Tamil Nadu Cooperative Sugar Federation Limited has published Tender For The Construction Of Rcc Framed Structure With Asbestos Cement Sheet Roof Building In The Bio Compost Yard. Submission Date for this Tender is 27-07-2023. Structural Work Tenders in salem Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF RCC FRAMED STRUCTURE WITH ASBESTOS CEMENT SHEET ROOF BUILDING IN THE BIO COMPOST YARD. |
| 2 | Clearing Light Jungle and cleaning of site. |
| 3 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification asper SS20B |
| 4 | Supply and filling of good M-sand filling approved quarry including cost andConveyance of all materials to site and all labor charges for filling etc., Complete. |
| 5 | Plain Cement Concrete 1:5:10 Mix (one part cement, five part sand and ten part of aggrigate) using40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as perstandard specifications as directed by Engineer incharge. |
| 6 | R.C.C Reinforced Cement Concrete 1:2:4 Mix (One part cement, two part sand and four part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications.TNDSS. |
| 7 | R.T.S Rod Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specifications. |
| 8 | Centering Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS.- |
| 9 | Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best II Class Bricks of size8 3/4 ” x 4 1/4 “x 2 1/4 ”from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 10 | Plastering in Cement Mortor 1:3 Mix (one cement, three sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. |
| 11 | Colourwashing Two coats with good quality of Colour pigments including cost of all materials to site and all other labour charges for mixing, applying and proper curring etc., Complete as per Standard Specifications |
| 12 | Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheets of fully corrugated by drilling holes (and not by punching) with necessary ‘J’/’U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed. |
| 13 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates, hallow sections and round bars etc. conforming to IS specification including one coat of metal primer coatingas per Design given by the departmental officers etc,complete as per standard specification |
| 14 | Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18GI sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers transportation charges etc., with gear |
| 15 | Total Amount |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
