Rural Water Supply And Sanitation Division has published Tender For Construction Of Solar Energy Based Mini Water Supply Scheme With 6M High Galvanized Tubular Steel Structure Staging For Mounting Hdpe Water Storage Tank Having Capacity 5000 Liters At Nahanabud And Kripsira Chhack Under Hemgir Block. Submission Date for this Tender is 25-07-2023. Water Tank Tenders in sundargarh Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Construction of Solar Enegry based Mini Water Supply Scheme with 6m High galvanized tubular Steel Structure staging for mounting HDPE water storage Tank having Capacity 5000 Liters At Nahanabud and Kripsira Chhack under Hemgir Block |
| 2 | Supplying and Fitting Solar Pumping Machinery in Tube wells. Provision & Installation of Solar Powered submersible Auto run & Stop DC Pump Motor (900 Wp) of stainless steel suitable for minimum 125mmx115mmbore well,discharge of 10,000 litres per day from a total dynamic head of 60 mtrsas per MNRE specifications with lowering, up to 57.00 m,suitabledia HDPE pipe & 2.5 sq mm x3 core flat submersible cable of IS:694:1190 including mono /Poly Crystalline PV array (900WP) mounted on independent steel structure of 3 mtr height in a suitable direction to optimize panel use and withstand the wind pressure up to 200 Km /hour & making suitable arrangements to operate Hand pump manually in the same bore when there is no solar power with the help of special water chamber including 5 years warranty against defects in materials and workmanship with locking arrangement of switch board . the system should be ECO-friendly.Solar Pump should have remote monitoring device. (a)The PV Modules should be mounted on hot dip galvanized metallic structure of adequate strength as per design and drawing iven in annexure -with fencing .(b)Components &parts used in the solar pumping system including the metallic structure (MS)should confirm to the BIS (c)The rates of solar pumping system includes compressive maintenance contract for 5 years . During CMC period the contractor has to visit the installation on quality basis and also on intimation of Defect from user . During CMC Contractor shall have to repair /replace the parts found defective due to manufacturing defect free of cost. Maximum shut off head 90 mrs (e)Cable 2.5mmx3core as per IS 694 (f)Control panel suitable for above pumpset with arrangement of dry run and over flow protection ,sensor, float switch & rain preventive box etc and remote monitoring unit. (g)Lighting arrestor. (h)Controller for sensor for over flow and dry run. |
| 3 | Construction RCC Foundation for Steel structurestaging& Solar panel . Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B) |
| 4 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume) |
| 5 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I |
| 6 | Providing nominal mix PCC of (1:4:8) in foundationwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I |
| 7 | Providing RCC M-20 in nominal mix of (1:1.5:3) in columnswith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I. Raftand Footing |
| 8 | Column |
| 9 | Tie Beam |
| 10 | Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 11 | Construction ofgalvanized squre pipe Steel structure staging forHDPEwater storage Tank& Solar Panel. For Structure :--- Providing structural steel galvanisedsqure pipe section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge ,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete. |
| 12 | Steel Structure for Solar Panel |
| 13 | Information board for IEC Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete (MJP DSR-2018-2019) |
| 14 | Providing & Laying of Rising Main, Delivery pipes and fitting &HDPE water storage Tank. Earth work in excavation inPipe Line Trenches in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. |
| 15 | Supplying all materials, labour T&P etc for laying in trenches the High Density polyethylene pipes and specials conforming to IS:4984-1995 of following out side diameters and class -1 to Class- 4 and jointing by Fusion Welding method excluding earth work including jointing materials & jointing of PVC pipes and specials as per IS specification including testing of pipe line conveying pipes and specials, from store to work site etc. all completeas per the direction of E.I.C. 50mmHDPE Pipe PE:80 PN:10.0 |
| 16 | 40mm HDPE Pipe PE:80 PN:10.0 |
| 17 | 32mmHDPE Pipe PE:80 PN:10.0 |
| 18 | Supplying all materials, labour, T&P and filling with sand including watering ramming including cost, carriage and royalty of all the materials etc. all complete. |
| 19 | Cutting CC Road including Dismantling and removing cement concrete for taking pipe line including stacking the useful material for reuse and removing the debris within 50m lead. |
| 20 | Supplying all materials, labour, T&P and providing Cement concrete(1:2:4) with 12 mm size HG chips for road mending work including cost carriage royalty of all materials etc all complete. |
| 21 | Supplying all labour, materials, T&P , carriage , taxes of materialsetc. including fitting & fixing cast Iron sluice valves, NR valves, Butterfly valves with double flanged end for water works purposes for the followingnominal diameter as per specification complete as per direction of Engineer-in-charge (including the cost of IS marked cast Iron sluice valves , IS No. 14846/2000, Non Return Valve IS No. 5312(Part-I)/84, bolts & nuts, rubber insertation. 50 mm dia CI DF Sluice Valve |
| 22 | Providing and fixing 32mmdia(wt.not less than 600 gram) ISI Mark full way wheel Valve approved qualityas per specificationand direction of E/I. |
| 23 | Providing and fixing HDPE container IS : 12701 one piece moulded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity 5000.00litres (Anaylsis Attached). |
| 24 | Providing and erecting chain link fencing 1.6 M. height withG.I. chain link of size 50 x 50 mm 8 gauge thick and fixed 75mm above Ground level on vertical M.S Angle of 40 x 40 x 6 mm size including excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 300 x 3000 x 670 mm. at 1.25M.c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mmsize and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm Angles both sides at every corner or bends embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. |
| 25 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18 kg. to 20 kg. Per Sq.m.) As directed by Engineer- in-charge. Gate for fencing |
| 26 | Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 27 | Providing PCC M-150 in nominal mix of (1:2:4) in foundationwith approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I.(SOR-5.3.2). |
| 28 | O &M for Five Years @ 1.5% per Year |
| 29 | FHTC Supplying of all labour, T&P, material incluiding taxes for providing individual house hold water supply connections including cost of earth work, service pipe laying up to boundary of indivial, fitting & fixing of saddle, 1/8" GM ferrule, 1/2" GM stop cock & CI handle cock etc.complete as per direction of the Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
