|
| 1 | MATERIAL |
| 2 | Rubble |
| 3 | Stone ware pipe 150mm dia |
| 4 | Steel centering for foundation. (per Cum of concrete |
| 5 | Electic cibrator |
| 6 | aggregate 40 mm (hand broken) blasted |
| 7 | Stone Aggregate (single size) 12.5 mm nominal size |
| 8 | Stone Aggregate (single size) 20 mm nominal size |
| 9 | Coarse Sand as per IS: [email protected] cum/cum of Concrete |
| 10 | portland Cement |
| 11 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 12 | Steel centering for columns/ Pillars (per Cum of concrete) |
| 13 | Steel shuttering for Lintels, Beams, Girder, Plinth beam, Cantilever (per Cum of concreate) |
| 14 | Binding wire |
| 15 | steel TMT FE 500 |
| 16 | Coarse sand (Zone III) |
| 17 | Bricks |
| 18 | Fine sand (Zone IV) |
| 19 | Terpentine |
| 20 | hold fast iron 300*40*5 mm |
| 21 | first class teak wook in planks |
| 22 | Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/litre |
| 23 | Coal Tar |
| 24 | Structural steel such as tees, angles , channels and R. S. joists |
| 25 | Metal Primer ( U. G.) |
| 26 | Enamel paint |
| 27 | Lock for sliding shutter |
| 28 | nylon/pvc gasket |
| 29 | Ball bearing for rolling shutters |
| 30 | Neoprene /EPDM rubber gasket |
| 31 | All drive screws (for gypsum board) |
| 32 | Frosted glass sheet or norminal thickness 4 mm |
| 33 | turpentine oil |
| 34 | steel primer |
| 35 | Superior class teak wood such as Dandeli, Balarshah or Malabar in planks |
| 36 | Steel shutteing for roof, landing, balcony having 12.5 cm Tr (per cum of concrete) |
| 37 | Water proofing materials |
| 38 | S. C. I. gully or nahani grating 100 mm dia |
| 39 | plumber with tools skilled |
| 40 | Vitreous China orrisa tyoe w. c. pan size 580 mm |
| 41 | UPVC pipes (working pressure 4 kg / cm2 ) single socketed pipe 75 mm dia |
| 42 | water tank H. D. P. conteainer syntex or alike |
| 43 | G. I pipes 50 mm dia |
| 44 | G. I. pipes 25 mm dia |
| 45 | cpcv pipe 15 mm dia |
| 46 | Hum Prope |
| 47 | cpcv pipe 25 mm dia |
| 48 | Socket for 20 mm tap |
| 49 | Bib cock stop tap brass heavy 20 mm |
| 50 | P. V.C Connector 15 mm dia |
| 51 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with lenth not less than 700 mm i/c PVC waste fittings |
| 52 | Piller tap 12 mm dia. Chromium plated heavy |
| 53 | Stop tap brass with crunch wheer 15 mm dia. |
| 54 | socket brass for 32 mm tap |
| 55 | White glazed wash hand basin (50*50) cm |
| 56 | C. I. bracket for wash basin and sinks |
| 57 | Brick bats |
| 58 | White cement based putty |
| 59 | Vitrified tile ( Matt finish). Size 590 to 605mm * 590 to 605 mm * 8 to 10 mm. |
| 60 | Tile cutting machine |
| 61 | Ceramic Glazed Tiles 1st quality minimum thickness 5 mm in all clours shade and designs exceptburgundy, bottle green black |
| 62 | Stainless steel sink of size 600*510*200 mm of nirali or equivalent make |
| 63 | bottle track chromium plated 32 mm dai |
| 64 | lead pipe 32 mm dia. |
| 65 | Chromimum plated 12 mm dia. Bib cock |
| 66 | G. I Screw 75 mm |
| 67 | both side polished kadappa stone 25 mm dia |
| 68 | joint cutting machine with 2-3 blades |
| 69 | plastic emulsion paint |
| 70 | Kota stone slab 20 mm to 25 mm thick(semi-polished) |
| 71 | White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area |
| 72 | Vibrator (Needle type 40 mm) |
| 73 | Interlocking C. C. paver block ( 60 mm thick, M-30) |
| 74 | soft murum |
