Tender For Restoration Of Different Mi Scheme Under Bagafa Block Under Water Resource Sub-Division Santirbazar, South Tripura Dist. During The Year 2023-24/ Restoration Of Pump Motor And Electrical Equipements Etc With Allied Works.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Aug 2023
0 days left
EMD
10859
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Restoration Of Different Mi Scheme Under Bagafa Block Under Water Resource Sub-Division Santirbazar, South Tripura Dist. During The Year 2023-24 / Restoration Of Pump Motor And Electrical Equipements Etc With Allied Works.
BOQ
| Sl. No. | Item Description |
| 1 | Repairing of starter including supplying & fixing of necessary finger,magnet coil,stop bottom ,start bottom etc. as per direction of Engg.- In - Charge. |
| 2 | Repairing of main switch in/c. replacement of 1 (one) no of kit cut etc. as per direction of Engg.- In - Charge. |
| 3 | a) 63 amps |
| 4 | b) 200 amps |
| 5 | Repairing of 200 amps busber in/c. supplying & fixing of 2(Two)nos copper strip of 300 mm long of approved quality and necessary nut bolt complete as per direction of Engg.- In - Charge. |
| 6 | Welding by gas or electric plant including transportion of plant at site etc. complete as per standard design. |
| 7 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality.150 mm dia |
| 8 | Supplying & fitting fixing manually operated oil immerged starter of approved qualitya) 30 Hp Osco/ BCH Make |
| 9 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge. External work40 mm dia. nominal bore |
| 10 | Repairing of main switch in/c. replacement of 1 (one) no of kit cut etc. as per direction of Engg.- In - Charge. |
| 11 | a. Current range 200 Amps |
| 12 | b. Current range 63 Amps |
| 13 | c. AC Ammeter SMI-144, Range 0-10A |
| 14 | d. AC Voltmeter SMI-144, Range 0-400 to 0-500 |
| 15 | e.200 Amps kitcut |
| 16 | f. 63 Amps kitcut |
| 17 | g. 7/16 copper wire (ISI marked) |
| 18 | h. Selector Switch |
| 19 | i.Magnet coil (30 HP starter) |
| 20 | j.Starter finger |
| 21 | Providing & fitting fixing of following equipment of approved quality as per direction of Engg - in - Charge. |
| 22 | a. 150 mm dia G.I bend |
| 23 | b. 125 mm dia. G.I bend |
| 24 | c. 150 mm dia MS Flange (10 mm thick) |
| 25 | d. 125 mm dia. MS flange (10mm thick). |
| 26 | e. 150mm dia. Flange washer(rubber) |
| 27 | f. 125 mm dia rubber flange washer |
| 28 | g. 150 mm dia MS hose Clamp(3 mm thick) |
| 29 | h. 150 mm dia C.I tail piece |
| 30 | i. 150 mm dia C.I. foot valve of approved quality |
| 31 | j. 150mm dia C.I foot valve weight |
| 32 | k. 150mm dia C.I foot valve ring |
| 33 | l. 150mm dia C.I foot valve net |
| 34 | m. 150 mm dia foot valve washer |
| 35 | n. Shaft sleeve nut (Cast Iron (CI)) |
| 36 | o. gland nut bolt |
| 37 | p. 40 mm dia fullway valve(Brass make) |
| 38 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. |
| 39 | a. 190 mmf |
| 40 | b. 225 mmf |
| 41 | Providing & fitting fixing sleeve bush /long bush of variouspumpsets of approved quality As per direction of Engg.- In - Charge |
| 42 | a. Mather & plant |
| 43 | b. Joyti |
| 44 | c. Kiloskar |
| 45 | Providing & fitting fixing C.I. gland of approved quality. |
| 46 | Providing & fitting fixing coupling star bush (All Size) of approved quality.150 / 190 / 225 |
| 47 | Dismentalling of motor for vernishing, heating etc. complete in/c reinstallation and trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge |
| 48 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling. |
| 49 | i) 6310 Ball bearing (TATA /SKF) |
| 50 | ii) 6309 Ball bearing (TATA /SKF) |
| 51 | iii) 6306 Ball bearing (TATA /SKF) |
| 52 | iv) 6305 Ball bearing (TATA /SKF) |
| 53 | v) 6206 Ball bearing (TATA /SKF) |
| 54 | Dismentaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineerin-Charge. |
| 55 | Providing & fitting fixing coupling star bush (All Size) of approved quality.150 / 190 / 225 |
| 56 | Providing & fitting fixing C.I. Impeller of approved quality for Horizontal pump |
| 57 | Labour charge for laying of G.I pipe conforming IS 1161,3589 & 1239 including fitting fixing complete as per direction of Engineer-inCharge. |
| 58 | Supplying following tools for day to day maintenance of pump sets and other accessories of TAPARIA make (Hammer 500grm.Sly Wrench big size,cutting plier,screw driver,dal wrench 14x15,16x17,18x19,20x21) |
| 59 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50X50X6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feetX1feetX2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engineer-in-Charge. |
| 60 | Labour charge for removal of deposited silt clay etc. from pump house & cleaning by water jetting or any suitable method as per direction of Engg-In-Charge. |
| 61 | Labour charge for cleaning of clay,silt etc.washing of all electrical equipment of panel board by petrolor any suitable method as per direction of Engg-In-Charge. |
| 62 | Providing and filling of Transformer Oil of approved quality into well immersed star delta starter of as per direction of the Engg-In-Charge. |
AI Tender Summary
Tender Timeline
Jul 20, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender