Tender For Construction /Upgradtion Of B.I Road Km 0 To 9Th (Macadamization Of Link Road Gound Thasgam Sankoo
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2023
0 days left
EMD
84680
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sankoo → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction /Upgradtion Of B.I Road Km 0 To 9Th (Macadamization Of Link Road Gound Thasgam Sankoo
BOQ
| Sl. No. | Item Description |
| 1 | Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters. |
| 2 | Preparation of sub gradeexcavating earth to an average .of 22.5cm depth dressing to camber and consolidation with road rollerincluding making the undulation etc.and disposal of surplus earth up to 50mtr. |
| 3 | Providing, laying , sub base/ base/surface course (200mm thick) with local materials (table 400.13) by mix in place method normal construction of granular sub base by providing with smooth wheel roller to achieve the desired density complete as per clause 401.4 as per technical specification clause 408 using gravel mix soil (including preparation of sub grade by way of removal of humps and filling opf ditches, loading unloading and carriage complete job) BSB sourse from Khumbathang. |
| 4 | Supply/filling of RBM including digging carrying by lorry ramming, watering, dressing and consolidation in layers including all lead, lift and carriage for average lead up to10km by Mechanical Transport etc Complete finishing work to be measured. |
| 5 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge |
| 6 | Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications.16.38.1 On W.B.M. @ 0.75 Kg/sqm. |
| 7 | Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom. On W.B.M. /W.M.M. @ 0.4 Kg/sqm. |
| 8 | Providing and laying bituminous macadamwith plant 50mm thick compacted thickness in accordance with most specification to specified lines grade and cross section aggregate grading to max size of 35% 20mm,45% 10mm,fine agg,20% with binder content of the mix 3.95% by weight to total mix include. all cost and carriage of material involved T&Plabour , octories Taxes and testing chargeduring execution include. cost of bitumen and consolidation power road roller include. 03% for surface correction /pot hole /undulation complete. Providing and laying bituminous macadamwith plant 50mm thick compacted thickness in accordance with most specification to specified lines grade and cross section aggregate grading to max size of 35% 20mm,45% 10mm,fine agg,20% with binder content of the mix 3.95% by weight to total mix include. all cost and carriage of material involved T&Plabour , octories Taxes and testing chargeduring execution include. cost of bitumen and consolidation power road roller include. 03% for surface correction /pot hole /undulation complete. |
| 9 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG- 30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix |
| 10 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cumof fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete |
| 11 | Providingand Laying Plum Concrete work of nominal mix concrete M-10 Grade {total mass of dry crushedaggregate 480kg (max includingplum) and water 34kg (max.)per 50kg of cement} nominal max size of stone aggregate 20mm, volumetric batching, using plums (size over 160mm, sprit crushed stone are quarry stone)@ 20% ofgross volume; up to plinth level ;including curingbut including cost ofform work and all carriage complete job. |
| 12 | Providing and laying of M.S. Pipe 300mm dia including excavation of trench and refilling of earth for cushion including cement concrete M10 grade inlet outlet ,loading unloadingand Carriage complete job. |
| 13 | Providing and laying of M.S. Pipe 200mm dia including excavation of trench and refilling of earth for cushion including cement concrete M10 grade inlet outlet ,loading unloadingand Carriage complete job. |
| 14 | Providing and laying of M.S. Pipe 150 mm dia including excavation of trench and refilling of earth for cushion including cement concrete M10 grade inlet outlet ,loading unloadingand Carriage complete job. |
AI Tender Summary
Tender Timeline
Jul 17, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender