Restoring Leakages From Repair Of 63Mm, 90Mm, 110Mm, 160Mm, 200Mm, I/D (6Kgf/Cm2) Size Pvc Pipe Line In Various Villages Including Earthwork In Excavation, Cutting Of Pipe Line, Jointing Of Pipeline With Ci/Pvc D-Joints, Pvc Pipes And All Other Contingent
Tender Value
9.90 Lakhs
Estimated cost
Bid Submission
28 Jul 2023
0 days left
EMD
19810
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
anandpur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Restoring Leakages From Repair Of 63Mm, 90Mm, 110Mm, 160Mm, 200Mm, I / D ( 6Kgf / Cm2 ) Size Pvc Pipe Line In Various Villages Including Earthwork In Excavation, Cutting Of Pipe Line, Jointing Of Pipeline With Ci / Pvc D-Joints, Pvc Pipes And All Other Contingent Works Therefore Complete In All Respect. Under The Jurisdiction Of Various Schemes Of Water Supply & Sanitation Sub Division No.1 Sri Anandpur Sahib ( S:556 )
BOQ
| Sl. No. | Item Description |
| 1 | Excavationmanually in trenches for pipe line with straight oropening cuttingin street & lanes complete in all respect (For all dia pipes) |
| 2 | 63 mm o/d 1x1.25x15 |
| 3 | 75 mm o/d 1x1.25x15 |
| 4 | 90 mm o/d 1x1.25x50 |
| 5 | 110mm o/d 1x1.25x50 |
| 6 | 160mm o/d1x1.25x50 |
| 7 | 200 mm i/d1x1.25x40 |
| 8 | Providing, laying, fixing of jointing of P.V.C. pipes as per IS-4985 (ISI marked with the priorapproval of Engineer-in-charge) along the Trenches and laying the same in cutting, jointing and testing complete as per specifications,excluding cost of excavation complete. |
| 9 | 63 mm i/d (6kgf/cm2) |
| 10 | 75 mm i/d (6kgf/cm2) |
| 11 | 90 mm i/d (6kgf/cm2) |
| 12 | 110 mm i/d (6kgf/cm2) |
| 13 | 160 mm i/d(6kgf/cm2) |
| 14 | 200 mm i/d (6kgf/cm2) |
| 15 | Providing, laying, fixing and testing M.S. pipe lines as per IS-1239 and specials such as tees, bends, sockets, elbows etc. in trenches in the ground including cutting, threading and testing etc. complete. |
| 16 | 80 mm internal diameter (thickness 4.05 mm) |
| 17 | 100 mm internal diameter (thickness 4.50 mm) |
| 18 | 150 mm internal diameter (thickness 4.85 mm) |
| 19 | 200 mm internal diameter (thickness 6 mm) |
| 20 | Supplying and fixing of ISI marked CID-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting, jointing and testing etc. but excluding cost of excavation complete. |
| 21 | 63 mm |
| 22 | 75mm & 80 mm |
| 23 | 100 mm |
| 24 | 150 mm |
| 25 | 200 mm |
| 26 | Supplying and fixing of ISI marked PVC D-jointfor repair of PVC pipe line excluding cost of excavation complete in all respect. |
| 27 | 63 mm |
| 28 | 75 mm |
| 29 | 90 mm |
| 30 | 110 mm |
| 31 | Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engieer-in-charge. |
| 32 | Connection with pipe line up to 300 mm i/d |
| 33 | Providing and fixing MS Bend complete. |
| 34 | Providing and fixing MS Bend flange complete. |
| 35 | Providing and fixing Flange tee complete . |
| 36 | Making connection with existing pipe line |
| 37 | Welding on MS pipe of 150 mm i/d size complete |
| 38 | P/F New spindle road 3\" |
| 39 | P/F New spindle road 4\" |
| 40 | P/F New spindle road 6\" |
| 41 | Dismantling of cement concrete 80 mm thick concrete 1:2:4 over 100 mm thick CC 1:8:16 and making good the same 1 its original condition complete in all repect as per analysis attached.Respect as per analysis attached. |
| 42 | Renting and carriage of DG set with diseal for the repair of pipe line of various Dia. |
| 43 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge) |
| 44 | 80 mm I/d |
| 45 | 100 mm I/d |
| 46 | 150 mm i/d |
| 47 | Proving & fixing ISI Marked Non-return valvesflanged end class PN-1.0 as perIS:5312/2004 in pipe lines including jointing& cost of Nut Bolt , rubber insertion etc.complete.Note: If Non-return valves class PN-1.6 isused instead of class PN-1.0 , than 5% willbe paid extra. |
| 48 | Class PN-1.0 as per ISI with rubber Flap |
| 49 | 80mm i/d Non-return valve |
| 50 | 100mm i/d Non-return valve |
| 51 | 150mm i/d Non-return valve |
AI Tender Summary
Tender Timeline
Jul 19, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender