}

Tender For Renovation Of Composite Vidyalaya At Sidhari In Azamgarh, Azamgarh-Uttar Pradesh

Azamgarh Development Authority has published Tender For Renovation Of Composite Vidyalaya At Sidhari In Azamgarh. Submission Date for this Tender is 24-07-2023. Building Work Tenders in Azamgarh Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

38686444
Tender For Renovation Of Composite Vidyalaya At Sidhari In Azamgarh
Open Tender
Indian
Uttar Pradesh
Azamgarh
24-07-2023

Tender Details

Tender For Renovation Of Composite Vidyalaya At Sidhari In Azamgarh

Key Value

Document Fees
INR 4130 /-
EMD
INR 67000.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: ???????? ??????????????, ?????? ?? ???????? ?? ??????
Sl. No. Item Description
1Dismantling cement concrete or brick or granolithic floors, including base concrete & including stacking 0 dismantled materials as directed. by the Engineer-in­Charge within a distance of 60 mt. (200 ft.)
2Dismantling existing plaster including disposal of refuse as directed by the Engineer-in charge within a distance\"of 60 metre (200 ft.)
3Racking out joints of brick work in cement or lime , mortar to a depth of 1 cm. (3/8\") including disposal of refuse\"as directed by the, Engineer-in-Charge within a distance of 60m. (200\")
4Excavatiopn in foundation in ordinary soil ( Loam clay ,sand ) includdding filling lift up to 1.5 m and lead up to 30 m & including filling ,watering and ramming of excavated earth into the trenches or into the space between the building and the side offoundation trenches or plinth and removal and disposal of surplus earth as directed by the Engineer - in - charge upto a distance of 30 m from the foundation trenches.
5Sand filling in plinth / required place including supply of necessary quantity of sand from a distance not exceeding 8 km from the site of work and including watering dressing etc .Rate to include cost of work and including watering dressing etc . Requried for proper compition of the work .
6Providing and laying in cement concrete 1:4:8 (1 cement: 4 c.sand ( FM 2.2 to 3.6) :8 gradedstone ballast 40mm. nominal size) and curing complete, including cost of formwork in foundation and floors.
7Class 150 brick work in 1:4 cement andcoarse sand ( FM 2.25) mortar in foundation and plinth including supply of all materials, labour and tools and plants etc, required for proper completion of the work.
820MM thick plaster in 1:2 with water proofing componding powder As per S.I. 597
9Mild steel or iron work in small size and section such as holding down botls , hold fast, tie rods , grating , grill /Staircase railing etc. ( when not included in an overall rates ) wrought to required shape as necessary for bending etc including supply of steel and its wastage i/c cost of bolts, nuts if required for and welding , grinding and making holes as required for proper completion of work. (S.I.No. 285 AR ) Same above item but for hold fast of door and windowsframes chaukhat.
10Same above Z sectionitem but door windows chaukhats
11Supply and fixing of flush door commercial quality conforming to IS 2202 Part I (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges ,bolts lock,handles,springs and other fittings but excluding their supply and including painting with two coat of black japan paint on all iron fittings if necessary .Fittings with necessary screw to be supplied departmentally (30 mm thick shutters) (SI NO 470 SOR GZP 2015) (a) Single leaf
12Fixing of steel or wooden chaukhats in position Door/windows/Ventilater
1312 mm thick plaster with cement mortar 1:4 consisting of 1 part cement and 6 part of approved coarse sand of Minimum thickness not to be less than 10 mm .Including supply of all materials , labour and T&P etc requried for proper complition of the work(SI NO 586 a)
14Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete (ii) Size of Tile 600x600 mm. (DSR 2014 ITEM 11.41.2)
15Supply and fixing 6mm (1/4\") china white glazed tiles in flooring or in skirting or dado laid with 1:3 white cement slurry ,jointing and polished complete including supply of all materials , labour and T&P etc ,requried of proper complition of the work. (SI NO 628 SOR GZP 2015)
16Painting two coat synthetic enamel paint over and including priming coat on new steel or other metal surface upto 10cm width or girth in small articles not exceeding 0.10 sqm area after and including preparationof surface by thoroughly cleaning oil,grease, dirt and other foreign matters and scored by wire brushes,fine steel woool rappers and preparing and knotting including cost of all materials,labours,T&P etc.required for proper completion of the work.(SI NO 641+642)
17Same as above item for new wooden surface.(SI NO 641+642)
18Finishing walls with snocem S.I 662
19Distempering with distemper of approved brand and manufacture to give an even shadeold work (two or more coats) over Si 651
20Providing & fixing with 4.0 mm thick glass panes with putty and glazing clips in steel doors, windows , clerestory windows, all complete for proper complition of the work as per direction of E/I
21Providing and fixing aluminium sliding door bolts of size 300x16 mm , ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete.
22Providing and fixing aluminium tower bolts of size 300x10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.complete.
23Providing and fixing aluminium handles of size 100 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete
24Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolour and shade, with necessary screws etc.complete.
25Cost cement concrete door sills chaukhets boundry posts shalves and similer work with cement approved coarse sand and 2 cm (3/4\") gauge approved stone ballast in the proportion of 1:2:4 excluding supply of reinforcement and its binding but including its fixing and binding the sane with 24 B.W. G.G.I. binding wire and including the cost of binding wire, moulds and all other materials labour and T&P etc. required for proper completion of the work
26Providing and laying Chequred floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
27Wall Painting with enamel paint for educational For children
28Construction of pre fabricated / precast material for new boundary wallGrade M-20
29Providing and Laying of Rubber moulded (Red colour interlocking Concrete Block Pavements having thickness 80 mm including levelling and dressing of surface to required level and slope spreading and moisting 30mm thick local sand on bend. filing joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504
30R.C.C. work with cement,approved coarse sand and 20mm gauge approved stone grit in proportion of 1:1.5:3 in Column excluding suuply of reinforcement and its bending but including it\"s fixing and binding with 24B.W.G.G.I binding wire and including necessary centring and shuttering etc. and also including supply of all materials ,labour t&prequired for proper completion of the work. Strength of the concrete shall not be less than M-20 as directed by E/I. (Up to Two Storey)
31R.C.C. work with cement,approved coarse sand and 20mm gauge approved stone grit in proportion of 1:1.5:3 in plinth / lighterBeam excluding suuply of reinforcement and its bending but including it\"s fixing and binding with 24B.W.G.G.I binding wire and including necessary centring and shuttering etc. and also including supply of all materials ,labour t&prequired for proper completion of the work. Strength of the concrete shall not be less than M-20 as directed by E/I. (Up to Two Storey)
32R.C.C. work with cement,approved coarse sand and 20mm gauge approved stone grit in proportion of 1:1.5:3 in havier Beam excluding suuply of reinforcement and its bending but including it\"s fixing and binding with 24B.W.G.G.I binding wire and including necessary centring and shuttering etc. and also including supply of all materials ,labour t&prequired for proper completion of the work. Strength of the concrete shall not be less than M-20 as directed by E/I. (Up to Two Storey)
33P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
34Mid steel or iron work in heavy sizes such as trusses, buit up gates, record racks. roof work gaies etc. wrought to requ red from, incuding di ling holes riveting or weld ng where necessary &theirfxing, required for proper completion of the work
35Electric Work: Wiring point for light in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed steel conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge.
36Wiring point forfan in 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable (drawn through existing concealed steel conduit) and 5 Amp.flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/ junction box with supply of all material, labour & T&P etc. required for proper completion of the work as directed at site by the Engineer in charge.
37Wiring point for plug in 1.5 sq. mm. PVC insulated single core aluminium conductor cable (drawn through existing concealed steel conduit) and 5 Amp. flush type switch & ceiling rose/angle/batten holder fixed with 3mm thick phenolic laminated backalite sheet with brass machine screws and cup washers mounted over existing M.S. switch board box/junction box with supply of all material, labour and T&P etc. required for proper completion of the work as directed at site by the Engineer in charge but for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq. mm. PVC insulated aluminium conductor cable.
38Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , 15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash.
39Wiring point for two ways light with 1.5 sq. mm. F.R. PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire , GP Box and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phanolic laminated backelite sheet etc., complete in all respect, as directed, including matching colour wash
40Add for light / fan points with modular type switch in place of piano type switch.
41Add for 2 way light point with modular switches in place of piano type switches.
42Add for plug point with modular switch & socket in place of piano type switch & socket.
43Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch.
44Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. Cat-AA
45Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with one no. 14 SWG copper earth continuity wire etc, complete in all respects including matching colour wash.
46Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect.
47Supply & Fixing surface/Flush mounting 4ways V TPN distribution board with additional Doorcomplete in all respect, as directed at site by Engineer in charge. (Legrand make) CAT-B
48S&F of 63 Amp. 4 pole MCB(10 KA) C Curve CAT A
49S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve
50Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
51Supply and burying earth electrode for lighting conductor of 900mm x 900mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineerin- charge complete in all respect.
52Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect.
53Supply and fixing of electronic fan dimmer, 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.
54Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts, nuts and washers etc., complete in all respect.
55Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.
56Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.FOR 70 sq. mm 3-1/2 core
57Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB\"s (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other rameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support witheteachable side covers and shall be suitable for extension on the sides. The MCCB\"s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.. Incoming100Amp MCCB -1 NoOutgoning 63 Amp. MCCB-2 Nos.
58Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.
59Supply of 1200 mm sweep Ceiling Fan Crompton Greaves make
60Supply of Exhuast FanHavals/ Crompton Greaves make 300 mmdia
61Water Supply & Sanatory: Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flushpipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.Same as above but for Eropion type W.C. pan with black plastic seat and lid Make, Cera, Hidustan
62Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern includingcutting & making good the walls wherever required. a)Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.
63Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. a) 32mm dia
64Providing & fixing soil, waste and vent pipes.a) 100mm dia centrifugally SWR pipe.
65Providing & fixing soil, waste and vent pipes.b)75mm dia centrifugally SWR pipe.
66Providing & fixing Upvc SWR Nhani trap of self cleansing design with or without ventarm complete, including cost of cutting & making good the walls & floors. 110mm inlet & 75mm outlet.
67Providing and fixing plain SWR bend.a) 110mm
68Providing and fixing plain SWR bend.b) 75mm
69Providing and fixing centrifugaly UPVC SWR single equal plain junction of required degree.a) 110x110x110mm
70Providing and fixing centrifugaly UPVC SWR single equal plain junction of required degree.b) 75x75x75mm
71Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter
72Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)a) 15mm dia nominal bore (medium duty)
73Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)b) 20mm dia nominal bore (medium duty)
74Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)c) 25mm dia nominal bore (medium duty)
75Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.(internal work)d) 32mm dia nominal bore (medium duty)
76Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.Exposed on walla) 20mm dia nominal bore (medium duty)
77Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.Exposed on wallb) 25mm dia nominal bore (medium duty)
78Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall.Exposed on wallc) 32mm dia nominal bore (medium duty)
79Providing & fixing cpvc long body bib cock of approved quality conforming to IS standards15mm nominal bore
80Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
81Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Circular Tank AS per required size of tank atsite
82Construction of brick masonary road gully chamber 455x610x45 cms. With bricks of class 150 designation.
83Supply and fixing of UPVC S.W.R. pipe type B confirming to IS 13592 includimg jointing the pipeswith rubber ring ,lubricant and UPVC SWR couplar confirming ti IS 14735. Also including excavation of trenches cutting iof walls and holes and repairing walls,floors anf refilling the trenches as before but excluding supply and cost of other fittings such as elbow,bend,tee and Y tee ncluding suplly of all material labour and T&P Required for proper completion of workPipes 160 MM DIA
84Supply and fixing of UPVC S.W.R. pipe type B confirming to IS 13592 includimg jointing the pipeswith rubber ring ,lubricant and UPVC SWR couplar confirming ti IS 14735. Also including excavation of trenches cutting iof walls and holes and repairing walls,floors anf refilling the trenches as before but excluding supply and cost of other fittings such as elbow,bend,tee and Y tee ncluding suplly of all material labour and T&P Required for proper completion of workPipes 110 MM DIA
85Providing and laying ceent concrete 1:5:10 (1cement 5 c sand 10 graded stone aggregate 40 mm) all round swr pipes including bed cocrete Pipes 160 MM DIA
86Providing and laying ceent concrete 1:5:10 (1cement 5 c sand 10 graded stone aggregate 40 mm) all round swr pipes including bed cocrete Pipes 110 MM DIA
87Construction of brick masonary road gully chamber 600x850x45 cms. With bricks of class 150 designation.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail