Tender For Devakottai Municipality-15Th Cfc 2023-24 Un-Tied Grant Lpg Conversion
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Jul 2023
0 days left
EMD
31000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
devakottai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Devakottai Municipality-15Th Cfc 2023-24 Un-Tied Grant Lpg Conversion Devakottai Municipality-15Th Cfc 2023-24 Un-Tied Grant -Modernisation Of Existing Gasifier Crematorium At Ramnagar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 19-Jul-2023 | Date Extended | Date | 26-Jul-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | Service and replacement of scrubbing unit made of MS with Thickness 2mm,and Pipelines, Design & fabrication of high-speed impellor made of Material MS grade, Dimensions 500mm dia 150mm height and 3mm thickness – 1No. Design and manufacturing of impellor matching shaft of 65mm dia, 600 mm long, to match suitable bearing, Pulley, slated keyway, High speed SS Bearing UCB type – 2Nos, Matching pulley,matching poring and Slate keyway drilling Balancing of impellor at 1400 RPM Service of water spray and fixing of pipelines Coil winding of 5HP motor and replacement of Suitable bearings. Service and replacement of ID Blower MS.main door with open and close gear motor system connected to Control panel at your existing Crematorium furnace. |
| 2 | Service and replacement of body crematorium area bottom place Fire refractory bricks grade suitable size.Supply and fixing of body Placing bed IS8 slabs 40% aluminum 24 x 12 x 3(inches). Bed size 300mm height and 2-meter long 600mm width body placing bed by fixing cast-ironframes.Removal of old damaged body placing bed. |
| 3 | Supply and fixing of Pipelines and ducting-fixing and welding. 20 mtr long, 300 mm dia, 4mm thick, flanges, boltnut,gasket, 90-degree bend including all labor charges etc |
| 4 | Design, fabrication, Supply and fixing of furnace Manual Operated main door Door dimension 1200mm x 1400mm x 225mm Door support given by MS Angles. Providing door Insulation material 96 grade fiber Blanket up to 1260 Deg Celsius lining fully supported by stainless steel studs 304 grade. Covering the door fully using mild steel. Handing over in smooth running condition. (Up and down movements) |
| 5 | Providing LPG manually firing system, includes following items, a) Supply and fixing of 10 cylinders manifold -1No,4 burners Non-return valve -10Nos, Metallic flexible hose -10 Nos, Main ball valve -1No, high Pressure regulator -1No,Needle valve with copper tube -1No, Pressure dial Gauge -1No,Flow control valve (1”) -1 No,High velocity burners (Ni-21% Cr-25%) -6 Nos,LPG pipeline 1” Dia -1Set, 1” Pipe flanges -1Set l), LPG pipeline ¾” Dia -1 Set, ¾” Pipe flanges -1Set, Suitable Fasteners(Bolts, Nuts, & washers) -1Set, ¾” Ball valve -1No, 4”Dia 1 meter long 304 pipe -6Nos, 1” Dia 1 meter long 304-6 Nos, Hex Nipple 3mm Dia -6 Nos, 1’ union -4 Nos, Copper tube 1-meter long 8mm Dia -6 Nos Copper tube 1 meter long 10 mm Dia -1No, ¾” Pipe nip -10 Nos, Burner covering insulation material 1260 Deg Cgrade ceramic fibers work. The rate inclusive of alMaterials and all labor charges etc.Providing burner fixing Holes of 4” dia at both sides of the wall at your existing gasifier crematorium furnace |
| 6 | Fully Automatic LPG fired burner (35000 Cal)4 nos.Electrical Control Panel features:• 5hp blower-1no• 2hp water pump1no• Burner Outputs4nos• Temp Controller 1nos• Temperature couple 1nos• Compensating cable 1set• Burner to panel cables 10 core.75sqmm 4set(65MTRS)• Sensor K-TYPE1set• Automatic door up to down 0.5HP 3PH |
| 7 | Supply and fixing operating control panel backup DG set, temperature controller, voltmeter, ammeter, main on off switch, MCB relay, on off indicator switches, indicator lamps, connecting wires and cables |
| 8 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 9 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 10 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 11 | Provision for GST 18% |
AI Tender Summary
Tender Timeline
Jul 19, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 26, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJul 26, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 26, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender