Tender For Installation Of Lt Network At Tilgam, B Block(Pattan), Ph(Tilgam B) Under Pri Grants 2023-24

Sharing tender

Tender For Installation Of Lt Network At Tilgam, B Block ( Pattan ) , Ph ( Tilgam B ) Under Pri Grants 2023-24- 1 Supply , Transportation And Errection Of 9Mtr Long St Poles ( 410 Sp-33 ) Completely Errected In The Pit Of 1 / 5Th Of The Pole Length Including Excavation And Back Filling Of The Pole Pit. ( As Per Rec Standard ) 2 Supply, Transportation And Errection Of 8Mtr Long St Poles ( 410-Sp 15 ) Completely Erected In The Pit Of 1 / 5Th Of The Pole Length Including Excavation And Back Filling Of The Pole Pit . ( As Per Rec Standard ) 3 Supply, Carraige Upto Site, , Laying , Stringing, Tensioning , Binding Of Acsr Conductor, ( 30Mm2 Acsr Conductor ) As Per Rec Standard. 4 Supply, Carraige Upto Site, , Laying , Stringing, Tensioning , Binding Of Acsr Conductor, ( 50Mm2 Acsr Conductor ) As Per Rec Standard. 5 Supply, Transportation And Fixing Of Gi Channel / Angle Iron For Cross Arms, Braces, Transformer Belt, F-Top, Collers Etc For Sub Station And Poles ( Complete Job Including Nuts & Bolts And Washers ) 6 Supply And Fixing Of 11Kv Polymeric Composite Pin Insulator 12Kv, 5Kn, Lighting Impulse 75Kv Positive And 80Kv Negative, Creepage Distance 320Mm 7 Supply And Fixing Of Lt Shackle Insulators With G.I Mukhi Clamps ( Scaffolding G.I Lt Clamps ) Including Nuts And Bolts As Per Rec Standard 8 Earthing Of Poles Complete By Gi Pipe 40 Mm 3Mtr Long Through Gi Strip 25X3 Mm ( As Per Rec Standards ) 9 Supply, Carriage Up To Site, Installation, Testing And Commissioning Of Danger Plates 10 Supply, Carriage Up To Site, Installation, Testing And Commissioning Of Anti-Climbing Devices With Clamps 11 Cement Bottoming Of S.T Poles In 1:2:4 Mix1 / 6Th Of The Height Ofpole Below The Ground And 1Ft Above The Ground Cylnerical Shapewith Circularradius 9” From The Pole Centre ) Using 40Mm Crushedstone Aggregate Mix. As Per Drawing 0.5 Cum / Polepit = ( 600X600x1600 ) & Tappered At The Top. ( As Per Rec Standard ) For 9 Mtr St Pole 12 Cement Bottoming Of S.T Poles In 1:2:4 Mix1 / 6Th Of The Height Ofpole Below The Ground And 1Ft Above The Ground Cylnerical Shapewith Circularradius9” From The Pole Centre ) Using 40Mm Crushed Stone Aggregate Mix. As Per Drawing 0.45 Cum / Pole ( Pit 600X600x1433.3 Mm ) For 8 Mtr St Pole 13 Poviding And Painting Of St Poles With One Coat Of Red Oxide And Two Coats Of Aluminum Paint To Give An Even Shade Using Anti Corrosive Paint Of Standard Brand ( Nerolac / Asian ) Paints ) Including Cost Of Paint Along With Stamping On Poles Showing Therein Name Of The Firmdate, Year Of Instllaiton And The Debitable Head Etc. 14 Supply, Carriage Up To Site, Installation, Of Sign Board ( 2X2 Feet ) ( Inscribed With Substation Details Provided By This Division ) Along With Required Accessories Like Clamps, Nuts And Bolts Etc. 15 Supply, Carriage Up To Site, Installation, Testing And Commissioning Of Sundry Items Like Aluminium Lugs, Jumpers, Binding Tapes Etc. 16 Pre, During And Post Execution Geo Tagged Photographic Evidence Consisting Of 5X7 Inch Photographs In Coffee Table Book ( Covering Each Pole / Sub Station )