Institute Of Medical Sciences-IOMS has published Tender For Construction Of Brick Wall Of Western Side And Expansion Of Eastern Side Corridor Of Physiotherapy And Occupational Centre Block At Pmr Department, Rims,Imphal.. Submission Date for this Tender is 24-07-2023. Wall construction Tenders in Imphal West Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 metres lead as per direction of Engineer - in- charge. |
| 2 | Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceablematerialwithin 50 metres lead as per direction of Engineer-in-charge. |
| 3 | In Cement mortar |
| 4 | Dismantling doors, windows and clerestory windows (steel orwood) shutter including chowkhats, architrave, holdfasts etc.complete and stacking within50 metres lead :15.11.1 |
| 5 | Of area 3 sq. metres and below |
| 6 | Demolishing lime concrete manually/ by mechanical means anddisposal of material within 50 metres lead as per direction ofEngineer in charge. 15.1.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 7 | Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within 50metres lead : |
| 8 | Upto 10mm thick |
| 9 | Brickwork withIst classcommon burnt clay F.P.S.(nonmodular) bricks in superstructure above plinth level upto floor V level in allshapes and sizes in : |
| 10 | Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 11 | Half brick masonry withIst class common burnt clay F.P.S.(nonmodular) bricks insuperstructure above plinth level upto floor V level in |
| 12 | Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 13 | Reinforcement for R.C.C.work including straightening,cutting,bending,placing in position and binding all complete.Above Plinth level |
| 14 | Thermo-Mechanically Treated bars |
| 15 | Reinforced cement concrete work in walls(anythickness),including attached pilasters,buttresses,plinth and string courses,fillets,columns,pillars,piers,abutments,posts and struts etc.above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : |
| 16 | 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 17 | Reinforced cement concrete work in beams, suspended floors,roofs having slope upto 15° landings, balconies, shelves, chajjas,lintels, bands, plain window sills,staircases and spiral stair casesabove plinth level upto floor five level, excluding the cost ofcentering,shuttering, finishing and reinforcement with 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mmnominal size). |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 19 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses et |
| 20 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 21 | 15 mm cement plaster on rough side of single or half brick wall of mix |
| 22 | 1:4 (1 cement : 4 coarse sand) |
| 23 | 12 mm cement plaster of mix |
| 24 | 1:4 (1 cement : 4 coarse sand) |
| 25 | Providing and fixing aluminium work for doors, windows,ventilators and partitionswith extruded built up standard tubularsections/ appropriate Z sections and other sections of approvedmake conforming to IS: 733 and IS : 1285, fixed with rawl plugs andscrews or with fixing clips, or with expansion hold fastenersincluding necessary filling up of gaps at junctions, at top, bottomand sides with required EPDM rubber/ Neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle,Aluminium snap beading for glazing / panelling, C.P. brass /stainless steelscrews, all complete as per architectural drawingsand the directions of Engineer-in-charge. (Glazing and panelling tobe paid for separately): |
| 26 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 27 | Providingandfixingglazinginaluminiumdoor,window,ventilatorshuttersandpartitionsetc.withEPDMrubber/neoprenegasketetc.completeasperthearchitecturaldrawingsandthedirectionsofengineer-in-charge.(Costofaluminiumsnapbeadingshallbepaid in basic item): |
| 28 | With float glass panes of 4.0 mm thickness |
| 29 | 12mm thick pre laminated particle board (decorative lamination on both sides) grade -1 ,meidum flat pressed ,three layer particle board FPT -I or graded wood particle with BWP type synthetic resin adhesive as per IS :3087 and |
| 30 | Providing and fixing 1st quality ceramic glazed wall tilesconforming to IS : 15622 (thickness to be specified by themanufacture of approved make in all colours, shades exceptburgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointingwith grey cement slurry @ 3.3kg per sqm including pointing inwhite cement mixed with pigment of matching shade complete. |
| 31 | Steel work welded in builtup section/framed work including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer using steel etc. as required. |
| 32 | In grating,frames,guardbar,railing,brackets, gates and similar works. |
| 33 | Providing & fixing UV stabilised fiberglass reinforced plastic sheetroofing upto any pitch including fixing with polymer coated ‘J’ or‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washerscomplete but excluding the cost of purlins, rafters, trusses etc. Thesheets shall be manufactured out of 2400 TEX panel rovigsincorporating minimum 0.3% Ultra-voilet stabiliser in resin systemunder approximately 2400 psi and hot cured. They shall be ofuniform pigmentation and thickness without air pockets and shallconfoim to IS 10192 and IS 12866.The sheets shall be opaque ortranslucent, clear or pigmented, textured or smooth as specified. |
| 34 | 2mm thick flat |
| 35 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: |
| 36 | Two or more coats on new work |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and makinggood the walls wherever required: |
| 38 | White Vitreous China Surgeon type wash basin of size 660x460mm with a pair of 15 mm C.P. brass pillar taps withelbow including operated levers |
| 39 | Providing and laying rectified Glazed Ceramic floor tiles 300x300mm or more (thickness to be specified by the manufacturer) of1st quality conforming to IS :15622 of approved make in coloursWhite, Ivory, Grey, Fume Red,, Brown, laid on 20mm thick cementmortar 1:4 (1 Cement : 4 Coarse sand) including grouting thejoints with white cement and matching pigments etc., complete. |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering --All work upto plinth level: |
| 41 | 1:4:8 ( 1 Cement: 4 coarse sand : 8 graded stone aggregate 40 mmnominal size) |
| 42 | Providing and fixing at all height false ceiling including providingand fixing of frame work made of special sections, power pressedfrom M.S. sheet and galvanised with zinc coating of 120 gms/ sqm(both sided inclusive) as per IS : 277 and consisting of angle cleatsof size 25mm wide x 1.6mm thick with flanges of 27mm and37mm, at 1200mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5mm diax50mm long with 6mm diabolts,other flange of cleat fixed to the angle hangers of25x25x0.55mm of required length with nuts and bolts of requiredsize and the other end of the angle hanger fixed with intermediateG.I. channels 45x15x0.9mm running at the spacing of 1200mmcentre to centre, to which the ceiling section 0.5mm thick bottomwedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clipsmade out of 2.64mm diax230mm long G.I. wire at every junction,including fixing perimeter channels 0.5mm thick 27mm high havingflanges of 20mm and 30mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws @ 230mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with thehelp of dry wall permanufacturer"s specification and also including the cost of makingopenings for light fittings, grills, diffusers, cutouts made withframe of perimeter channels suitably fixed, all complete as perdrawings, and specification and direction of the Engineer in Chargebut excluding the cost of painting with : |
| 43 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I |
| 44 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. |
| 45 | Two or more coats on new work- |
| 46 | Kota stone slab flooring over 20 mm (average) thick base laid overand jointed with grey cement slurry mixed with pigment to matchthe shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement: 4 coarse sand): |
| 47 | 25 mm thick. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
