|
| 1 | PART- 1 FAÇADE LIGHTING OF DHANUSH BRIDGE |
| 2 | Supply Instalation testing & commissioning of DMX controlled RGBW Linear Pixel Media tube luminaire, enabled with high power LEDs & anti-aging and anti-UV high optical efficiency temperature - resistant lenses, surface mounted with 150 ° beam, luminaire suitable for outdoor applications of Façade Lighting, depending on design and site requirement, with heavy duty extruded aluminum construction housing, powder-coated finish , Power consumption should be 16W at steady state full intensity, Luminaire luminous flux range of 500-550 Lm. Color rendering index CRI = 80 for white LEDS\"s and power factor of complete luminaire = 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non - integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 35 ° C. Ingress Protection = IP 67. Impact resistance level = IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : - 30 ° C to +45°C, Operating Humidity : 10%-90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. |
| 3 | Supply Instalation testing & commissioning of DMX controlled RGBW Linear luminaire, enabled with high power LEDs & anti - aging and anti - UV high optical efficiency temperature - resistant lenses, provided with visor, surface mounted with 10 ° x60 ° beam, luminaire suitable for outdoor applications of Fa ç ade Lighting, depending on design and site requirement, with heavy duty extruded aluminum construction housing, powder-coated finish , Power consumption should be 24W at steady state full intensity, Luminaire luminous flux range of 800-850 Lm. Color rendering index CRI = 80 for white LEDS\"s and power factor of complete luminaire = 0.90, at full intensity. Luminaire should be provided with suitable integral/separate non-integral power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 35°C. Ingress Protection = IP 67. Impact resistance level = IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : - 30 °C to +45 °C, Operating Humidity : 10% - 90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. |
| 4 | Supply Instalation testing & commissioning of DMX controlled RGBW DOT Pixel luminaire, enabled with high power LEDs & anti - aging and anti - UV high optical efficiency temperature -resistant lenses, surface mounted with 160 ° beam, luminaire suitable for outdoor applications of Fa ç ade Lighting, depending on design and site requirement, with die cast aluminim construction housing, powder-coated finish , Power consumption should be 3W at steady state full intensity, Luminaire luminous flux range of 180-200Lm@4000K. Color rendering index CRI = 80 for white LEDS\"s and power factor of complete luminaire = 0.90, at full intensity. Luminaire should be provided with suitable integral/Seprate power supply unit. Lumen maintenance of at least L70@50,000 burning hours at 35°C. Ingress Protection = IP 67. Impact resistance level = IK 07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : - 30 °C to +45 °C, Operating Humidity : 10% - 90%. THD should be less than 10%. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The fixtures proposed must have passed LM 79 & LM-80, Reports from NABL laboratory. The fixtures must be BIS Certified. Soft copy of IES file should be submitted along with bid. |
| 5 | Supply, Installation, testing and commissioning of DMX controller, shall be supporting PC and SD card based integrated control; works with sub controllers, can switch freely between PC control and SD card control automatically, when needed. Main controller shall be having Ethernet facilities to communicate with PC, multi- zone programming and SD memory card for preset control. Main controller shall be having capacity of controlling upto 5,00,000 pixels via Sub controllers |
| 6 | Supply, laying and Fixing of weatherproof Copper 4 Pair UTP Cat-6 Cable for DMX data transfer with Weather Proof IP Boxes including weatherproof connectors and laying of wires in existing conduits or trenches as |
| 7 | Supply and laying of 4.0 sq. mm x 3 core ISI marked, FRLS PVC insulated, single core copper conductor cable in exising conduits with proper connections, glands, etc |
| 8 | Supply and Laying of one number 4 core x25 q mm Aluminium UnArmoured PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground or pipe or trench as required including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 9 | Supply and fixing Power Supply Unit of 24 v6.3A, 200 watt |
| 10 | Supply and fixing IP67 weatherproof box for Power Supply with cable glands at input and output of the box, size of the box should be sufficient to accommodate the power supply of the fixtures |
| 11 | Supply, Installation, testing and commissioning of DMX Sub controller. Sub controller shall be capable of controlling multiple protocols like-TTL/ SPI/ DMX. The 8-universe controller shall be capable to work with PC as well as Main Controller. Sub controller shall be having Ethernet facilities. Sub-controller shall be having facility to address the fixutes on each port. Sub-controller shallbe capable of working with multiple type chips. |
| 12 | Installation, testing and commissioning of IP68 water proof connectors for power and data connections |
| 13 | Programming, testing and commissioning and maintenance of scenes for 3 years with programming of different color patterns as per engineer in charge. |
| 14 | Supply of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete. The instrument chamber shall be saprate and shall comprise of Multifunction meter and current transformer etc. The board shall have suitable cappcity electrolytic aluminium bus bars as per IS:8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC /DMC supports with detchable side covers and shall be suitable for extension on the sides .the switches shall be complete with suitable with cable and boxes ,revers entry boxes in case of pedestal type cable socket compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer Incharge The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm cubical type switch board shall be of Cat A, B & B = II only outdoor type with following incomming and outgoings INCOMMING MCCB-100Amp TPN-01 Multifunction meter-01 RYB Indicators-01Set Digital control Servo Voltage Stabalizer of 40KVA oil type with voltage range from 260Volt to 480VoltOUTGOING 63 Amp DP MCB- 08 No 15Amp Combined Socket-04No Space for company DMX Splitter and |
| 15 | Supply and laying of 20-25mm GI pipe type Earthing as required with proper bends or steel flexible pipe as per site conditions with proper welding of clamps, sockets and other accessories. |
| 16 | Machine,Crane, Scaffolding, Installation etc. |
| 17 | PART- 2 Façade Light at Ganga Cable Bridge |
| 18 | LED FLOOD LIGHT 3-Bar, LED Flood Light FixturePower: 150W per Operating voltage: 24VCCT: RGBW (6000K-7000K)Beam angle: 25°/ 45°/ 60° Housing: Die-cast/ extruded aluminium with separate compartment for driver/ decoder IP rating: IP67 IK rating: IK07 Protectiong: 2KV-4KVControl: DMX512 (4Channel) |
| 19 | LED PIXEL CURTAIN Max. Power : 325W/m² Operating Voltage : DC 12V CCT : RGBBrightness: = 1200cd/m² Pixel pitch: 52mm x 52mm IP Rating : IP67 Including dedicated controller & accessories |
| 20 | LED Pixel DOT for Media Facade lighting Power: 1.4W per pixel Operating voltage: 12V/ 24VSource: 2RGB + 1W Diffuser: Milky white Housing: Engineering plasticIP rating: IP66 Installation: Mounting seat/ Steel wire/ Front clips (Included) Control: SPI/ DMX512 |
| 21 | POWER SUPPLYSuppy of Constant Voltage Power Supply 12V/ 24V with power of 200W |
| 22 | MAIN CONTROLLERMain controller, shall be supporting PC and SD card based integrated control; works with sub controllers, can switch freely between PC control and SD card control automatically, when needed. Main controller shall be havingEthernet facilities to communicate with PC, multi-zone programming and SD memory card for preset control. Main controller shall be having capacity of controlling upto 5,00,000 pixels via Sub controllers. |
| 23 | SUB CONTROLLER Sub controller. Sub controller shall be capable of controlling multiple protocols like-TTL/ SPI/ DMX. The 8-universe controller shall be capable to work with PC as well as Main Controller. Sub controller shall be havingEthernet facilities. Sub-controller shall be having facility to address the fixutes on each port. Sub-controller shallbe capable of working with multiple type chips. |
| 24 | DMX Splitter/ Amplifier/ Isolator 4CH, DMX Splitter cum amplifier (Can be used as an isolator as per site) |
| 25 | Jointer5-pin \"T\" Jointer |
| 26 | Jointer5-pin \"I\" Jointer |
| 27 | Flexibal Cables5-core, 0.5 sq mm shielded flexible signal cable looped from sub-controller to fixtures |
| 28 | Flexibal Cables3-core, 1.5 sq mm flexible power cable |
| 29 | Flexibal Cables3-core, 2.5 sq mm flexible power cable |
| 30 | Armoured Cables 4-core, 10 sq mm armoured power cable |
| 31 | Connector 3 pole IP65 power cable \"I\" connector |
| 32 | Connector 3 pole IP65 Signal cable \"I\" connector |
| 33 | Connector 3/4/5 pole IP65 power cable \"T\" connector |
| 34 | Connector 3/4/5 pole IP65 Signal cable \"T\" connector |
| 35 | Distribution Box Power distribution board complete with all accessories like - Input Isolator, ELCB, Neutral/ Earth link, Output MCBs, Output connectors, Timer, etc. |
| 36 | Junction Box Power junction box for mounting Power supplies, complete with control MCB. |
| 37 | Junction Box Power junction box for mounting Controllers/ Decoders, complete with control MCB |
| 38 | Pipes 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 39 | AccessoriesAdditional accessories for installing lights as per the final drawing/site condition consisting of clamps, brackets, angles, conduites, joints, hardwares like fasterners, nut & bolts etc., |
| 40 | Programming Programming, Testing, commissioning, toubleshooting of Controlsystem |
| 41 | Programming Crane, Scaffolding, Installation, etc |
