100mm PP FRP ducting ( For MDS )PP FRP ducting using 2mm thick PPGL sheets 3mmthick FRP lining using isothelic resin including flanges& bends, gasket, support with threaded rod, clamps,anchor fasteners, washer nuts and bolts including UVresistant painting
2
Blower, Motor
0.5 HP Single phase blower ( For MDS)Motor - (Crompton or equivalent)
3
Chemical Storage Cabinet
Chemical Storage Cabinet with glass door in GI Cons withinbuilt exhaust . Overall SizeH 1980mm, W 915mm, D485mmThe Chemical storage cabinet made of GPSP sheet ofuniformthickness of 0.8 mm for the body and shelves, 1.2mmfordoors’ frame duly cut and bends with the help CNCmachines. Cabinet should have two back sheets andinternal sheet isprovided with perforations. Top is provided withcutout of dia100 mm for exhaust of fume. The doors should beprovidedwith 4mm thick toughened glass having high qualityrubberbeading on all four sides and further holding withsheet metalstrips. The doors are provided with 3 way boltingsystem. Thetop and bottom end of the locking rod should behorizontallyhook type and to be inserted into the horizontal slotand 3-waylock should be operated by single key. The chemicalstorage cabinet shall be equipped with fouradjustable perforated shelves thereby making fivecompartments. The steel shelf shall be capable ofcarrying auniformly distributed load of 70 kgms .The tall cabinetshall beprovided with three hinges for each door havingremovablehinge pins. All the steel components should be pretreated forde greasing, de rusting and phosphating. After properpretreatment, the steel components should beepoxy powder coated and oven baked at temp. Above 200 deg. C toprovidescratch resistance surface coating film thickness 50 to 60microns.
4
Spot Extractor
Spot ExtractorMaterial Polypropylene. All faster will be made fromSS 304 grade material. Arm pipe diameter 72 mm .Dome diameter360 mm. NoteOne extractorsystem will covered 3 feet radius area
5
Chemical storage ducting
200mm PP FRP ducting ( For Chemical Storage & SpotExtractor )PP FRP ducting using 2mm thick PPGL sheets 3mmthick FRPlining using isothelic resin including flanges & bends,gasket, support with threaded rod, clamps, anchorfasteners, washernuts and bolts including UV resistant painting.
6
BlowerMotor
1 HP Three phase blowerMotor(Crompton or equivalent)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
