Tender For Restoration Of Different M.I. Schemes Under Bagafa Block Under Water Resource Sub-Division, Santirbazar Of South Tripura Dist. / Repairing And Re-Winding Of Horizontal And Submersible Pump Motor In/C Allied Works During The Year 2022-23.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2023
0 days left
EMD
12655
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Restoration Of Different M.I. Schemes Under Bagafa Block Under Water Resource Sub-Division, Santirbazar Of South Tripura Dist. / Repairing And Re-Winding Of Horizontal And Submersible Pump Motor In/C Allied Works During The Year 2022-23.
BOQ
| Sl. No. | Item Description |
| 1 | Complete re-winding of 400/440 volt AC 3 phase horizontal motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel copper wire of approved quality , tapping , insulating , varnishing with vernish heating polishing and re-fitting the same as before including carriage of the motor from respective scheme and complete with trial run as per direction of the Engineer-in-charge. |
| 2 | a) 20 HP |
| 3 | b) 25 HP |
| 4 | Supplying & fitting fixing of 20/25 Hp horizental motor fan |
| 5 | Supplying of fitting fixing of 20/25 Hp terminal plate for horizential motor |
| 6 | Supplying & fitting fixing of ball bearing of approved quality (TATA/SKF MAKE) for motor. |
| 7 | a) 6308 Ball bearing (TATA /SKF) |
| 8 | b) 6309 Ball bearing (TATA /SKF) |
| 9 | c) 6310 Ball bearing (TATA /SKF) |
| 10 | Labour charge of lifting of 10,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 90 feets with heavy duty chain pulley and block as per direction of the Engineer-in-charge. |
| 11 | Complete lifting |
| 12 | Complete re-winding of 400/440 volt AC 3 phase vertical submersible motor of different make after taking out of entire burnt copper wire and rewinding the motor with proper gauge of supper enamel insulated copper wire of approved quality , tapping , insulating refitting the same as before including carriage the motor from respective scheme and complete with trial run as per direction of the Engineer-in-charge. |
| 13 | a) 12.50HP - 22.50HP |
| 14 | Supplying & fitting fixing of rubber flange washer 6mm thick of approved quality as per direction of the Engineer-in-charge |
| 15 | a) 125 mm dia |
| 16 | b) 110 mm dia |
| 17 | c) 90 mm dia |
| 18 | Supplying & fitting fixing of submerssible cable(copper) of size upto 12mm of approved quality as per direction of the Engineer-in-charge |
| 19 | Labour charge for dismentalling and overhauling of 10,000 to 20,000 GPH water lubricated vertical submesible pump after taking out shaft etc. including necessary fittings of new & existing submersible materials as per direction of the Engineer-in-charge. |
| 20 | Supplying & fitting fixing of impeller of brass make for submersible pump 12.5 HP to 30 HP of approved quality as per direction of Engineer-in-Charge. |
| 21 | Supplying & fitting fixing of submerssible motor bush (Brass make) of approved quality as per direction of the Engg-in-charge |
| 22 | Providing & fitting fixing sand guard for submersible motor of approved quality as per direction of Engineer-in-Charge. |
| 23 | Providing & fitting fixing of thrust bearing with plate for submersible motor of approved quality suitable for different capacity motor as per direction of Engineer-in-Charge. |
| 24 | a) 12.50 - 30 Hp |
| 25 | Providing & fitting fixing of submersible pump bush (Brass make) for different capacity of approved quality as per direction of the Engineer-in-Charge. |
| 26 | Supplying & fitting fixing safety clamp as per direction of the Engg-in-charge. |
| 27 | Providing & fitting fixing of submersible shaft for different capacity of approved quality as per direction of the Engineer-in-Charge. |
| 28 | Providing & fitting fixing of submersible pump stainless steel sleeve for different capacity of approved quality as per direction of Engineer-in-Charge. |
| 29 | Providing & fitting fixing of submersible pump Coupling for different capacity of approved quality as per direction of Engineer-in-Charge. |
| 30 | Providing & fitting fixing of submersible pump neck ring for different capacity of approved quality as per direction of Engineer-inCharge. |
| 31 | Providing & fitting fixing of submersible pump column nut for different capacity of approved quality as per direction of Engineer-inCharge. |
| 32 | Providing & fitting fixing of submersible pump impeller key for different capacity of approved quality as per direction of Engineer-inCharge. |
| 33 | Labour charge for loweing & fifting fixing of 10,000 to 20,000 GPH water lubricated vertical submersible pump with motor including column assembly upto 90 feets with heavy duty chain pulley and block as per direction of the Engineer-in-charge.Complete lowering |
AI Tender Summary
Tender Timeline
Jul 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender