Tender For Provision Of Boundary Wall With Allied Works At Acquired Land At Af Station Ojhar. 1 Excavation And Earth Work 2 Surface Dressing Not Exceeding 15 Cm Deep In Soft / Loose Soil Complete All As Specified And As Directed. 3 Excavation In Trenches Not Exceeding 1.5 Metre Wide And Not Exceeding 1.5 Metre Depth In Depth For Foundation Etc. And Getting Out In Soft / Loose Soil Complete All As Specified And As Directed. 4 Excavation In Trenches Not Exceeding 1.5 Metre Wide And Not Exceeding 1.5 Metre Depth In Depth For Foundation Etc. Or And Getting Out In Hard / Dense Soil Complete All As Specified And As Directed. 5 Excavation In Trenches Not Exceeding 1.5 Metre Wide And Not Exceeding 1.5 Metre Depth In Depth For Foundation Etc. Or And Getting Out In Soft / Disintegrated Rock Complete All As Specified And As Directed. 6 Excavation In Trenches Not Exceeding 1.5 Metre Wide Andexceeding 1.5 Metre But Not Exceeding 3.0 Metre In Depth For Foundation Etc. And Getting Out In Soft / Loose Soil Complete All As Specified And As Directed. 7 Excavation Over Areas Not Exceeding 1.5 Metre Deep And Getting Out In Soft / Loose Soil Complete All As Specified And As Directed. 8 Excavation Over Areas Not Exceeding 1.5 Metre Deep And Getting Out In Soft / Disintegrated Rock Complete All As Specified And As Directed. 9 Excavation Over Areas Exceeding 1.5 Metre But Not Exceeding 3.0 Metre Deep And Getting Out In Soft / Disintegrated Rock Complete All As Specified And As Directed. 10 Returning Filling In Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exceeding 25Cm Thick In Soft / Loose Soil Complete All As Specified And As Directed. 11 Removing Excavated Material ( Soil ) Notexceeding 50 Metre And Depositing Where Directed At A Level Not Exceeding 1.5 Metre Above The Starting Point Complete All As Specified And As Directed. 12 Removing Excavated Material ( Soil ) Exceeding 500 Metre But Not Exceeding 1000 Metre And Depositing Where Directed At A Level Not Exceeding 1.5 Metre Above The Starting Point Complete All As Specified And As Directed. 13 Removing Excavated Material ( Soft / Disintegrated Rock ) Exceeding 250 Metre But Not Exceeding 500 Metre And Depositing Where Directed At A Level Not Exceeding 1.5 Metre Above The Starting Point Complete All As Specified And As Directed. 14 Material And Labour For Filling Fine Sand To The Full Width Of Trenches For Protection Of Cables Including Spreading And Punning Down Including Watering, Consolidation Complete All As Specified And As Directed.Note : Thickness Of Sand Filling Shall Be The Measured After Punning. 15 Concrete Work 16 Material And Labour For Plain Cement Concrete 1:3:6 Type C1 Using 20Mm Grade Stone Aggregate Including Weathering, Slightly Rounded Chamfered Angles And Throating Including Necessary Formwork For Coping Of Electric Poles Complete All As Specified And As Directed. 17 Material And Labour For Plain Cement Concrete 1:4:8 Type D2 Using 40Mm Grade Stone Aggregate As Foundation Filling And Mass Concrete Complete All As Specified And As Directed. 18 Material And Labour For Reinforced Cement Concrete M-25 ( Design Mix ) Using 20Mm Graded Stone Aggregate As In Footings Of Columns, Plinth Beams Etc. Complete All As Specified And As Directed. 19 Material And Labour For Reinforced Cement Concrete M-25 ( Design Mix ) Using 20Mm Graded Stone Aggregate As In Walls, Retaining Walls, Basement Walls, Ballast Walls And The Like; Etc. Complete All As Specified And As Directed. 20 Material And Labour For Reinforced Cement Concrete M-25 ( Design Mix ) Using 20Mm Graded Stone Aggregate As In Columns Etc. Complete All As Specified And As Directed. 21 Material And Labour For Reinforced Cement Concrete M-25 ( Design Mix ) Using 20Mm Graded Stone Aggregate As In Beams, Cantilevers, Bressummers, Lintels Over 1.5 Metre Span Etc. Complete All As Specified And As Directed. 22 Material And Labour For Plain Cement Concrete 1:2:4 Type B0 Using 12.5 Mm Graded Stone Aggregate As In Bed Block Including Forwork Complete All As Specified And As Directed. 23 Brick Work 24 Material And Labour For Brick Work With Fly Ash Bricks ( Old Size Bricks ) , Straight Or Curved On Plan Exceeding 6M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed. 25 Wood Work 26 Material And Labour For Use And Waste Of Form Work To Sides Of Column Footings, Column Bases, Rafts And Plinth Beams For Flat Rough Finished Surface Complete All As Specified And As Directed. 27 Material And Labour For Use And Waste Of Form Work To Falt Faces Of Walls, Retaining Walls, Abutments, Parapets And Staircase Railings And Similar Work Including Attached Pilasters, Buttresses Etc Vertical Or To Batter For Rough Finished Surface Complete All As Specified And As Directed. 28 Material And Labour For Use And Waste Of Form Work To Sides Of Columns For Flat Rough Finished Surface Complete All As Specified And As Directed. 29 Material And Labour For Use And Waste Of Form Work To Sides And Soffits Of Beams, Cantilevers, Bressumers, Lintels Over 1.5 M Span Etc. For Flat Rough Finished Surface Complete All As Specified And As Directed. 30 Steel, Aluminium And Iron Work 31 Material And Labour For Mild Steel Tmt Steel Bars 10Mm Dia And Over Cut To Length Bent To Shape Required Including Cranking, Bending And Binding With Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed. 32 Material And Labour For Mild Steel Tmt Steel Bars 5Mm Dia And Over As In Stirrups, Spacers And Binders Cut To Length, Bent To Shape Required Including Cranking, Bending And Binding With Mild Steel Wire ( Annealed ) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed. 33 Supply And Fixing Mild Steel Framed Work Such As Grills, Gratings, Etc. With Ends Of Bars Shouldered And / Or Riveted, Or Forged Into Spikes, Framed Guard Bars And Similar Work Conforming To Fe.290, Gde-E-265 Complete All As Specified And As Directed. 34 Supply And Fixing Galvanized 2 Strand Steel Barbed Wire 2.24 Mm Dia Barbed With 2 Mm Dia Barbs At 75 Mm Spacing And Straining And Fixing To Any Type Of Standard Rails, Straining Bolts Including Securing Or Tying At Crossings With And Provision Of Mild Steel Wire, Staples Or Steel Pins Etc. Complete All As Specified And As Directed. 35 Supply And Fixing Mild Steel Screw Bolts ( Machine Made ) With Hexagonal Or Square Heads At One End And Screwed The Other End Or Screwed Both Ends, Each Screwed End To Be Fitted With Washer And One Hexagonal Or Square Nut, Length Of Bolt Exceeding 22.5 Cm But Not Exceeding 30 Cm And Dia Of Neck 10 To 20 Mm Complete All As Specified And As Directed. 36 Supply And Fixing Mild Steel Plates ( Plain Or Chequerred ) , Channels Square Cut Or Notched ( Ordinary And Counter Sunk ) Forming Holes With Riveted, Bolted Or Welded Attachment Using Steel Of Grade Fe-410-W ( Grade E-250 ) Quality B Complete All As Specified And As Directed. 37 Supply And Fixing Mild Steel Posts And Struts As In Swan Neck Including Tops Bent To Shape As Directed Including All Necessry Drilling, Bolting, Welding, Riveting Etc. Conforming To Fe-290 ( Grade E-165 ) Complete All As Specified And As Directed. 38 Material And Labour For 4 Mm Dia Galvanized Steel Wire Mesh 150 Mm X 100 Mm, Made Up Into Mattresses Or Cages, Lapped, Wired And Laid In Position Including Closing After Filling Complete All As Specified And As Directed. 39 Supply And Fixing Fencing Over Boundary Wall With Punched Tape Concertina Coil ( Ptcc ) 1050 Mm Dia All As Specified And Shown On Drawings And Fixed With Seven Horizontal Rows Of Reinforced Barbed Tape ( Rbt ) As Specified Which Is To Be Fixed Between Angle 50 Mm X 50 Mm X 6 Mm At Every Interval Of 3 Metre Centre To Centre With Wire, Stud Tied With Gi Staple & Gi Clips Including All Necessary Bolts Etc. Complete All As Specified And As Directed.Note :- Cost Of All Items Mentioned Shall Be Deemed To Be Included In The Quoted Rate Of This Item Except 50 Mm X 50 Mm X 6 Mm Angle Iron Which Shall Be Measured And Paid Separately. 40 Plastering And Pointing Work 41 Material And Labour For Rendering 10Mm Thick In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 42 Material And Labour For Forming V Grooves In Plaster Not Exceeding 10 Mm Deep And Not Exceeding 10 Mm On Face Complete All As Specified And As Directed. 43 Material And Labour For Washed Stone Grit Plaster In Two Layers, Under Layer 12 Mm Thick Cement Plaster 1:4 ( 1 Cement : 4 Coarse Sand ) And Furrowing The Under Layer With Scratching Tool, Thereafter Applying Cement Slurry @ 2 Kg / Square Metre On Under Layer And Then Applying Final 15 Mm Layer Of Cement Grit Plaster 1:1.5:2 ( 1 Cement : 1.5 Coarse Sand : 2 Stone Chipping Of 10 Mm Nominal Size ) In Panels With Grooves All Round As Per Approved Pattern Including Scrubbing And Washing With Brushes And Water To Expose The Stone Chippings Complete All As Specified And As Directed. 44 White Washing, Colour Washing And Distemdering Work 45 Material And Labour For Applying Two Coats Of Cement Based Paint Over A Coat Of Alkali Resistant Priming Paint On Plastered Or Concrete Surfaces Of Walls Including Preparation Of Newly Plastered / Pointed Surfaces Complete All As Specified And As Directed. 46 Painting Work 47 Material And Labour For Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description Over 10Cm Width Or Grith, Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And As Directed. 48 Miscellaneous B / R Items 49 Material And Labour For Hdpe Pipes Pn-10, 100 Mm Dia Fixed In Rcc Wall Complete All As Specified And As Directed. 50 Material And Labour For 25 Mm Thick Pre-Formed Bituminous Filler ( Mastic Pad ) As In Expansion Joints Complete All As Specified And As Directed. 51 Supply And Fixing 150 Mm Bore Upvc Pipes Of Pressure Rating 10 Kg F / Sq Cm, Single Socketed In Any Length Fixed In Walls As In Weep Holes Complete All As Specified And As Directed. 52 Material And Labour For Cutting Road Pavement / Hard Standing By Manually And Making Good The Disturbed Surface To Match With The Existing Surface Complete All As Specified And As Directed. 53 Electrical Work 54 Supply And Fixing Factory Made Un Reinforced Precast Concrete Cable Cover Class Lv Type 1 Flat Of Size 250 Mm X 150 Mm X 40 Mm Complete All As Specified And As Directed. 55 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor Along The Wall Or Along The Pole Complete All As Specified And As Directed. 56 Supply And Laying Lt Cable Xlpe Insulated, Armoured, Heavy Duty With Stranded Aluminium Conductor, 1100 Volts Grade Of Cross Sectional Area 10 Sq Mm, 2 Core Complete All As Specified And As Directed. 57 Supply And Erecting Steel Tubular Swages Pole Complete With Cast Iron Base Plate, Finial Taper Plug, Nuts, Bolts, Screws, Pole Type 410 Sp-31 ( 9 Metre Long ) Complete All As Specified And As Directed. 58 Supply And Fixing Led Street Light Fitting 35 Watt, 230 V, Ac Outdoor Type With High Pressure Die Cast Aluminium Housing And Heat Resistant Glass Complete With Driver, Lamp, Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics With Ip 65 / 66 Protection Complete All As Specified And As Directed. 59 Supply And Fixing Single Piece Moulded Pvc Box Of Size 230 Mm X 185 Mm X 110 Mm Outer Dimension With And Including Provision Of One Mcb Sp 16 Amps & One 4 Way Connector Including All Necessary Fixing Arrangements To Fix To Pole I.E. Clamps, Nuts, Bolts & Washers Of Suitable Size Complete All As Specified And As Directed. 60 Supply And Fixing In Repairs Street Light Brackets With 40 Mm Dia Gi Tubing Light Grade, 1.2 Metres Length, Bent To Shape Required Including Fixing With Suitable Ms Clamps Made Out Of 40 Mm X 3 Mm, Nuts, Bolts, Washers Etc. And Fitted On Lt Poles / Walls Complete All As Specified And As Directed. 61 Material And Labour For Pvc 3 Core, 1.5 Sq Mm Flexible Copper Cable For Connection From Junction Box To Street Light Including Suitable Lugs, Pvc Conduit Etc. Required At Site Complete All As Specified And As Directed. 62 Material And Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode Of Size 600Mm X 600Mm X 6Mm Thick Buired Directly In Ground Vertically At A Depth Not Less 2.25 Mtr Below Normal Ground Level With Top Edge Of Earth Plate At A Depth Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Gi Wire 4 Mm Dia Through 15 Mm Bore Light Grade Gi Pipe By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel With Adequate Quantity Of Charcoal And Salt, Proper Watering Arrangements Including 20 Mm Bore Medium Grade Gi Tubing Including Funnel, Wire Mesh, Rcc Pit Cover And Pcc Chamber Pit With 1:2:4 Type C1, Including Excavation And Earth Work All As Shown In Electrical Plate No 3 Of Ssr Part-1 2009 Connected To Earthing Test Point Complete All As Specified And As Directed. Notes : ( I ) The End Point Connection Of Earthing Shall Be Carried Out With The Help Of Gi Bolt Grouted And Washer And Nut All As Directed. ( Ii ) 4 Mm Dia Gi Wire And Its Protection Pipe Upto And Including 7.5 Mtr Only From The Top Of Earth Electrode Shall Be Deemed To Be Included Under This Item And Additional Earth Wire & Protection Pipe Etc. If Any Required At Site Shall Bemeasured And Paid For Separately. 63 Demolition And Dismantling Work 64 Dismantling Posts Ot Struts ( Steel Or Rcc ) Any Section Including Taking Out Embedded Portion And Making Good Disturbed Ground, Posts Embedded In Cement Concrete Complete All As Specified And As Directed. 65 Dismantling Fencing Wire Mesh Of Any Type / Description Complete All As Specified And As Directed. 66 Dismantling Galvanized Barbed Wire Of Any Dia / Type Complete All As Specified And As Directed. 67 Dismantling Mild Steel Work Of Any Description Not Otherwise Provided For Complete All As Specified And As Directed.
