Tender For Construction Of Car Parking / Entrance Path And Face Lifting Of 02 Number Huts Including Construction Of Fencing At Back Side Of Hutment Area Of Chatapal Park.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Jul 2023
0 days left
EMD
25000
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kokernag → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Car Parking / Entrance Path And Face Lifting Of 02 Number Huts Including Construction Of Fencing At Back Side Of Hutment Area Of Chatapal Park.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected:in allkinds of soils. |
| 2 | Dry stone solinghand packedincluding supply of stones and preparing surface carraigecomplete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: i)Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all carraigescomplete as per direction of Engineer-in-charge.The compressive strength certiicate of M-30 Grade be producedat the time of Start of Tilework. |
| 7 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand)including curing.One face dressed Fine chisel dressed |
| 8 | Supplying at site angle iron posts and struts of Reqd. size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10mm dia etc. complete |
| 9 | Providing and fixing G I chain Link fabric fencing of Reqd. width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts bolts and washers as reqd. all carraiges complete as per direction of Engineer in Charge made of G I wire of dia 4mm. |
| 10 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc completeOn steel work |
| 11 | Removing Old Paint and Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete.On steel work |
| 12 | Removing old Paint and Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications:13.57.2 Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 13 | Providing Retro-reflective regulatory sign board of size 900mm diameter made out of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by Engineer-in-charge. Letter, symbols, borders, etc. will be as per IRC:67 with required colour scheme on the boards and with the high intensity grade A. the aluminum sheet to be riveted to M.S. frame of angle iron ofsize 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post made of M.S. angle 50x50x4mm, 4m long welded to the frame with adequate anti-theft arrangement. Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminum sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per directions of Engineer-in-charge. |
| 14 | carriage of different material including loading unloading and staking upto lead of 50mt by average distance of:- |
| 15 | Cement |
| 16 | Sand |
| 17 | Aggregate |
AI Tender Summary
Tender Timeline
Jul 12, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender