Tender For Purchase Of Equipments For Micro Controller And Micro Processor Lab In Eee Department, palakkad-Kerala

Purchase Of Equipments For Micro Controller And Micro Processor Lab In Eee Department , Arduino Trainer Kit -Arduino Trainer Kit Within-Built Micro Controller With On Chip Bootloader, 16X2 Alphanumeric Lcd Interface, 4X4 Keypad Interface, Rs232 Uart, I2c Eeprom, I2c Rtc, Adc, Dac, Driver For Motors Relays, Motor Driver, 4 Digit Seven Segment Display Interface, 8 Leds For Logic Verification, Lm35 Temperature Sensor , Ir Photo Sensor, Pull Up / Pull Down Push To On Switches , Based Object Sensor, Buzzer Interface, 433 Mhz Rf Module With Encoder-Decoder , 8085 Microprocessor Training Kit:Based On 8085 Cpu Operating At 6.144 Mhz, 8K Bytes Of Powerful Monitor Program Using 27512 Eprom, 8K Bytes Of Ram Using 6264 With Battery Backup Using Nicd Battery, On-Board One Memory Expansion Up To 56Kb, Three Channel Timer / Counter Using 8253 Brought Out At 10 Pins Frc Connector, 48 I / O Lines Provided Through 8255 Brought Out At 26 Pins Frc Connector To Interface With Ic-Xx Series, Rs-232C Interface Through Sid / Sod Lines, Two Mode Of Commands: Ascii Key Pad Mode And Serial Mode, 20X2 Alphanumeric Lcd Display With Backlite, 101 Ascii Keyboard Interface Using 89C2051 Operating @ 12Mhz, Powerful Commands Like Examine / Edit Memory, Examine / Edit Register, Single Stepping, Execution, Block Move, Insert Data, Delete Data Can Be Used Through Ascii Keyboard Or Pc Serial Mode, On Board Single Line Assembler / Disassembler, Facility For Downloading / Uploading Files From / To Pc, All Address, Data & Control Lines Are Available On Kxt Bus 50 Pin Frc Connector To Interface With Sc-Xx Series, All Ics Are Mounted On Ic Sockets, Bare Board Tested Glass Epoxy Smobc Pcb Is Used, In-Built Power Supply Of +5V / 1.5A, ±12V / 250Ma, Attractive Plastic Enclosures, User’S Manual With Sample Programs. , 8051 Microcontroller Trainer Kit - 8051 / 89C52 Cpu Operating @ 11.0592 Mhz, 32K User Ram Using 62256 With Battery Backup Using Nicd Battery, 16K Bytes Of Powerful Monitor Eprom Using 27512, One Memory Socket Is Provided For Expansion Up To 64Kb, 48 I / O Lines Using 2 Nos. Of 8255 Brought At 26 Pins Frc Connector To Interface With Ic-Xx Series, Three Channel Timer / Counter Using 8253 Brought Out At 10 Pins Frc Connector, 20X2 Alphanumeric Lcd Display With Backlite, 101 Ascii Keyboard Interface Using 89C2051 Operating @ 12Mhz, Two External Interrupts Int0 & Int1 Are Available At 40 Pin Frc Connector, Rs-232C Using Rx / Tx Of 8051 Terminated On 9 Pins D-Type Connector, Onboard Single Line Assembler / Disassembler, Two Modes Of Operation: Ascii Keyboard Mode And Serial Mode, Powerful Commands Like Examine / Edit Memory, Examine / Edit Register, Single Stepping, Execution, Break Point Can Be Used Through Ascii Keyboard Or Pc Serial Mode, Facility For Downloading / Uploading Files From / To Pc, All Address, Data, Control & Port Lines Are Available On 40 Pins & 10 Pins Frc Connector, All Ics Are Mounted On Ic Sockets, Bare Board Tested Glass Epoxy Smobc Pcb Is Used, In-Built Power Supply Of +5V / 1.5A, ±12V / 250Ma, Attractive Plastic Enclosures, User’S Manual With Sample Programs. , Dc Motor Controller Card With Motor-Dac-0800 Is Used For Digital To Analog Conversion, 8 Bit Accuracy Dac Chip, Spdt Relay Is Provided For Direction Control, Clock Wise & Anti Clock Wise Rotation Can Be Controlled, Speed Can Be Controlled By This Controller, 9 Volt Dc Motor Is Supplied With This Card, 9 Volt Ac Adaptor Is Supplied With This Card, Connect To 8255 Using 26 Pin Frc Connector, Users Manual With Sample Programs.

INR 1416 /-

INR 5617.0 /-

Refer document

Name of Work: PURCHASE OF EQUIPMENTS FOR MICRO PROCESSOR AND MICRO CONTROLLERLAB IN ELECTRICAL & ELECTRONICS ENGINEERING DEPARTMENT

Sl. No.	Item Description
1	Arduino Trainer Kit -Arduino trainer kit within-built micro controller with on chip bootloader,16x2 alphanumeric LCD Interface,4x4 keypad interface,RS232 UART, I2C EEPROM, I2C RTC, ADC, DAC, Driver for Motors Relays, Motor Driver,4 digit Seven Segment Display interface,8 LEDs for logic verification, LM35 Temperature Sensor , IR Photo Sensor, Pull Up/Pull Down Push to On Switches , Based Object Sensor, Buzzer Interface, 433 MHz RF Module with Encoder-Decoder
2	8085 MICROPROCESSOR TRAINING KIT:Based on 8085 CPU operating at 6.144 MHz, 8K bytes of Powerful Monitor Program using 27512 EPROM, 8K bytes of RAM using 6264 with Battery Backup using NICD Battery, On-board one memory expansion up to 56KB, Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector, 48 I/O lines provided through 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series, RS-232C interface through SID/SOD lines, Two mode of commands: ASCII Key pad Mode and Serial Mode, 20x2 Alphanumeric LCD Display with Backlite, 101 ASCII Keyboard interface using 89C2051 operating @ 12MHz, Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through ASCII keyboard or PC serial mode, On board Single Line Assembler / Disassembler, Facility for Downloading/Uploading files from/to PC, All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series, All ICS are mounted on IC Sockets, Bare board Tested Glass Epoxy SMOBC PCB is used, In-Built Power Supply of +5V/1.5A, ±12V/250mA, Attractive Plastic Enclosures, User’s Manual with sample programs.
3	8051 Microcontroller Trainer kit - 8051/89C52 CPU operating @ 11.0592 MHz, 32K user RAM using 62256 with Battery Backup using NICD Battery, 16K bytes of powerful monitor EPROM using 27512, One memory socket is provided for expansion up to 64kB, 48 I/O lines using 2 Nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series, Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector, 20x2 Alphanumeric LCD Display with Backlite, 101 ASCII Keyboard interface using 89C2051 operating @ 12MHz, Two External interrupts INT0 & INT1 are available at 40 pin FRC connector, RS-232C using RX/TX of 8051 terminated on 9 Pins D-Type Connector, Onboard Single Line Assembler / Disassembler, Two modes of operation: ASCII Keyboard Mode and Serial Mode, Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Break Point can be used through ASCII keyboard or PC serial mode, Facility for Downloading/Uploading files from/to PC, All Address, Data, Control & Port lines are available on 40 Pins & 10 Pins FRC Connector, All ICS are mounted on IC Sockets, Bare board Tested Glass Epoxy SMOBC PCB is used, In-Built Power Supply of +5V/1.5A, ±12V/250mA, Attractive Plastic Enclosures, User’s Manual with sample programs.
4	DC Motor Controller Card with Motor-DAC-0800 is used for Digital to Analog Conversion, 8 bit accuracy DAC chip, SPDT Relay is provided for direction control, Clock Wise & Anti Clock wise rotation can be controlled, Speed can be controlled by this controller, 9 Volt DC Motor is supplied with this card, 9 Volt AC Adaptor is supplied with this card, Connect to 8255 using 26 pin FRC Connector, User"s Manual with Sample Programs.