Military Engineer Services-MES has published Tender For Repairs / Replacement Of Floor, Plaster, Sunken Floor For Toilet Bathroom Kitchen, Plumbing, Glass Panes, Cup Boards Shutter Shelves, Aluminium Joinery, Rolling Shutter And Misc Repair In Zone Iii Under Age B/R-Ii At Ge (West) Bareilly.. Submission Date for this Tender is 03-08-2023. Civil Work Tenders in bareilly Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Jul-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-08-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / bouldermasonry includingall quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed. |
| 2 | M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 3 | M & L for Providing water proofing treatment to RCC sunken slab as per following specifications complete all as specified and directed:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200 ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating (Make: Dr. Fixit of pidilite or equivalent) @ 1.2 Kg per sqm for both coats with roller application.(Note: Each coat of elastomaric acrylic compound requires 6- 8 hours to dry up itself second coat shall be applied on getting the first coat completely dried up). |
| 4 | Demolition of cement concrete (un-reinforced) in ground floor and paving including terrazzo, tile etc. not exc. 15 cm thick (Below or above ground level) complete all as specified and directed. |
| 5 | Supply only liquid waterproofing compound all as specified. Make : Dr. Fixit or equviliant. |
| 6 | M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 7 | M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling, Terrazzo including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 9 | M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed. |
| 10 | M & L for glazed ceramic coloured tiles 450 mm X 300 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed. |
| 11 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed. |
| 12 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed. |
| 13 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed. |
| 14 | M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile with and including screeding 15mm thick in CM 1:6 complete all as specified and directed. |
| 15 | M & L for vitrified ceramic light shade coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick cement plaster / screed bed on fair faces of brick work or concrete surfaces in cement mortar 1:4 on vertical surfaces of wall finished even and rough suitable for laying wall tiles complete all as specified and directed. |
| 16 | M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 75 mm wide and 3 mm thick glass dividing strip inserted in positionat every one meter and change of direction complete all as specified and directed. |
| 17 | M & L for rubber moulded coloured chequered cement concrete tiles22 mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed 20 mm thick in Cement Mortar 1:6 complete all as specified and directed. |
| 18 | M & L for rubber moulded 60 mm thick, M-35 grade machine pressed pre-cast concrete interlocking paver block confirming to IS 15658-2006 with grey cement and pigment in any shape and size, laid dry over and including 25 mm thick sand cushioning, filling of joints with sand complete all as specified and directed. |
| 19 | M & L for providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm thick graded stone aggregate) as in floor and finishing top surface even and smooth with using extra cement complete all as specified and directed. |
| 20 | S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including dismantling of old unserviceable one complete all as specified and directed. |
| 21 | S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 22 | S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including dismantling of old unserviceable one complete all as specified and directed. |
| 23 | S & F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 24 | S & F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of triple layer constructions, white in colour and hoisted, fixed in position with and including dismantling of existing water tank any capacity complete all as specified and directed. Make- Sintex pure, Vectus smart and Supreme white. |
| 25 | S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of triple layer constructions, white in colour and hoisted, fixed in position with and including dismantling of existing water tank any capacity complete all as specified and directed. Make- Sintex pure, Vectus smart and Supreme white. |
| 26 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed. |
| 27 | S & F of 16-18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 28 | M & L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 29 | M & L for grinding and polishing to old terrazzo flooring/ skirting/kota stone flooring complete all as specified and directed. |
| 30 | S & F in repairs 140 mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 31 | S & F in repairs door seal of aluminium powder coated with cotton mat of length 90 cm to 100 cm complete all as specified and directed. |
| 32 | S & F in repairs 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed. |
| 33 | S & Fin repairs 20 mm dia Mild Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories complete all as specified and directed. |
| 34 | S & Fin repairs 20 mm dia Stainless Steel fancy type drapery curtain rod with brackets and lattu & other connected accessories complete all as specified and directed. |
| 35 | M & L for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth without using extra cement including taking down existing defective plaster complete all as specified and directed. |
| 37 | M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 38 | M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 duly mixed with water proofing compound finished even and fair with and including taking down existing defective cement plaster and applying two coats of cement base paint after preparation of newly plastered surface complete all as specified and directed. |
| 39 | M & L for rendering 5 mm thick cement plaster on cement concrete surfaces of ceiling and chajja with cement mortar 1:4 finished even and fair with and including taking down existing defective cement plaster and applying three coats of white wash after preparation of newly plastered surface complete all as specified and directed. |
| 40 | M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 41 | M & L for preparation of old decorated surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 42 | M & L for preparation of old decorated surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed. |
| 43 | M & L for preparation of old decorated surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 44 | M & L for preparation of old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 45 | M & L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 46 | M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 47 | Complete removal of existing treatment from wall/ ceiling surfaces and rubbing down with sand paper to obtain even and smooth surfaces complete all as specified and directed. |
| 48 | M&L for applying a thin layer (Average 1.00 mm thick) of wall care putty on wall/ceiling surfaces including rubbing down the surfaces with sand paper after getting dried to obtain a smooth & even surface complete all as specified and directed. |
| 49 | S & F in repairs factory made PVC Cupboard frame of the size 75mm x 40mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per manufacturer"s specification and drawing and all as specified and directed. |
| 50 | S & F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive) complete as per manufacturer"s specification and drawing and all as specified and directed. |
| 51 | S & F ofPVC board 19/20 mm thick any colour/ prelaminatedas in cabinets including shelves and shutters, fixed with screws and adhessive as per manufacturer"s instructions including piano hinges, magnet catcher, handles etc. complete all as specified and directed. |
| 52 | M & L for 4 mm thick E board classic (everest /equivalent) tiles for insulation and accoustic purpose 60X60 cm with and including powder coated galvanised iron snap grid with 32X25X1.5 mm thick tee section and 32X25X1.5 mm thick angle section with all hanging /sopporting arragements as in false ceilling including taking down old ceiling with frame and making good disturbed surface complete all as specified and directed . |
| 53 | S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 54 | Hacking out old broken glass (any thickness, size, qualityor description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing new glazing pins / spring clips complete allas specified and directed. |
| 55 | S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed. |
| 56 | S & F in repairs 150 mm helical door spring complete all as specified and directed. |
| 57 | S & F in repairs cast iron body door closer hydraulically regulated designation No. 3, universal type suitable for door shutter851 to 1000 mm in width and 61 to 80 Kg in weight complete all as specified and directed. |
| 58 | M & L for preparation of old painted wooden surfaces exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 59 | S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed. |
| 60 | S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors including taking up or down old unserviecable one complete all as specified and directed. |
| 61 | S & F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed |
| 62 | S & F in repairs water closet vitreous china squatting pan ‘Orissa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed. |
| 63 | S & F in repair plastic seat cover suitable for water closet pedestal pan, white coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices complete all as specified and directed. |
| 64 | S & F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed. |
| 65 | S & F in repairs Vitreous china wash basin white flat back 550mm x 400mm excluding tap, waste, chain & plug but including brackets complete all as specified and directed. |
| 66 | S & F in repairswaste fitting/coupling 32/40 mm dia brass chromium plated for glazed ware sinks/basins etc with long screwed shanks and fly nuts flange and bedded in red lead cement and other end fixed complete all as specified and directed. |
| 67 | S & F in repairsPVC waste pipe 25 mm dia 750 to 800mm long fixed to waste fitting of wash basinincluding socket suitable for waste fitting complete all as specified & directed. |
| 68 | S & F in repairs centre hole basin mixture 15 mm dia chromium platedcomplete all as specified and directed. |
| 69 | S & F in repairs 15 mm bore fancy type, chromium plated stop valve/angle valve/ two way angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 70 | S & F in repairs 15 mm bore bib tap, chromium plated fancy type, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 71 | S & F in repairs 100 mm size brass chromium plated shower rose with or with out swivel joint including shower arm 195 mm long with bend of 45 degree and flange, fixing to steel pipe or union complete all as specified and directed. |
| 72 | S & F in repairs chromium plated wall mixture withconnectionfor shower arragement complete all as specified and directed. |
| 73 | S & F in repairs water jet for EWC chromium plated with PVC connection pipe complete all as specified and directed. |
| 74 | S & F of chromiumm plated heavy duty extension piece 15 mm bore and 25 mm long complete all as specified and directed. |
| 75 | S & F in repairs Chromium plated hand shower (health faucet) alongwith 1 metre longPVC tube and wall hook suitable for EWC complete all as specified and directed. |
| 76 | S & F of 600 mm long in repairs PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed. |
| 77 | S & F of 600 mm X 450 mm X 5.5 mm thickbeveled edge looking mirror of selected quality glass mounted on 6 mm thick AC Building board or commercial plywood with and including aluminium edging alround of mirror and fixed to wall with PVC rawl plugs with chromium plated brass screw complete all as specified and directed. |
| 78 | S & F in repairsPVCtoilet cabinet with mirror of size 20"X16" of selecred quality complete as specified and directed . |
| 79 | S & F in repairs grating doom 100mm dia of CP with or withous holes (minimum weight 50gms) complete all as specified and directed. |
| 80 | S & F of 1 mm thick stainless steel sink with drainage board Kitchen or laboratory type with plug washer and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of sink 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm complete all as specified and directed. |
| 81 | S & F in repairs plate rack made out of1 mm thick stainless steel sheet of size 75 cm x 90 cm x 25 cm with all internal fittings (as per sample) complete all as specified and directed |
| 82 | S & F in repair of PVC corner set of three of size (12"X12" ,9"X9" and6" X6" ) with railling and complete all as specified and directed. |
| 83 | S & F in repairs Chromium plated toilet paper stand as per sample kept with Engineer- in-charge complete all as specified and directed. |
| 84 | S & F in repairs Chromium plated towel ring sample kept with Engineer- in-charge complete all as specified and directed. |
| 85 | S & F in repairs glass shelf with chromium plated brackets of suitable sizesample kept with Engineer- in-charge complete all as specified and directed. |
| 86 | Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 87 | Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 88 | Taking down door or window shutter of any description exc. 1.00 Sqm but not exc. 2.00 Sqm each complete all as specified and directed. |
| 89 | S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick single side prelam PVC sheet and edges will be painted to match with prelam sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed. |
| 90 | S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both sides prelam PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelam PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of both sides prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable side feathered edge beading and joined together with solvent cement as per specification and drawinggiven on MES schedule Part – II (2020) complete all as specified and directed. |
| 91 | M & L for 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 92 | S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed. |
| 93 | S & F of 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both faces complete all as specified and directed. |
| 94 | S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed. |
| 95 | S & F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002. Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit(II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill shall be measured and paid seperatly under relevant item of schedule |
| 96 | S & F of 100 mm long stainless steel butt hinges, medium weight complete all as specified and directed. |
| 97 | S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 98 | S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed. |
| 99 | S & F of 125 mm size mild steel hasp and staple wire type, stove enamelled lackincluding bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 100 | S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 101 | M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 102 | M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 103 | Taking down hood covers ofrolling shutters of areanot exceeding 6 sqm loose brackets plates or guide properly greasing helical spring,shafts, and guide, channel for proper functioning of rolling shutter of anysize and refixing covers in position after repairs complete all as specified and directed. |
| 104 | S & F in repairs 15 mm size bib tap standard of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed. |
| 105 | S & F in repairs 15 mm size pillar tap of PTMT, any colour high pressure screwed for iron pipes (minimum weight 110 gram) complete all as specified and directed. |
| 106 | S & F in repairs 15 mm size stop valve/angle valve of PTMT, any colour high pressure screwed for iron pipes (minimum weight 90 gram) complete all as specified and directed. |
| 107 | S & F in repairs Vitreous china wash down water closet single piece (Cascade pattern) with seamless flushing cistern square design duroplast slim seat cover, slow falling seat cover size 69x37x73CM / 66x35x71complete, including connection to drain pipe etc complete all as specified and directed. Make:- Hindware Cat part No.- 92573, CERA CITRUS Cat No S1013124/CORIUM Cat No S1013216. |
| 108 | S & F in repairs Vitreous China table/counter top wash basin of suitable sizeincluding SSbottle trap, and cabinet of PVC shutter fixing on counter with SS waste coupling, cp mixer for hot & cold (Make Jaguar, cera Cat No F2002152), waste pipecomplete all as specified and as directed. Model : Cat No 91072 Orchid of Hindware , Parryware Cat No C0483, CeraCat No Chauvin S2020166. |
| 109 | S & F in repairs brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. Model : Cat No FUS-29281 Fusion of Jaquar ,model of Hindware Cat No F390022, Parryware Cat No G0217A1, Cera Cat No F1012403. |
| 110 | S & F Brass CP Hand Shower with 15mm dia 1.2 Meter long flexible tube and wall hookscrewecd for iron pipe fancy type long body complete all as specified and directed. Model No :- HSH-1931 of Jaquar , Hindware Model No F160053, Parryware Model No T9982A1, Cera Cat No F7030102AB) |
| 111 | Dismantling of corrugated or semi corrugated asbestos cement sheets in roof covering complete all as specified and directed. |
| 112 | S & F of 6 mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘L’ type or ‘J’ type or cranked hook bolts and washers as in roof covering, walls etc. complete all as specified and directed. |
| 113 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 114 | S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 115 | S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. confirming to Fe-410-W (Grade E-250) Quality "B", drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and also fastening complete all as specified and directed. |
| 116 | S & F in repair aluminium powerded coated (minum 50 micron) anodised partition wall with aluminium frame of size : a) Single Groove Section: 82.50 x 38 x 1.20 mm thick b) Double Groove section: 82.50 x 38 x 1.10 mm thick duly fitted with neosprene rubber beading,frostedglass panes 4.8 mm nominal thickness or 12mm thick prelaminated melamine faced both sides decorative, exterior grade type II particle board panels including securing with "U" channels at top joining partatio complete all as specified. |
| 117 | S & F in repairs wall panelling of plastic vinyl composite of size 3050 x 254 x 8 mm thick with wooden/plane surface waterproof , termite proof, chemical resistant of light weight fixed with wooden screw with rawl wall plug complete all as specified and directed. |
| 118 | S & F in repairs wooden flooring (make signature) size 1215 x 195 mm and thickness 8.3 mm direct pressure laminated according to EN 13329 for gluelessinstallation heavy domestic and light commercial use EN 13329 lavel of use 22 including under layer of 2 mm EP and polythene layer complete all as specified and directed. |
| 119 | Notes:- (a)Materials not included in sch of credit and debris from the dismantling having lowest value/Nil value shall be the property of department. The same shall be removed/ disposed ordeposited by the contractor in MES stores yard of GE (West) Bareilly as directed for which no additional payment shall be made. The contracotor shall be fully responsible to safe guard these materials against losses/theft/deterioration etc till the same are deposited by him in MES Store yard (b) The contractor or his authorized representative shall attend office of AGE B/R for collection of complaints raised by user on regular basis and same has to be rectified /completed on requirement basis. If the contractors unable to rectify the complaints within stipulated time of7 days (maximum), the penalty will be imposed to the contractor at the rate of Rs 500.00 per day for each complaint. (c) The above aspects shall be borne in mind by the tenderer while quoting the rates. The rates quoted by the tenderer shall be deemed to include the above aspects. (d) Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
