Tender For Construction Of Court Building For Jmfc At Bheden In The District Bargarh For The Year 2022-23., Bheden-Odisha

TDR : 38653949

Tender Notice
BOQ

Expired

Bheden , Odisha

Tender Brief : Tender For Construction Of Court Building For Jmfc At Bheden In The District Bargarh For The Year 2022-23.

Document Fees
₹ 10000 /-

EMD
₹ 410900.0 /-

Tender Value
₹ 4.10 Crore /-

Submission Date
28-07-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	CIVIL WORKEarth Workinexavationoffoundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor\"s profit and over head charges, etc. complete in all respectfor the work as directed by the Engineer-in-charge.
2	Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment.complete in all respect
3	Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect and as per direction of Engineer-in-Charge.
4	Cement Concrete (1:3:6) using 4cmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete.
5	Cement Concrete (1:2:4) using 12mmsize hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C.
6	RCC work of M-20 grade in the following Structural building works using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
7	RCC work of M-20 grade concrete in Column Base Footing
8	RCC work of M-20 grade concrete in Column Super Structure
9	Ground Floor
10	First Floor
11	RCC work of M-20 grade concrete in Plinth Band
12	RCC work of M-20 grade concrete in Lintel Band
13	RCC work of M-20 grade concrete in Floor Beam
14	Ground Floor
15	First Floor
16	RCC work of M-20 grade concrete in Chajja
17	Ground Floor
18	First Floor
19	RCC work of M-20 grade concrete in Stair case
20	RCC work of M-20 grade concrete in Roof Slab
21	Ground Floor
22	First Floor
23	Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
24	Ground Floor
25	First Floor
26	Fly ashbrick masonry in cement mortar (1:6) in Superstructure using bricks of “25cm x 12cm x 8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
27	in Foundation and Plinth
28	in Super Structure
29	First Floor
30	At Outer side 12 mm (1/2\") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
31	Ground Floor
32	First Floor
33	In Inner Side 16 mmthick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
34	Ground Floor
35	First Floor
36	6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-Charge.
37	Ground Floor
38	First Floor
39	Supplying, fitting and fixing Industrial Vitrified tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C.
40	Supplying, fitting and fixing Chequre tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C.
41	Fixing tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
42	Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete.
43	Ground Floor
44	First Floor
45	Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.
46	Ground Floor
47	First Floor
48	Supplying, fitting, fixing of all types of MS Grills / Gates / MS Door made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
49	Labour charges for fitting, fixing M.S. gates (M.S. Door, Window with grills, Grills, collapsible gates) as per approved design including cost of all labour, T&P etc. complete.
50	Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
51	Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) (FENESTAI Three Track - Three Panel sliding window- 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 25 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners. silicon rubber sealant. easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14 EN-477-95 and other applicable codes and standards .As per specification approved by the Department & as per derection of the E.I.C . SE No 16100 dt 05/05/2020 .
52	Supplying fitting & fixing of 30mm thick flush door shutters with flush door block board \"A\" premium 32mm thick both side teak (Green ply / Allwin) both side laminated with 4 mm thick veener board (Teak Heritage) (Archid ply/ Green ply ) by using adhesives, with all labour, iron fitting & wooden hinged cleats etc. fitted & fixed complete in all respect, including cost of iron fitting , alluminum fittings, all labours, T&P etc. as per specification approved by the Department & as per direction of the E.I.C.
53	Proving fitting fixing of Armstrong accoustical fine fissured RH-99 board NRC 0.55 sound attention 34db suspended ceilling with Armstrong fine fissured tiles.
54	Painting Two coat with any approved S/E paint over a coat of primer towood / iron works including sand papering, polishing the surface including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
55	Ground Floor
56	First floor
57	25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge. complete.
58	Ground Floor
59	First floor
60	Cement washing one coatsincluding curing cost of all labours and cost of all materials etc complete as per the direction of Engineer - in - charge.
61	Finishing wall with water proof cement paints on new work two coats of any approved shade including all charges.Data for 10 Sqm.
62	E.I WORKRecessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having FRLSHont bakelitecover of suitable size, MSbox with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in Charge(Make of wire-Finolex/L&T/Havells/V-Guard/RR Cable/Polycab)Group-A
63	Group-B
64	Group-C
65	Pointwiring for 5A /6Amp socket outlet on existing board (Piano type/cover including connection etc. as required) with 2 X 1.5sq.mm FRLSH PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FRLSH PVC insulated single core multistrand copper conductor forloop earthing etc. as required(Make of wire-Finolex/L&T/Havells/V-Guard/RR Cable/Polycab)
66	Supply and fixing ofmetal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSH including providing and fixing of 6pin 5/6 & 15/16Amp socket outlet and15/16Amp piano type switches connection painting etc. as required. (make-Anchor/ Cona/HPL)
67	Supplying and fixing including testing and commissioning of 6A Piano socket outlet with 6 Amp switch including providing GI box with face plate etc as required.(Make of switch & socket: Legrand(Arteor)/ Panasonic(Vision)/ Schneider(Zencelo)2 No 6 Amp 3-pin socket with 2 No 6 Amp switch.
68	Recessed wiring to submain in the following sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FRLSH PVC insulatedsingle core multistrand copper conductoras earth wire as required. (Make of wire-Finolex/L&T/Havells/V-Guard/RR Cable/Polycab)2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia
69	2 X 2.5 sq.mm +1 X 1.5 sq.mm-do-
70	2 X 4 sq.mm +1 X 1.5 sq.mm -do-(for power plug)
71	2 X 6 sq.mm +1 X 1.5 sq.mm -do-(for Floor DB)
72	4 X 10 sq.mm + 2 X 4 sq.mm -do-(for AC Power DB)
73	Supply & Laying of 1.5 mm2 for inverter wiring
74	S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
75	S/F of 10W LED Bulb including all connections and accessories.Make-Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge
76	S/F of tube light20 watt led with 2000lumen fitting with cover (Make-Havells/ Philips/Cromptonas per the direction of side engineer in charge.
77	Supply & Installation of Square type Surface/Recess 15W LEDLight fitting (1500 Lumen or above) ofMake-Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge
78	S/F. of Ceiling fans 1400mm including all connections and accessories of Usha striker/Havells Pacer/Orient Summer Pride/Equivalent make.
79	Supply and fixing of Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)
80	S/F of 300mm high speed exhaust fan with MS jally on outer side of wall (bajaj/hahells/CG)
81	S/F. of 45Wt. LED Street light fittings complete with G.I. bracket. Of Philips/Crompton/Bajaj category ISI marked as per direction Engineer-In-charge
82	Supplyingof . 1.5 Ton split type copper condensor A.Cmachine 3 star rated (Voltas/Carrier/Hitachi)
83	S/F of 4KVA stabilizer(V-guard,m-take)
84	S/F of 3pin 15A top for AC machine (Havells/ Anchor/ ligrand)
85	Supply of Steel Braket for fixing of olutdoor unit on wall
86	S/F of 1500VA or above inverter with 2nos 150Ah tubelar batteries with trolly etc. complete set. (for GF & Computer room) as per direction of engineer-in-charge.
87	Supply of 3.5C core 70 mm2 Al.Armoured cable ISI maked.(Make-Havells/Polycab/Equivalent)
88	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required.
89	Earthing.Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
90	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required
91	Supply, delivery and laying of 40mm HDPE pipe and cable inside the HDPE pipe as per construction standard specification and draning etc
92	Power DB: S/F of 12way Double Door DB with(63A DP mcb-1no, 6-32A sp mcb -10nos) (make for MCB & DB Schneider/Ligrand/L&T) as per direction of engineer-in-charge.
93	UPS DB: S/F of 6way Double Door DB with(63A DP mcb-1no, 6-32A sp mcb -4nos) (make for MCB & DB Schneider/Ligrand/L&T) as per direction of engineer-in-charge.
94	Power DB for AC: S/F of 2 + 18way Double Door TPN DB with(63A RCCB-1no, 20-32A DP mcb -9nos) (make for MCB & DB Schneider/Ligrand/L&T) as per direction of engineer-in-charge.
95	DG Panel:- Supply,installation,testing & commissioning ofdistribution control subpanel board wallmounted size 32\"x32\"x12\"made out of 16SWG cr sheet painted with one coat of gray enameled paint & two coat of red oxide paint with following arrangement. Incoming- 200A, 36KA, 4P MCCB-1no., 200a ONLINE CHANGEOVER SWITCH Outgoing-.300A Cu busbar(10mm x 3mm insulated)- 1 set, 63A 4P MCCB- 1no, 32A DP MCB- 10nos. Internal wiring with 6sqmm Cu wires, Indicating lamp(RYB)-1set(make-L&T/hager/HPL/ligrand)
96	S.I.T.C of distribution control panel board wallmounted size 40\"x48\"x12\"made out of 16SWG cr sheet painted with one coat of gray enameled paint & two coat of red oxide paint with following arrangement Incommer- 200A MCCB FP 25kA &300 amp electrolyte Cu bus bar. (10mm x 3mm insulated) Outgoing- 63A 4P MCCB- 3no, 32A DP MCB- 2nos with digital MFM, toggler switch, three nos led indicator and as per the direction of site engineer in charge (make: L&T/ Legrand/Schneider)
97	P.H WORKINTERNAL WORKProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge
98	20mm dia C- PVC Pipe
99	25mm dia C- PVC Pipe
100	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
101	32mm dia PVC Pipe
102	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
103	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
104	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
105	15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
106	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
107	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
108	25mm dia brassfull way valve (Shakti make)
109	32mm dia brassfull way valve (Shakti make)
110	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
111	15mm CP Extension piece
112	125mm CP grating
113	15mm size C.P. flange
114	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
115	2000 liters capacityPVC water storage tank (roof on 1st floor)
116	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
117	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
118	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
119	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
120	110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)
121	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
122	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
123	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
124	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
125	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
126	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
127	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
128	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
129	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
130	580mm size Orissa pan (Hindware/Parryware/Neycer make)
131	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
132	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
133	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
134	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
135	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
136	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock .with pedestal
137	Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge
138	Supplying all materials,labour,T&P and fixing Flat back lipped wall (long urinal) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
139	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
140	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
141	25mmx600mm long CP towel rail
142	Towel ring
143	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.
144	600mmx125mm plate glass shelf with CP/NP guard rails.
145	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
146	600mmx450mm size B.E mirror (swivelled type)
147	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
148	CP soap holder
149	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
150	½” x 5” CP Shower (Plaza Deluxe Make)
151	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
152	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
153	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
154	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
155	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
156	Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.67.57 x 0.15
157	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
158	Ground Floor 61.57 x 0.10
159	Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge )
160	Kajaria/Somany/Johnson tile 60cmx60cm
161	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
162	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
163	Kajaria/Somany/Johnson tile 60cmx30cm
164	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. 10 x 0.76 x 2.10
165	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge 10 x (2.10+2.10+.76)
166	Supplying all materials, labour, T&P and providing brick work in super structure with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
167	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 120 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 120 liter\"s along with 3 noa of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
168	Aqua guard pure Chill 120 PSS UV
169	Supplying all materials, labour, T&P and providing fitting and fixing of marble partition wall in Gents Urinal etc all complete as per approved drawing , specification and direction of the Engineer in charge
170	Supplying all materials, labour, T&P & constructing mesonary drain of size 0.30mtr x 0.45mtr drains as per P.H. design & specification including lead of all materials to site.
171	EXTERNAL WORKSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
172	110mm dia P.V.C. pipe
173	160mm dia P.V.C. pipe
174	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
175	MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
176	Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
177	1 no 50 users RCC septic tank
178	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge.
179	6.80x2.74x1.50=
180	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
181	6.80x2.74x0.30=
182	Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
183	2x(5.80+2.40)x2.00=
184	Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer incharge.
185	6.50x2.37x0.20=
186	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
187	6.50x2.37x0.20=
188	Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
189	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
190	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
191	R.C.C beams,columns,girder and bressmer etc.
192	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
193	Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
194	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
195	5.00x1.60x0.10=
196	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
197	2x1.60x1.65=
198	Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
199	1.60x0.25x1.50=
200	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
201	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
202	2x(5.65+2.25)x0.15x2.40=
203	1 no 30 Users Septic tank
204	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge.
205	4.09mx2.09mx1.50m=
206	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
207	4.09mx2.09mx0.63m=
208	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
209	4.09mx2.09mx0.08m=
210	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
211	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
212	3.66mx1.66mx0.10m=
213	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
214	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge
215	RCC floor, roof slab chhaja up to 4.430 m height
216	Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
217	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
218	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
219	Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification.
220	Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge.
221	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge.
222	1 no 30,000ltr R.C.C. Sump (6.00x2.50x3.00)
223	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
224	8x4.50x1.50=
225	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial laft.
226	8x4.50x1.00=
227	Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC.
228	Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge
229	7x3x0.15=
230	Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
231	7x3x0.15=
232	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
233	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
234	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge
235	RCC floor, roof slab chhaja up to 4.430 m height
236	2x2x(5.80+2.40)x1.50=
237	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
238	Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge
239	Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
240	Providing fitting and fixing RCPCcoveretc complete as per direction of Engineer-in-charge
241	1 no Pump House of size8\"-0\"\"x8\"-0\"\"
242	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. 2.63 x 4 x 0.80 x0.90=
243	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
244	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge.
245	Supplying all materials.labour.T&P and providing brick work in foundation and plinth with 23cmx11cmx8cm sizeKB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge.
246	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:6) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
247	Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.
248	Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge
249	RCC floor, roof slab chhaja up to 4.430 m height 2.65 x 2.65 =
250	Supplying all materials, labour, T&P & providing 2.5cm thick A.S. flooring with cement concrete (1:2:4) 12mm hard broken granite chips including conveyance of all materials, watering curing payment of royalty taxes etc. all complete as per direction of Engineer-in-charge.
251	2.40 x 2.40 =
252	Supplying all materials, labour, T&P & providing 2.5cm thick D.P.C. flooring with cement concrete (1:2:4) 12mm hard broken granite chips including conveyance of all materials, watering curing payment of royalty taxes etc. all complete as per direction of Engineer-in-charge.
253	10.52 x 0.35 =
254	White washing two coats with approved good stone lime over the interior surface of the walls and celing inculding all labour charges cost and conveyance of all materials, taxes and cost of indigo glue with T & P etc complete in all respect in frist floor and as per direction of the Engineer -in- charge
255	Supplying fitting, fixing in position angle iron window frame made out of 35mm x 35mm x 5mm, M.S. angle with required nos. of hinges and steel shutter made out of 25mm x 25mm x3mm, M.S. angle fitted with 20 gauge G.P. sheet/ steel plate and welded with tower bolt, handle hold fast & M.S. flat of 19mm x 3mm & welded with entire grill on windows and one coat of red oxide primer and fixing with C.C. (1:3:6) using 12mm size HBG CB Chips and making good to the damages and finishing the exposed surface smooth with watering curing etc. as per direction of the Engineer-in-charge.
256	Construction of 1no production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
257	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
258	Drilling of 200mm dia bore
259	00 mtr to 30mtr
260	30 mtr to 45mtr
261	Drilling of 150mm dia bore
262	45 mtr to 215.00mtr
263	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
264	Lowering of 200mm dia P.V.C casing pipes
265	00 mtr to 30 mtrs
266	30 mtr to 60mtr
267	Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
268	200mm dia PVC (sch-80) pipe
269	Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
270	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
271	By DTH Rig
272	Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
273	Rocky terrain with boulder formation for 300m depth
274	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
275	1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
276	DOL Control panel
277	40mm dia steel short piece
278	Well cap
279	50mm size CI bracket
280	2.50sqmm flat cable
281	20mm dia rigid UPVC pipes
282	Steel rope with cover
283	Labour charges for lowering including transportation
284	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge
285	32mm HDPE pipes (Finolex/Supreme make)

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Court Building For Jmfc At Bheden In The District Bargarh For The Year 2022-23., Bheden-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Court Building For Jmfc At Bheden In The District Bargarh For The Year 2022-23., Bheden-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us