}

Tender For Carrying Out Different Electric Line Work Under Full Deosit In The Area Of Ee, Eudd Ii, Mathura In The Jurisdiction Of The Superintending Engineer, Electricity Urban Distribution Circle, Mathura, mathura-Uttar Pradesh

Dakshinanchal Vidyut Vitran Nigam Limited has published Tender For Carrying Out Different Electric Line Work Under Full Deosit In The Area Of Ee, Eudd Ii, Mathura In The Jurisdiction Of The Superintending Engineer, Electricity Urban Distribution Circle, Mathura. Submission Date for this Tender is 31-07-2023. Electrification Work Tenders in mathura Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

38728956
Tender For Carrying Out Different Electric Line Work Under Full Deosit In The Area Of Ee, Eudd Ii, Mathura In The Jurisdiction Of The Superintending Engineer, Electricity Urban Distribution Circle, Mathura
Tender
Indian
Uttar Pradesh
Mathura
31-07-2023

Tender Details

Tender For Carrying Out Different Electric Line Work Under Full Deosit In The Area Of Ee, Eudd Ii, Mathura In The Jurisdiction Of The Superintending Engineer, Electricity Urban Distribution Circle, Mathura- 1 Cartage Of Following Material From Store Centre, Mathura To Work Site. 2 St Pole / Pcc Pole ( 11 / 9 / 8.5 Mtr. Long ) 3 Lt Xlpe Cable Of Size 3.5X240 / 150 / 95 / 70 Sq.Mm. 4X50 Sq.Mm. 4 Lt Pvc Cable Of Size 1X630 Sq.Mm. 5 11Kv Xlpe Cable Of Size 3X300 / 240 / 185 / 120 / 70 Sq.Mm. 6 33Kv Xlpe Cable Of Size 3X185 / 120 / 50 Sq.Mm. 7 Dog / Weasel Conductor 8 Lt Aerial Bunch Conductor. 9 Other Line Material Such As Cross Arm, Ms Top Channel, Acsr Dog / Rabbit / Weasel Conductor, Insulator, Clamps, Nut & Bolts Etc. 10 Digging Of Pit & Erection Of New Single Support St Pole ( 11 / 9Mtr. Long ) For 33Kv Line Including Grouting Of Pole And Fixing Of All Clamps, Cross Arm, Pin / Disc Insulator & Other Accessories As Per Relevant Drawings. Any Fabrication If Required For Above Support. 11 Digging Of Pit & Erection Of New 11 / 9 Mtr. Double St Pole Structure For 33Kv Line Including Grouting Of Pole And Fixing Of Top Channel, Dropper Channel, Insulators & Other Accessories As Per Relevant Drawings & Any Fabrication If Required For Above Support. 12 Digging Of Pit & Erection Of New 11 / 9 Mtr. Triple St Pole Structure For 33Kv Line Including Grouting Of Pole And Fixing Of Top Channel, Dropper Channel, Insulators & Other Accessories As Per Relevant Drawings & Any Fabrication If Required For Above Support. 13 Digging Of Pit & Erection Of New Single Support St Pole ( 11 / 9 Mtr. Long ) For 11Kv Line Including Grouting Of Pole And Fixing Of All Clamps, Cross Arm, Pin / Disc Insulator & Other Accessories As Per Relevant Drawings. Any Fabrication If Required For Above Support. 14 Digging Of Pit & Erection Of New Single Support Pcc Pole ( 8.5Mtr. Long ) For 11Kv Line Including Grouting Of Pole And Fixing Of All Clamps, Cross Arm, Pin / Disc Insulator & Other Accessories As Per Relevant Drawings. Any Fabrication If Required For Above Support. 15 Digging Of Pit & Erection Of New Double St Pole Structure ( 11 / 9 Mtr. Long ) / Pcc Pole ( 8.5Mtr. Long ) For 11Kv Line / Transformer Including Grouting Of Pole And Fixing Of Top Channel, Dropper Channel, Insulators & Other Accessories As Per Relevant Drawings & Any Fabrication If Required For Above Support. 16 Digging Of Pit & Erection Of New Triple St Pole Structure ( 11 / 9 Mtr. Long ) For 11Kv Lineincluding Grouting Of Pole And Fixing Of Top Channel, Dropper Channel, Insulators & Other Accessories As Per Relevant Drawings & Any Fabrication If Required For Above Support. 17 Digging Of Pit & Erection Of New Four St Pole Structure ( 11 / 9 Mtr. Long ) For 11Kv Lineincluding Grouting Of Pole And Fixing Of Top Channel, Dropper Channel, Insulators & Other Accessories As Per Relevant Drawings & Any Fabrication If Required For Above Support. 18 Digging Of Pit & Erection Of New Single Support St Pole ( 11 / 9 Mtr. ) For Lt Line On Abc Including Grouting Of Pole And Fixing Of All Clamps, Insulator & Other Accessories As Per Relevant Drawings. Any Fabrication If Required For Above Support. 19 Digging Of Pit & Erection Of New Single Support Pcc Pole ( 8.5 Mtr. ) For Lt Line On Abc Including Grouting Of Pole And Fixing Of All Clamps, Insulator & Other Accessories As Per Relevant Drawings. Any Fabrication If Required For Above Support. 20 Earthing Of St Pole By M.S Earth Rod. 21 Painting Of St Pole. 22 Digging Of Pit & Erection Of Stay Rod With Grouting Cement Sand And Brick Ballast Including Nuzzling, Binding Complete. 23 Laying Of 33 / 11Kv Line On Dog / Weasel Conductor On Erected Poles. 24 Guarding Of 33 / 11Kv Line. 25 Fixing Of 33 Kv Fuse Set. 26 33 Kv Fuse Set Structure. 27 Prividing And Fixing Of 33 Kv Cable Jointing Kit O / D & I / D 3X120 / 185 Sq.Mm. 28 Provding And Fixing Of 33 Kv Cable Straight Through 3X185 Sq.Mm. 29 Providng And Fixing Of Lt Xlpe Cable 3.5X240 / 150 / 50 Sq.Mm. Straight Through. 30 Line Isolator 800 Amp. 31 Structre For Line Isolator 800 Amp 32 33 Kv Post Isolator. 33 11 Kv D.O. Fuse Set. 34 Providing And Fixing Of Aluminium Lug 240 / 150 / 50 / 630 Sq.Mm. 35 Laying Of Ab Conductor For Lt Line On Erected Poles. 36 Layng Of Lt Xlpe Cable. 37 Providing & Laying Of Hdpe Pipe Of Dia 160 Mm Through Trenchless Method For Laying Of Cable By Horizontal Boring Machine Below The Ground Level Of 1.0 To 1.5 Mtr. 38 Laying Of Underground 33 / 11Kv Xlpe Cable Of Size ( 3X300 / 240 / 185 / 120 / 70 Sq.Mm ) Inside Hdpe Pipe. 39 Digging Of Trench By Excavation Of Earth 0.90 / 1.5 Mtr. Deep Put Brick On Both Side, Filling Of Sand & Brick On Cable & Earth Ramming And Dressing Properly With Complete Job For Laying 11 Kv / 33 Kv Xlpe And Lt Cable In Trench. 40 Instaollation Of Distribution Box On St Pole / Pcc Pole For Ab Conductor. 41 Providing & Fixing Of G.I Pipe Of Diameter 6 Inch For Riser. 42 Jointing Of Cable With Another Cable / Overhead Line At The D / P Structure Through 33 / 11 Kv Outdoor Cable Jointing Kit ( Filling Of Cable Box ) . 43 Stringing Of Lt / Ht Xlpe Cable. 44 Installation Of 33 Kv Vcb I / C Ctr 800A / 750 Mva. 45 The Construction Of New Plinth Of Size 5’X5’X4’ Aboveground Level And One Ft. Below The Ground Level For 400 / 250 Kva Transformer 46 Removal Of Old Transformer ( 400 / 250Kva ) With All Connecting Accessories From Existing Plinth And Shifting & Installation Of Transformer With All Connecting Accessories To The Newly Constructed Plinth Including Jumpering Etc. 47 Removal Of Old Transformer ( 100 / 63 / 25 / 16 Kva ) With All Accessories From Existing Double Pole And Shifting & Installation Of Transformer With All Connecting Accessoriesto The Newly Constructed Double Pole Including Jumpering Etc. 48 Installation Of Following Transformer On Plinth / Double Pole With All Connecting Accessories Jumering Etc. Including Carriage Of Transformers From Store Centre, Mathura To Work Site. 49 33 / 0.4 Kv, 250 Kva Transformer On Plinth. 50 400 Kva Transformer On Plinth. 51 250 Kva Transformer On Plinth. 52 100 Kva Transformer On Double Pole Structure. 53 63 Kva Transformer On Double Pole Structure. 54 25 Kva Transformer On Double Pole Structure. 55 11 / 0.4 Kv, Single Phase 16 / 10 Kva Transformer On Singh Pole Structure. 56 Installation Of 11 Kv Ct / Pt Combined Unit On Erected Double Pole Structure. 57 Installation Of Pilfer Proof Metering Cubicle. 58 Construction Of M.S Angle Fencing Of Size ( 3M X3m X2m ) Around The Plinth Of 400 / 250Kva Transformer And Gap Between The M.S Angle Should Not Be More Than 65Mm. 59 Complete Chemical Earthingof 11 / 0.4 Kv, 250 / 400 Kva Distribution Transformer By Digging Pits 6” Dia Upto 3 Mtr. Deep Including Chemical Filled Pipe In Between ( Pipe-In-Pipe ) Isi Mark B Grade & Connecting With G.I Strip Of Size 50Mm X 6Mm With Neutral / Body Of 11 / 0.4 Kv Distribution Transformer To Above Pipe-In-Pipe ( Pip ) And Filling Of Chemical Crystalline Conductive Mixture Containing Highly Conductive Material Around The ( Pipe-In-Pipe ) Up To 3 Mtr. Including Making Of Chamber At The Top Of The Earthing. Other Details Are As Below:-1. Earth Pipe Material – Mild Steel, Galvanized.2-Main Electrode Diameter – 42.4Mm.3-Auxiliary Electrode Pipe, Diameter – 76Mm. 4-Wall Thickness Of Main Electrode: - 2.6Mm.5-Wall Thickness Of Auxiliary Hole: - 3.2Mm.6- Length Of Earthing Electrode ( Pip ) :- 3 Meter. 60 Earthing Of Indoor Unit Of 33 / 11 Kv Vcb Pannel, 33 / 0.4 Kv, 250 Kva T / F B Digging Of Pit Up To Water Level Depth Approx. 90 Feet. Into The Boring 1-1 / 4 Dia Gi Pipe Of B Grade, Conforming To The Requirement Of Is Specification And Then Connecting Top Of The Insrted Pipe And Distribution Transformer Body Earthing Through M.S. Strip Of Size 50X6mm With The Help Of Electric Welding Lum Sum Rate. It Includes The Cost Of All Material, Labour, T&P, Carrier Etc. Required For Proper Completion Of Work. 61 Dismantling Of Single Support St Pole / Pcc ( 11 / 9 / 8.5Mtr. ) Pole With Complete Accessories And Cartage Of Material From Work Site To Store Center, Mathura. 62 Dismantling Of 33 / 11Kv Line And Cartage Of Material From Work Site To Store Centre, Mathura. 63 Dismantling Of Lt Line And Cartage Of Material From Work Site To Store Centre, Mathura

Key Value

Document Fees
INR 3000 /-
Tender Value
INR 20 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail