Tender For Construction Of Model School New Work At Zpps Gavandara Tq.Dharur Dist. Beed
Tender Value
44.80 Lakhs
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
44806
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Model School New Work At Zpps Gavandara Tq.Dharur Dist. Beed
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for foundation in earth, soils of all types sand, gravel and soft murum including removing the excavated material upto a distance of 50 m. beyond the building area and all lifts stacking and spreading as directed, dewatering, shoring, structing andpreparing the bed for the foundation and necessary back filling, ramming, watering (Including shoring and strutting) etc. complete. (Lift Upto 3.00 Metre)Spec. No. : Bd.A 1 Page No.259(S.S.R 2020-21 Item No 21.01 ) |
| 2 | Providing soling using 80 mm size trap metal in 15 cm.layer including filling voids with sand/grit ramming, watering complete. Additional Item Spec.No. : As directed by Engineer in charge.(S.S.R. 2020-21 Item.No. 21.40 ) |
| 3 | Providing and laying in situ cement concrete M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compacting and curing complete. with fully automatic micro prosessor based PLC with SCADA enabled reversible Drum Type Mixer, with natural sand.Spec.No. : Bd.E.1 Page No.287(S.S.R. 2020-21 Item.No. 24.01) |
| 4 | Providing and laying in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for Reinforced Cement Concrete work in foundation like raft, grillage, strip foundation and footings of Reinforced Cement Concrete columns and steel stanchion etc. including bailing out water, formwork, cover blocks, compaction and curing roughening the surface if special finish is to be provided(Excluding steel reinforcement and Structural steel) complete, with fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.3 Page No.298 and B. 7, Page No.38(S.S.R.2020-21 Item.No.25.11 ) |
| 5 | Providing and casting in situ cement concrete M-20 of trap / granite/ quartzite / gneiss metal for R.C.C Columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, compacting and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement ) With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.5 Page No.300(S.S.R.2020-21 Item.No.25.31 ) |
| 6 | Providing and Casting in situ cement concrete of M 20trap / granite/ quartzite / gneiss metal for R.C.C. beams & lintel as per detailed designs and drawings or as directed including centering , formwork, cover blocks, compaction and roughening the surface if special finish is to be provided and curing complete. ( Excluding Reinforcement) With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.6 a Page No.300(S.S.R.2020-21 Item.No.25.50 ) |
| 7 | Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete.Spec.No. : Bd.G.I. Page No.313.(S.S.R.2020-21 Item.No.27.01 |
| 8 | Filling in plinth and floors with approved excavated materials in 15 cm to 20cm. layers including watering and compaction complete.Spec.No. : Bd.A.10 Page No.262(S.S.R.2020-21 Item.No.21.37 |
| 9 | Providing second class Burnt Brick masonry with conventional / Indian standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete.Spec.No. : Bd.G.5 Page No.315(S.S.R.2020-21 Item.No.27.05 ) |
| 10 | Providing and fixing steel frame doorof angle 40x40x5 mmwith 16mmdia.mild steelbarshorizontallyat10cmc/c for ventilator portionincludingiron holdfastforthe fixing shutters including welding, painting, finishing etc. complete.( S.S.R 2020-21 Item No 39.36 ) |
| 11 | Providing and fixing steel frameof angle40x40x5 mmsizefor windowswith 16mmdia.mild steelbars horizontally at 10cmc/c for ventilator portionand 15cmc/c for remaining portionwith M.S.flatof size 40x6mm vertical at center including iron hold fast boxes for fixing 40x6mm vertical at center including ironhold fast boxes forfixing shutters including welding finishing painting etc. complete. |
| 12 | Providing and fixing in position mild steel door and window shutter including mild steel angle frame of size 25x25x5 mm for fixing mild steel sheet 24 gauge including electrosatatic powder coating etc complete (S.S.R 2020-21Item No.__________) |
| 13 | Providing and casting in situ cement concrete M-20 of trap / granite/ quartzite / gneiss metal for R.C.C.Chajja as per detailed drawings and designsincludingcentering, formwork, cover blocks, compacting & roughening thesurfaceif special finish is to be provided and curing complete. (Excluding steel reinforcement) With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.9 Page No.303.(S.S.R.2020-21 Item.No.26.05 ) |
| 14 | Providing and casting in situ cement concrete M-20of rap / granite/ quartzite / gneiss metal for R.C.C.Slabs and landings canopy, waist slab as per detailed drawings and designsincludingcentering, formwork, cover blocks, compactiong and roughening the surface if special finish is to be provided and curing complete.(Excludingreinforcement ). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec.No. : Bd.F.8 Page No.302(S.S.R.2020-21 Item.No.25.70) |
| 15 | Providing and fixing In position TMT - FE - 500 bar reinforcement of varies diameters for R.C.C. pile caps, footing, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches etc. as per detailed desings, drawing and schedules including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required complete.Spec.No. : Bd.F.17 Page No.306.(S.S.R.2020-21 Item.No.26.33) |
| 16 | Providing internal cement plaster 6mm. thick in two coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete.Spec.No. : Bd.L.4 Page No.368(S.S.R.2020-21 Item.No.32.01) |
| 17 | Providing internal cement plaster 12mm. thick in two coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete.Spec.No. : Bd.L.4 Page No.368(S.S.R.2020-21 Item.No.32.03) |
| 18 | Providing PCC (1:2:4) for coping |
| 19 | Providing and fixing in position MS grill15 Kg/sqm |
| 20 | Providing sand faced plaster externally in cement mortar using approved screened sand in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete.Spec.No. : Bd.L.7 Page No.367.(S.S.R.2020-21 Item.No.32.11) |
| 21 | Providingfine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc complete |
| 22 | Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain / diamond pattern on a bed of 1:6 C.M including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning etc (S.S.R. 2020-21 Item No 33.03) |
| 23 | Providing and applying White - wash in two coats on old / new plasted surfaces or masonary surface asbestos cement sheets including including scaffoldingand preparing the surface by brushing and brooming down etc.Spec. No. : Bd.O.8 Page No.406(S.S.R.2020-21Item.No.36.03) |
| 24 | Providing and applying Washable Oil bond destemper of approvedcolour and shede to old/new surface in two coatsincluding scaffolding preparing the surface (excluding primer coat) complete.Spec.No. : Bd.P.6 Page No.414.(S.S.R.2020-21 Item.No.36.11) |
| 25 | Providing and applying two coats of water proof cement paint of approved matufacture and approved colour to the plasted surfaces including scaffolding if necessary, cleaning and preparing the surface watering for two days complete.Spec. No. : Bd.O.8 Page No.406(S.S.R.2020-21 Item.No.35.13) |
| 26 | Providing and applying twocoat of lead / zinc base oil paint / bituminious paint of approved colour to on old / new structural steel work and iron work in building including scaffolding if necessary, cleaning and preparing the surface etc complete (excluding primer coat ).Spec. No. : Abd.P.1 Page No. 411.(S.S.R.2020-21 Item.No. 35.04) |
| 27 | Rain Harvesting and Ground Development ProvidingandfixingP.V.C.Rainwaterpipesof110mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket withsolventcementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 28 | Providingsoakpitofsize 120cm x120cm x120cmincluding excavatingandfilling with brick-bats. |
| 29 | Providing and fixing heavy duty inter locking concreted coloured paving block of 60mm thickness of hevay strength of 300 kg/Sqcm ofapproved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleanning etc. Complete. |
| 30 | Drinking Water and Hand Wash Station 150 mm dia. Bore well drilling in 60meters. |
| 31 | PVC Casing pipe 180 mm dia. |
| 32 | 150 mm dia. Bore well yeild testing charge. |
| 33 | Geological Survey charges. |
| 34 | PVC Cap (Bell plug) |
| 35 | Providing, erectiong & giving test of single phase 1.00 H.P. Submersible pump set of 100 mm dia. with water proof winiding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. The pump should have shuitable discharge.( PWD Elect. wing CSR 2018-19 I.no. 12-2-55 p.no. 215 ) |
| 36 | Providing & fitting erecting automatic control panalfor 1 phase 230 volt A.C. Submersible / centifugal pump set up to 2.00 H.P. consisting of D.O.L. starter with erection etc.( PWD Elect. Wing CSR 2018-19 Item no. 12-4-20 p.no. 220) |
| 37 | Providing supplying 3 core 2.5 sq. mm Insulated PVC sheathed copper conductors flat submersible cable along with erection. (PWD Elect. wing CSR 2018-19 Page no. 219I. no. 12-4-8 ) |
| 38 | Providing & supplying, laying & giving hydralic test of following pipes :- A)32 mm dia ISI mark H.D.P.E. Pipes for Suction & DelIvery & Connection of tanks etc. complete. (PWD Elect. wing CSR 2018-19 I.no.16-5-16 P.no.173) |
| 39 | Providing, laying and fixing P.V.C. pipe of 25mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BDV 60 item no 42.23 |
| 40 | Providing & fixing H.D.P. container syntex or alike one piece moulded water tank made out of high density polythene of 1000 liters cap. Including loading, unloading, transportation, installation including all taxes etc. |
| 41 | Providing & Constructing two tap stand post as per type design with excavation 30 c.m. thick boulder filling 15 c.m. PCC in 1:2:4 bedding 20 c.m. thick PCC, 1:2:4 platform etc..(MJP CSR 2018-19I. no. 13 p.no. 58) |
| 42 | Providing & fitting different types of valves ISI marked including testing etc. 25 mm dia. Sluice valve(PWD CSR 2018-19 I.no. 16-6-13) |
| 43 | Providing & fitting PVC & G.I. Specials for connection & turnings. Etc. |
| 44 | Providing, erecting & taminating PVCarmoured cable 3 core 6.00sq.mm aluminium conductor service wire for connection etc. .(PWD CSR 2018-19I.no. 7-1-9) |
| 45 | Providing structural steel work for water tank as per detailed design and drawing or as directed by engineer in charge including cutting fabricating hoisting erecting and fixing in position making riveted bolted welded connections and one coat of anti corrosive paint and over it two coats of oil painting etc. complete |
| 46 | Electrification Supplying and erecting PVC truncking (PVC casing capping) of size 25 mm with accessories on wall / celling as per specification. |
| 47 | Supplying and erecting mains with 2 x 1.5 sq mm F.R copper PVC insulated wire laid in provided conduit / trunck / inside pole / bars or any other placesas per specification. |
| 48 | Supplying and erecting mains with 2 x 2.5 sq mm F.R copper PVC insulated wire laid in provided conduit / trunck / inside pole / bars or any other placesas per specification.WG-MA/BW |
| 49 | Supplying and erecting mains with 2 x 1.5 sq mm F.R copper PVC insulated wire laid in provided conduit / trunck / inside pole / bars or any other placesas per specification.WG-MA/BW |
| 50 | Supplying and erecting mains with 2 x 2.5 sq mm F.R copper PVC insulated wire laid in provided conduit / trunck / inside pole / bars or any other placesas per specification.WG-MA/BW |
| 51 | Supplying and ercting mains with ISI mark WP 2 x 6 sq.mm 1100 V.Grade aluminium PVC insulated and PVC sheathed wires on G.I bearer wire No. 8 SWG complete erected with required size of procelain reel insulators and 16 SWG G.I bundinf wire. |
| 52 | Supplyinganderecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. |
| 53 | Supplyinganderecting modular type switch 6A / 20A indicator ISI mark approved make duly erected on provided plate and box with wiring connections complete. |
| 54 | Supplyinganderecting modular type3 pin 6A multi socket with safety shutterISI mark approved make duly erected on provided plate and box with wiring connections complete. |
| 55 | Supplyinganderecting modular type3 pin 6A/16A multi socket with safety shutterISI mark approved make duly erected on provided plate and box with wiring connections complete. |
| 56 | Supplyinganderecting modular type electronic step regulator for two moduleISI mark approved make duly erected on provided plate and box with wiring connections complete. |
| 57 | Supplyinganderecting modular type blanking plateone moduleISI mark approved make duly erected on provided plate and box. |
| 58 | Supplyinganderecting PVC surfacemodular switch box with double mounting plate for 12 module duly erected in approved manner. |
| 59 | Wiring for modular plug on board with switch socket with copper wiring and earthing as per specification No.WG-PW/SW. |
| 60 | Point wiring in PVC truncking ( casing-caping) with 1.0 sq mm FR grade copper wire with modular type switch and requried accesseries as per specification No.WG-PW/SW. |
| 61 | Supplyinganderecting T 8 fluroscent tube triphosper / turband phosper 36 W. |
| 62 | Supplyinganderecting approved make 1 x 36/40W white stove enamelled / powder coated box fluo.fitting with 40 W VPIT copper ballast fixed at celling or on wallas per specification No.FG- IDF / BFF. |
| 63 | Supplyinganderecting approved makewhite stove enamelled / powder coated CRCA sheet not less than 0.7 mm thick chalk board type fluo.fitting 1 x T8 36/40 W electronic ballast having pf > 0.90 fixed at celling oron wallas per specification No.FG- IDF / CBF. |
| 64 | Supplyinganderecting street light wall bracket made from 40 mm dia B class G.I.pipe 1.2 m in total length complete as per specification FG-BKT/WB. |
| 65 | Supplying and erecting approved type LED street light fitting above 24 to 36W/having PF>0.95/ciass IP 65 or above.Housing of pressure die cast aiuminium alloy and heat sink extrutedaiuminium as per specification no.FG-ODF/FIS2. |
| 66 | Supplying and erecting fan hook of 10 mm M.S round bar groutedin RCC slab with making the site as original. |
| 67 | Supplying and erecting regular / standard model celling fan of 1200 mm sweep complete erected in position as per specification no.FG. |
| 68 | Supplying and erecting and marking SPMCB 6A to 32A,B-series (for lighting) in provided distribution boardas per specification no.SW-SWR/MCB. |
| 69 | Supplying and erecting and marking DPMCB 6A to 32A,B-series (for lighting) in provided distribution boardas per specification no.SW-SWR/MCB. |
| 70 | Supplying and erecting single pole and neutral distribution(SPNDB) with door surface /flush mounted with 2 ways for incoming and 8 ways for outgoing SP MCBs on iron frame / laminated boardas per specification no.SWR/MCBDB. |
| 71 | Providinf pipe type earthing with 10 mm G.I pipe or 20 mm dia. G.I Rod complete with all materials as per specification No. EA-EP. |
| 72 | Providing and Fixing Fire Extinshure Equipement to the School building of ISI standarss |
| 73 | Testing Charges |
| 74 | Royalty Charges |
| 75 | AddLabour Insr. 1% |
| 76 | Add G.S.T charges 18% |
AI Tender Summary
Tender Timeline
Jul 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender