Tender For Construction Of Extension In Control Room Inside 132 33 Kv Grid S S At Tentulikhunti.
Tender Value
17.47 Lakhs
Estimated cost
Bid Submission
17 Aug 2023
0 days left
EMD
17500
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tentulikhunti → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Extension In Control Room Inside 132 33 Kv Grid S S At Tentulikhunti.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Aug-2023 | DATE EXTENDED | Date | 17-Aug-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Supplying all labour for dismantling cement concreteincluding stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 2 | Earthwork in excavation in ordinary soil onfoundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoringand shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge. |
| 3 | Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge. |
| 4 | Cement concrete with (1:3:6) in foundation and floors using 40 mmsize blackhard crusher broken granite stone metal of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 5 | RCC (1:1.5:3) in following works and using 12 mmsize blackhard crusher broken granite stone chips of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 6 | In F & P |
| 7 | Column and Beam in SS |
| 8 | RCC Slab |
| 9 | RCC Lintel |
| 10 | RCC Chajjah |
| 11 | RCC Wall |
| 12 | Supplying,fitting,fixing of MS rod or tor steel including straightening ,cutting,bending, binding by using binding wire of18-20 gauze, molding, welding, jointing if necessary and placing in position as per drawing & technical specification( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labourT & P required etc complete as per direction of Engineer in charge. |
| 13 | Flyash brick masonry in cement mortar ( 1:6 )in F&P using of size(23 X11X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength notless than 35Kg/cm2after immersing the bricks for six hours in water before use,including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc completeincluding cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
| 14 | Flyash brick masonry in cement mortar ( 1:6 )in Superstructure using of size(23 X11X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength notless than 35Kg/cm2after immersing the bricks for six hours in water before use,including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc completeincluding cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
| 15 | 12 mm thick cement plaster with cement and sand mortar (1:4 ) finished smooth over outside rough surfaces of brick masonry walls etc with wateringand curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 16 | 16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls etc with wateringand curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
| 17 | Cement concrete with (1:1.5:3) in foundation and floors using 12 mmsize blackhard crusher broken granite stone chips of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 18 | 2.5 cm thick grading concrete(1:2:2) with water proofing compoundusing 6mm downsize blackhard crusher broken granite stone chips of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required levelincluding cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 19 | Supplying G.I.Door,Window made out of G.I.Angle & Square bar of approved design and specification with all cost conveyance taxes etc. complete.As per the direction of the E.I.C. |
| 20 | Painting two coats withsynthetic enamel paints over a coat of red oxide primer to irondoors and windos with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge |
| 21 | Painting two coats with weather coat (I.S.I) paint on wall surface over a coat of primer of berger make with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge.(Data for10.00 Sqm.)For Ground Floor. |
| 22 | Providing for supplying, fitting and fixing vitrified tile in floors of size 600mm x 600mm of approved make andof approved quality and shade laid on floors using 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including cost conveyance taxes of all materials and cost conveyance of all labour with T&P etc. complete in all floors in all respects as per direction of Engineer-in-Charge. |
| 23 | Finishing wall surface with cement based wall putty of approved quality and make and finished smooth etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of alllabour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 24 | Wall paintingtwo coats with a plastic emulsion paint of approved shade (BRAND-ASIAN paint 7907 candle wick) over wall surfacefinished smooth to give an even shade including watering,curing etc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of alllabour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 25 | Supplying fitting & fixing of false ceiling with alluminium anodized T-section No. 3215with 2\" center to center L-section No. 1705up to 15 micron on 4 walls to be fixed by means of steel screw & PVC plugs and the alluminium grid 2\" x 2\" sustainded from ceiling with 12 mm thick prelaminated bard/6mm thickV board etc completeincluding cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 26 | Providing,fitting and fixing of alluminium door with OEL anodized Al. door sectionof 9202 as vertical member ,9201 as top member and 9200 as bottom & middle member and 6 mm thick glass on top & 12mm thick prelaminated board in bottom fixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 etccomplete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 27 | Supplying,fitting and fixing of sliding window made of alluminium section 9778 as windows frame , section no. 4095 ,4096 and 9777 ,3994 as shutter frame with 5 mm thick black glass as panel fitted withrubber bidding including all fitting & locking arrangement complete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 28 | Supplying,fitting and fixing of 5.5 mm thick hexagonalAluminium jallyin windows as single groove,double groove & tapered clip ashorizontal & vertical member for fixing of Aluminium Jally & jointing angle conforming to standard aluminium sec tions etc. complete including cost, conveyanceand taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 29 | Providing,fitting and fixing of alluminium sliding door with OEL anodized Al. door sectionof 9202 as vertical member ,9201 as top member and 9200 as bottom & middle member and 12mm thick prelaminated boardfixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 etccomplete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 30 | Supplying all labour for dismantling brick workincluding stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
| 31 | Priming one coat on wall surface with a primer of approved sadeetc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of alllabour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 32 | Providing fitting and fixing of 600 x 600 mm 36 W Led light in ceiling surface of approved makeetc complete including cost,conveyance,taxes of all materials and cost,conveyance,taxes of alllabour with T&P required etc complete in all respects as per the direction of Eng.-in-charge. |
| 33 | Supplying all material and labour required for providing centering and shuttering works in F & Petc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
| 34 | Supplying all labour with t & P required for removal of excess earth by mechanical means up to a distance of 5 KM including cost taxes of all labour with T & P required etc complete in all respect as per direction of EIC. |
AI Tender Summary
Tender Timeline
Aug 08, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 17, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 17, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender