Tender For Provn Of Interlocking Tiles Hardstanding (150 Sqm) Alongwith Connected Item Behind Bldg No P-34 & P-35 At 502 Asc Bn, Tiling For Varandah Of Or Living Accn (Bldg No P-24, P-25 & P-26) Of 2 Mtn Div Sig Regt, Hard Standing Near Auditorium At Aps,
Tender Value
37.95 Lakhs
Estimated cost
Bid Submission
07 Aug 2023
0 days left
EMD
75900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dinjan → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Interlocking Tiles Hardstanding ( 150 Sqm ) Alongwith Connected Item Behind Bldg No P-34 & P-35 At 502 Asc Bn, Tiling For Varandah Of Or Living Accn ( Bldg No P-24, P-25 & P-26 ) Of 2 Mtn Div Sig Regt, Hard Standing Near Auditorium At Aps, Tiles In Or Living Bldg No P-79 Of 671 Army Avn Sqn ( R&O ) And Replacement Of Iron Mosquito Net At Sick Animal Line In 11 Mfvh ( Fly Proofing 82 Mtr Length X 2.5 Mtr Height - 250 Mtr ) At Dinjan Mil Stn Under Ge Dinjan
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n.exc 0.5 Cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in hard standing or hard/dense soil complete all as specified and as directed. |
| 2 | M&L for plain cement concrete(1:3:6) type C-2, (using 40 mm graded stone aggregate) as in foundation filling and mass concrete, etc complete all as specified and as directed. |
| 3 | M&L for plain cement concrete(1:3:6) type C-2, (using 40 mm graded stone aggregate) as in surface channels and drains, etc complete all as specified and as directed. |
| 4 | M&L for plain cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, etcincluding necessary form work complete all as specified and as directed. |
| 5 | S&F for rolled mild steel in steel worktubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 6 | M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment complete all as specified and as directed. |
| 7 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 8 | S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed.Note : Colour of ridge shall be same colour as that of sheet used for roof. |
| 9 | M&L for 100 mm thick plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in sub base of floor, etc complete all as specified and as directed. |
| 10 | M&L for machine pressed precast conctete interlocking paver block, design & shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including 75 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. complete all as specified and as directed. |
| 11 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 12 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 13 | M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar in (1:4) complete all as specified and as directed |
| 14 | M&L for Reinforced Cement Concrete 1:2:4, type B-1 (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified anddirected.(Note : reinforcement shall be measured and paid separately against respective item). |
| 15 | S&F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 16 | S&Fform work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed. |
| 17 | M&L for 75 mm thick plain cement concrete (1:3:6), type C2, (using 40mm graded stone aggregate) as in plinth protection, finishing surface even and smoothwithout using extra cement, complete all as specified and as directed |
| 18 | M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed. |
| 19 | M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 20 | M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and as directed. |
| 21 | Cutting holes into or through brick walls exceeding 150Sqcm but not exceeding 400 Sqcm,built in lime or cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 22 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed. |
| 23 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 24 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in (1:6) for laying floor finishes complete all as specified and as directed |
| 25 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting etc. over 10 mm thick back coat of cement mortar in (1:4),set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 26 | M&L for preparing newly plastered surfaces ofbrick work or previously untreated surface of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 27 | Surface dressing not exceeding 15 cm deep as in soft/loose soil including removing the materials to a distance not exc 50m and spraying pesticides to control grass growth complete all as specified and as directed. |
| 28 | M&L for hardcore of broken stone aggregate of guage n.exc 63mm , deposited, spread and levelled in layers n exc. 15 cm thick, consolidated, watered and rolled/rammed to a true surface |
| 29 | M&L providing 100 mm thick plain cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub-floor, sub-bases of floor, floor topping, pavings etc and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as inlintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, etcincluding necessary form work complete all as specified and as directed. |
| 31 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces as in walls in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 32 | Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all costs such as royalty if any transportation taxes etc. for area filling / forming including raising earth spreading in layers not exc 30 cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high / depth from EGL. Notes:- (i) Earth required for the item shall be suppied by contractor out side MOD land of any lead at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc. shall be deemed to be included in the unit rate quoted by the contractor.(iii) with reference to clause 3.6 of MES schedule Part-II on serial page no- 21 it is clarified that measurement of the above item shall be finished embankment/ traverse of filled earth after consilidation/ copmaction and 5% deduction shall be made from measured and calculeted volume to allow for increase in bulk. (iv) Total quantity/ partial of earth may not be available in Dinjan area. The contractor shall bring the earth outside area it is advised to quoted the rate considering availability of soil and its lead involved. |
| 33 | M&L for 25 mm thick plain cement concrete, (1:2:4) type B-0 (12.5mm graded aggregate) in under layer of of tiles flooring & finishing the surface rough to receive screed bed complete all as specified and as directed. |
| 34 | S&F in repairs Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 35 | M&Lrolled mild steel framed workas in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete ; steel confirming to Fe-410-W(Gde E-250), quality \"B\"all as specified and as directed. |
| 36 | S& F rolled mild steel work Fe-410-W (grade E-250) quality A as in joints, channel, angle or tee sections, plates fixed independently with or without connecting plates etc out to required length and shape incl necessary welding, drilling, jointing with MS nuts, bolts & washers etc. |
| 37 | M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for embedding hold fast, bed block, cills, etcincluding necessary form work complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Jul 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender