Tender For Strengthening Of Block Level Brooder House Along With Establishment Of One Hatchery Unit For Augmentation Of Poultry Production Under Nec-2022-2023 Or Repairing Of Blbh At Jirania Under West District
Tender Value
11.51 Lakhs
Estimated cost
Bid Submission
07 Aug 2023
0 days left
EMD
23034
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jirania → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Strengthening Of Block Level Brooder House Along With Establishment Of One Hatchery Unit For Augmentation Of Poultry Production Under Nec-2022-2023 Or Repairing Of Blbh At Jirania Under West District
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:- Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge:-In cement mortar |
| 3 | Removing mortar from brick and cleaning bricks including stacking bricks and disposal rubbish with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge:-In cement mortar. |
| 4 | Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-charge |
| 5 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for replastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc. complete as per direction of the Engineer- incharge. |
| 6 | Dismantling steel work in built up section manually / mechanically without dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc. complete as per direction of the Engineer- in-charge. |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil. |
| 8 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size). |
| 10 | Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 5.10 kg per sqm. To outside fencing filled with M.S. Angle or flat frame by electric welded as per direction of the Engineer-in- Charge (Frame work to paid separately). |
| 11 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usingsteel etc. complete as required:-In grating, frames, guard bar, railing, brackets, gates and similar works, all complete. |
| 12 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 13 | Fitting and fixing of G.S sheet roofing walling etc. fixed with galvanized from J or L hooks, bolt and nuts 8 mm dia. With bitumen and G.I limpet washers complete excluding the cost of G.I sheet and wood work etc. Complete (old G.S sheet will be supplied departmentally at free or cost). |
| 14 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumenwashers complete.0.63mm thick with zinc coating not less than 275gm/m2 |
| 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 16 | Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete.40 mm thick with 20 mm stone aggregate |
| 17 | 12 mm cement plaster of mix:Cement mortar 1:4 (1 cement : 4 fine sand) |
| 18 | 15 mm cement plaster on the rough side of single or half brick wall of mix:Cement mortar 1:4 (1 cement : 4 fine sand) |
| 19 | 12 mm cement plaster of mix: Cement mortar 1:4 (1 cement : 4 fine sand)including Neat cement punning |
| 20 | 15 mm cement plaster on the rough side of single or half brick wall of mix:Cement mortar 1:4 (1 cement : 4 fine sand) including Neat cement punning. |
| 21 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishingand reinforcement-1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size). |
| 22 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size). |
| 23 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 24 | Centering shuttering including struttings, propping etc.and removal of form work for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 25 | Drilling and boring pilot hole in soil strata by manual means, collection of soil samples of different strata met with during at various suitable levels, preservation of sample in polythene bags/sample boxes and disposal of excess soil of mud, including the cost for water etc. As required to maintain the pitot hole properly as per specification and direction of the Engineer-in-Charge. |
| 26 | Reaming of pilot hole to an enlarged bore hole in any soil strata by manual means, disposal of excess soil of mud, including the cost for water etc. As required to maintain the bore hole properly as per specification and direction of the Engineer-in-Charge |
| 27 | Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-Charge. |
| 28 | Providing and lowering of UPVC pipe as per IS 12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-Charge |
| 29 | Providing and lowering of UPVC pipe as per IS 12818 after washing of the bore hole by manual means as per specification and direction of the Engineer-in-charge.-75 mm dia‘CM’ casing pipe |
| 30 | Providing and shrouding of the deep tube well assembly with washed pea gravels (2.0-4.75)mm effective size)as per specification (IS:4097)and direction of the Engineer-in-charge |
| 31 | Providing & installation of 1H.P submersible pump (Make- Kirloskar, Crompton, Duke etc 15 stage, outlet diameter32mm, Single Phase) including panel board set etc. complete. |
| 32 | Providing and connection with submersible pump set (motor of submersible cable joint less (2.50cm/flat/20amp) |
| 33 | Providing and fixing UPVC Columnpipes complete with fittings and clamps, including lowering the same complete as per Direction of the Engineer-in-charge.-25 mm nominal bore |
| 34 | Providing and fitting, fixing safely/ rest clamp as per required size of approved quality with nuts and bolt etc. Complete as per direction of the Engineer-in-charge |
| 35 | Providing and fixing of G.I bend of appd. Quality complete |
| 36 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. |
| 37 | Providing and fixing ball valve (brass) of approved quality High of low pressure, with plastic floats complete:25 mm nominal bore |
| 38 | Providing and fitting fixing with PVC insulated single core multistories copper cable conforming to IS : 694 for inter connection with all electrical equipments of the panel board as per specification and direction of the Engineer-in –Charge. |
| 39 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 40 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of TestCertificate issued by the Manufacturer] :New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 41 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issuedby the Manufacturer] :New work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm. |
| 42 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 43 | Finishing walls with textured exterior paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of TestCertificate issued by the Manufacturer]:Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture |
| 45 | Hiring charge for vehicle Maruti Omni/Maruti Wagon/Maruti Eco etc. (Haltage and milege) will be recorded and signed by both the Engineer-in-charge and the agency. |
| 46 | Transportation charge for work supervision by Maruti Omni/Maruti Wagon R/Maruti Eco (As needed time by the Engineer-in-charge the agency will arrange vehicle as mentioned above at his own cost and risk. |
AI Tender Summary
Tender Timeline
Jul 18, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender