. 90mm dia
20Supply of following size HDPE pipe ISI marked along with accessories like socket, bend, couplers etc. 110mm dia
21Provision for feeder pillar earthing (earth pipes, gi wires/plates, earthing Chemicals)
22Supply of 1Ph dust & vermin proof and weatherproof FRP meter box with 16 Amps cut out fuse and neutral link
23Supply of 3Ph dust & vermin proof and weather proof FRP meter box with 32 Amps cut out fuse and neutral link
24Supply of 3Ph CT dust & vermin proof and weatherproof FRP meter box with 32 Amps cut out fuse and neutral link
25Supply of 1.5mtr earth pipe for meter box earthing
26Supply of 10SWG Copper earth wire
27Provision for Transformer earthing using molecularly bonded copper of 99.9% purity on low carbon steel of length 3m, 20mm dia, along with earth enhancing mineral compound.
28Supply of LT heat shrink straight jointing kit suitable for cables of size 6 sq.mm to 16 sq.mm.
29Supply of LT heat shrink straight jointing kit suitable for cables of size 70 sq.mm to 120 sq.mm.
30Supply of LT heat shrink straight jointing kit suitable for cables of size 150sq.mm to 240 sq.mm.
31PART C- UTILITY SHIFTING OF ELECTRICAL POWER SUPPLY LINES-LABOUR
32Laying of one number armoured aluminium power cable of 1.1KV grade of the following sizes in the existing HDPE pipe/duct as per the direction of the engineer in charge. 3.5 x 150 / 3 x 150 sq mm.
33Laying of one number armoured aluminium power cable of 1.1KV grade of the following sizes in the existing HDPE pipe/duct as per the direction of the engineer in charge. 3.5 x 185 sq mm
34Laying of one number armoured aluminium power cable of 11KV grade of the following sizes in the existing HDPE pipe/duct as per the direction of the engineer in charge. 3 x 300 sq mm
35Excavation of cable trench in all classes of soil and backfilling of the trench after laying cable (3x300mm sq)
36Additional rate for excavation of cable trench in exceptionally hard condition(like ordinary rock) (3x300mm sq)
37Excavation of cable trench in all classes of soil and backfilling of the trench after laying cable (3.5x120mm sq), (3.5x150mm sq), (3.5x185mm sq)
38Additional rate for excavation of cable trench in exceptionally hard condition(like ordinary rock)(3.5x120mm sq) , (3.5x150mm sq), (3.5x185mm sq)
39Digging and laying LT 3.5 x 50 sq mm cable including providing HDPE pipe for looping cables from pillar box to consumer premises etc as per the directions of engineer in charge.
40Digging and laying LT 3.5 x 25 sq mm cable including providing HDPE pipe for looping cables from pillar box to consumer premises etc as per the direction of engineer in charge.
41Digging and Laying LT cable 3.5x6 sq mm (Three-phase service connection & Street light) including providing HDPE pipe for looping cables from pillar box to consumer premises etc as per the direction of engineer in charge.
42Digging and Laying LT cable 2x4 sq mm (Single-phase service connection) including providing HDPE pipe for looping cables from pillar box to consumer premises etc as per the direction of engineer in charge
43Charges for giving street light connection
44Charges for the erection of feeder pillar box (24 nos outgoings) including Plinth and earthing
45Charges for doing straight joint on cables of sizes beyond 3x150 sq mm and up to and incl. 3x300 sq mm using the cable jointing kit supplied as per specification
46Charges for doing one cable end termination on cables of sizes beyond 3x150 sq mm and up to and incl. 3x300 sq mm using the cable jointing kit.
47Shifting of single phase connection on newly erected meter box, including erection of meter box, earthing, wiring up to DB and other connections
48Shifting of three-phase wp service connection on newly erected meter box, including erection of box, earthing, wiring up to DB and other connections
49Surveying the cable route, Collecting consumers data, measuring cable length to consumers, Pole var details collection, Pillar box and Distribution box marking, preparing Sketch etc.
50Charges for demolishing existing transformer plinth and clearing the debris
51Dismantiling existing RMUS after disconnecting couplers,earthings,cable connections etc including transportation upto 4 km
52Charges for rearranging existing RMUs after disconnecting couplers, earthing, cable connections, etc
53Charges for dismantling existing transformer, distribution boxes and transporting to store
54Charges for providing temporary supply arrangements by using spare transformer or existing transformer connecting all HT and LT cables, constructing temporary plinth, including transportation of transformer, etc
55Doing straight joint on cables of sizes beyond 3.5x6 sqmm and upto and incl. 3.5x16 sq mm using the cable jointing kit
56Doing straight joint on cables of sizes beyond 3.5x70 sqmm and upto and incl. 3.5x120sq mm using the cable jointing kit
57Doing straight joint on cables of sizes beyond 3.5x150 sqmm and upto and incl. 3.5x240 sq mm using the cable jointing kit
58PART C - UTILITY SHIFTING OF ELECTRICAL POWER SUPPLY LINES-ADDITIONAL ITEMS
59Supply and fixing of 20mm size of medium class PVC conduit along with accessories in surface / resess including cutting the wall and making good the same in case of recessed conduit as required.
60Supplying and laying 32 mm X 6 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
61Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
62Supply, Installation, Testing and commissioning of LED steet light with output 120 lumen/W ,3000-6000 K with IP 66 protection, total output of 8000 lumen above LED Chip make Cree/Lumilled/Nichea with power factor >0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
63Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x12 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 6 Meters
64Supplying,installation,testing and commissioning of Astronomical time switch capable of following output in feeder pillars I Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 1 output per phase and suitable for single phase supply
65OPERATION AND MAINTENANCE
66Maintenance charges of road work and other components except land scaping per month for fourth year
67Maintenance charges of road work and other components except land scaping per month for fifth year
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail