Tender For Construction Of Road From Jatangpi Chowk To Jojobera River In Ipilsingi Panchayat (Length- 2.700Km)
Tender Value
2.39 Crore
Estimated cost
Bid Submission
25 Jul 2023
0 days left
EMD
4.79 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kumardungi → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road From Jatangpi Chowk To Jojobera River In Ipilsingi Panchayat ( Length- 2.700Km )
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.S.O.R. Item No. 2.02 |
| 2 | Clearing and Grubbing Road Land (Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.)S.O.R Item No. 2.03 (I) A |
| 3 | Excavation in Soil using Hydraulic Excavator including cutting and loding in Tippers,trimming bottom and side slopes,in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m) |
| 4 | Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.S.O.R. Item No. 3.18 |
| 5 | Construction of Embankment with approved Material Deposited at site from Roadway Cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2)S.O.R Item No. 3.17 |
| 6 | Granular Sub-base with Close Graded Material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401)(By Mix in Place Method)With Grading-I MaterialS.O.R Item No. 4.01 B. (i) |
| 7 | Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layer swith grader in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.)S.O.R. Item No. 4.14 B |
| 8 | Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).S.O.R. Item No. 5.01 A (i) |
| 9 | Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)S.O.R. Item No. 5.02 (i) |
| 10 | Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.)Bituminous Macadam for Grading II: (19 mm nominal size)S.O.R. Item No. 5.03 (ii) |
| 11 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects.Semi-Dense Bituminous Concrete, Grading-II (10 mm size)S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th) |
| 12 | Construction ofun-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design,laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using curing compound (where specified) and water finishing to lines and grade as per drawingand Technical Specification Clause 1501S.O.R Item No. 6.4 |
| 13 | Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii) |
| 14 | Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc. Hectometer stone (precast) - S.O.R. Item No. 8.14 (iii) |
| 15 | Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting etc.Boundary pillar -S.O.R. Item No. 8.16 |
| 16 | Retro-reflectorised Traffic signs (Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing)S.O.R. Item No. 8.04 A (x) |
| 17 | Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqmfixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing)S.O.R. Item No. 8.05 |
| 18 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sq marea, thickness of 2.5mm isexclusive of surface applied glass beads as per IRC:35. The finished surface to belevel, uniformand free from streaks and holes..S.O.R. Item No. 8.13 |
| 19 | Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.S.O.R. Item No. 3.13 (i) A |
| 20 | Construction of dry rubble flooring at cross drainage works for relatively less important works.S.O.R. Item No. 16.09 |
| 21 | Plain/ReinfocedCement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15S.O.R. Item No. 12.08 A Case-ll |
| 22 | Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications.Random Rubble masonry (coursed/uncoursed)S.O.R. Item No.12.07 (B) |
| 23 | Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications, Random Rubble Masonry (Coursed/uncoursed)S.O.R. Item No. 13.04 A |
| 24 | Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)S.O.R. Item No. 12.07 (A) |
| 25 | Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)S.O.R. Item No. 13.04 B |
| 26 | Plain/Reinforced cement concretein sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15S.O.R. Item No.13.05 A (p) |
| 27 | Constructaion of Dry lean cement concrete sub base over a prepared sub grade ,finishing and curing complete as per drawing and technical specifications. S.O.R. Item No. 6.1 |
| 28 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications.S.O.R. Item No.13.08 |
| 29 | Pointing with cement mortar (1:3) on brick work in substrucutre as per technical specifications.S.O.R. Item No.13.02 |
| 30 | supplying laying fitting and fixing 1000mm dia Np, Hume pipe in line all complete job as per specification and direction of E/I |
| 31 | Plastering with cement mortar (1:3) on brick work in substructure as per technical specificationsS.O.R. Item No. 13.03 |
| 32 | White washing two coats on parapet wall and tree trunk including preparation of surface by cleaning scraping etc as per technical specifications |
| 33 | Goods & Service Tax (G.S.T.) - |
| 34 | Labour Cess - |
AI Tender Summary
Tender Timeline
Jul 13, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 28, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender