Ranipet District,Construction Of Anganwadi Building At Pillaipakkam In Veliyanallur Panchayat In Nemili Block Agamt Ii 2022-23 Package No 28
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2023
0 days left
EMD
16000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nemili → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Ranipet District, Construction Of Anganwadi Building At Pillaipakkam In Veliyanallur Panchayat In Nemili Block Agamt Ii 2022-23 Package No 28
BOQ
| Sl. No. | Item Description |
| 1 | Ranipet District,Construction of Anganwadi Building at Pillaipakkam in veliyanallur Panchayat in Nemili block AGAMT II 2022-23 Package No 28 |
| 2 | Earth work excavation for foundation in all classes of soils and sub soil to full depthexcept in hard rock requiring blasting but inclusive of shoring struttingif required forthe sides of foundation. |
| 3 | Collection and Supply of Gravel from Approved quarry including all charges etc complete |
| 4 | Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour chargesetc. |
| 5 | Brick work in C.M 1:5 mix using country bricks incuding cost and conveyance and all labour charges etc. |
| 6 | Below Basement |
| 7 | Above |
| 8 | Reinforced cement concrete 1:1.5:3 mix using 20mmISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete |
| 9 | Below Basement |
| 10 | Above |
| 11 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 12 | Upto Ground Level |
| 13 | Column Post Above GL |
| 14 | Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete. |
| 15 | Weathering coarse concrete using 20mm size broken brick jelly with in pure slaked lime overthe RCC Roof in the proportion of 32 : 12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications . |
| 16 | Finishing Top of Roof with one Couse of pressed Tiles set in cm:1:3Mix using tiles of size 20x20x2 cm etc |
| 17 | Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc. |
| 18 | Plastering with cement mortar 1:3, 10mm thick including cost and conveyance and all labour charges etc. |
| 19 | Cement Concrete 1:2:4 mix using 20mm metal including cost and conveyanceof all materials to work site and all labour chargesetc. |
| 20 | Paving the Floor with scratch proof vertified tiles of size 600x600x8mm laid in CM 1;2,10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to siut thecolour of the tilesincludingcost and conveyance of all materials to site and all labour charges etc complete |
| 21 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)Using anti-skid tiles (Observed Data) |
| 22 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and ThreeM.Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. |
| 23 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes 150mmX 150mmX 6mm set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., |
| 24 | Towards the cost of steel door of size0.90 mx2.40m including all charges etc. |
| 25 | Towards the cost of steel door of size 0.75mx1.5 m including all charges etc. |
| 26 | Towards the cost of steel door of size 1.10mx2.40 m including all charges etc. |
| 27 | Towards the cost of steel ventilator of size 0.9x0.45 m including all charges etc. |
| 28 | Towards the cost of steel window of size 1.2m*1.6m including all charges |
| 29 | Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc |
| 30 | Paintingtwo coatwith approved quality ofdistemper with colour over one coat of white cement forprimier coat for the base including preparing surface and all materials cost labour etc |
| 31 | Painting two coatwith ready mixedplastic emulsion of firstquality paint and of approved colour over apriming coatincluding thorogh scarpping clean removal of dirt etc complete. |
| 32 | Painting two coats using Ist quality readymix enamel paint of approved colour over new iron work including cost and conveyance and all labour charges etc. |
| 33 | Water supply and sanitaryarrangements |
| 34 | 500 lit tank |
| 35 | 25mm UPVC pipe |
| 36 | 25mm UPVC elbow |
| 37 | 25mm UPVC Bend |
| 38 | 25 mm UPVC Tee |
| 39 | 110 mm PVC PIPE 6Ksc |
| 40 | 110mm pvc tee |
| 41 | 110mm pvc elbow |
| 42 | 15 mm diacp down tap |
| 43 | Cost & Supply For Baby W.C including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 44 | Cost & Supply For E W.C including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 45 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 46 | Cost & Supply of Cudappah Slab including cost and conveyance ofall materials to work site and labor charges etc complete. |
| 47 | Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete. |
| 48 | ELECTRIFICATON |
| 49 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A F.T. switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point. |
| 50 | Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A F.T. switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for Fan point (For electronic Regulator) |
| 51 | Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter lockingWall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. |
| 52 | Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. |
| 53 | Supply and fixing of 1200mm sweep AC Ceiling fan complete with stepped electronic300w regulator with 300mm down rod on the existing clamps (crompton make). |
| 54 | Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains |
| 55 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W Tube light |
| 56 | Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection only |
| 57 | Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 20mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron up right and end supports for mains |
| 58 | Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. |
| 59 | GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Jul 14, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 20, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender