General-Ths Cheruvathur Maintenance And Standardization Of Pump House Motor Equipment-Electrical Works-General Electrical Work, cheruvathur-Kerala

General-Ths Cheruvathur Maintenance And Standardization Of Pump House Motor Equipment-Electrical Works-General Electrical Work- 90.6.6.3:Supply And Drawing Frls Pvc Insulated & Sheathed 650 / 1100 V Grade 3 Core Copper Conductor Flat Cable For Submersible Pump Motor Conforming To Is 694 Part I 1990 As Required Including Giving Necessary Connections Of The Following Sizes.4 Sq Mm 3 90.14.28.2:S & F Motor Starters Of The Following Ratingsthree Phase Dol Starters For 0.25Hp To 7.5 Hp Motor 4 90.14.28.6:S & F Motor Starters Of The Following Ratingsfully Automatic Star Delta Starter For 15Hp Motor 5 Od141736 / 2021-2022:Supply And Installation Of Current Sensing Phase Failure & Uv+Ov Relay With Dry Run & Over Load Protection ( Delayed Auto Reset, 2 Co Contact ) On Din Rail ( Model:Minilec D2 Mpr2 ) . 6 90.6.10.2:Supply And Fixing Of Following Sizes Of Light Gauge Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required25 Mm 7 1.17.21:Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.3 X 4 Sq. Mm 8 1.17.31:Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.4 X 6 Sq. Mm 9 1.17.21:Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.3 X 4 Sq. Mm 10 90.16.1.3:Supply And Drawing Bare Earthing Conductors Of The Following Sizes Along With Wiring / Cables And Giving Connection As Required3.15 Mm Copper Conductor ( 10 Swg ) 11 90.16.5.3:Supply Of Superior Quality Copper Earth Socket For The Following Size Of Earth Conductor Including Crimping Etc. As Required.3.15 Mm ( 10 Swg ) 12 Od141821 / 2021-2022:Supply And Providing 25X3mm Brass Nut And Bolt Etc Are Required 13 Od141822 / 2021-2022:Supply And Providing 12X3mm Brass Nut And Bolt Etc Are Required 14 90.14.1.2:Fabrication, Supply, Conveyance, Installation Testing And Commissioning Of Floor Or Wall Mounting, Dust And Vermin Proof, Cubicle Type Mv Panel Board Comprising Of The Following Components / Devices & Complying To Is 8623.Fabrication Of Fully Partitioned, Dust And Vermin Proof Enclosure For Panel Assembly As Per Form 4 Of Is 8623 ( With Latest Amendments ) Using Crca Sheet As Per Approved Design And Requirement, With Front And Rear Access Facility, Bus Bar Chambers, Hinged Doors For All Switch Gear Compartments, Earthing The Doors Using 4 Sq Mm Braided Copper Conductor, Providing Necessary Cut-Outs For Mounting Meters, Relays, Indication Lamps, Bus Bar Interconnection Etc, Detachable Covers For Bus Bar Chamber And Cable Alley, Powder Coating The Assembly After Subjecting To 7 Tank Process Etc As Required. Crca Sheet Alone Be Used For The Fabrication. Angles / Flats / Slotted Angles Etc Shall Not Be Used For The Fabrication Of Panel Assembly. The Measurments Will Be Taken The Area Of The Complete Sheets Used For Panel Board Including Partitions, Folding, Shrouding Etc.Supply And Fabrication Of Mv Panel Board Using 1.6Mm Crca Sheet, Powder Coated ( Excluding Base Frame ) 15 90.14.5:Supply And Fabrication Conveyance And Installation Of Angle Iron Frame Work For Wall Mounting Panel Board 16 Od141851 / 2021-2022:Supply And Fixing Of 20 Mm Corrugated Pvc Flexible Conduit

INR 335 /-

INR 847.0 /-

INR 33879.0 /-