Allahabad Development Authority-ADA has published Tender For Redevelopment And Beautification Of Sarojini Naidu Road From Patthar Girja Ghar To Muir Road Prayagraj. Submission Date for this Tender is 22-07-2023. Road Work Tenders in prayagraj Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PATHWAY Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast 40 mm nominal size) and curing complete, including the cost of all labour T&P etc complete. PWD-281 |
| 2 | Sand filling with local sand including supply of all labour, material and T&P etc. required for proper completion of the work.(DAR 18.41.1A) |
| 3 | Laying of interlocking tile of thickness 60 to 80 mm including levelling and dressing of surface to required level and slope, filling joints with local sand including the cost of all labour T&P etc complete but excluding the cost of all material (Labour only) (PWD CH .20 ROAD WORK) |
| 4 | Supply of 80mm thick ruber mouldingcopressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick lopping of DP cement mixed with 25% marble powder. The compressivr strength of concrete paver block shall not be less than 30 MPa & Including cost of all material, Labour, T&P etc. required for proper complection of work as directed by engineer in charge. (Analsys Rate Based on SoR 2022) |
| 5 | SKATING SYNTHETIC Supply and laying of MOLDO Syntheic 8-layer 2mm thick acrylic surface for skating. In this system we shall apply 1 layer of primer, 1 layer of resurfacer, 3 layers of cushion, 2 layers of color and court markings with different colour options and design patterns as per the approval of client or site incharge. This is a cushioned system which makes for comfortable and enjoyable play. Make-Moldo Sports |
| 6 | SERVICE DUCT Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 m. (100 fts) from the foundation trenches. (Rate is including Royality). |
| 7 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast 40 mm nominal size) and curing complete, including the cost of all labour T&P etc complete. PWD-281 |
| 8 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. |
| 9 | M-150 brick work in 1:4 (one cement and four coarse sand sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. |
| 10 | M.S. (tor steel or plain ) in plain work such asa RCC or RB work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST (DSR Base-2021) Rate 89.65X0.8681=77.83 1008 X 0.785 X 1%=791.28 |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). |
| 12 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 Coarse sand |
| 13 | Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design:(With 20x20mm square bar) |
| 14 | SIGNAGE WORK Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing Engraving letters etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. (DSR-8.11.1) |
| 15 | CONSTRUCTION OF BOUNDARY WALL WITH MS GRILL Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 16 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast 40 mm nominal size) and curing complete, including the cost of all labour T&P etc complete. PWD-281 |
| 17 | R.C.C. workwith cement approved coarse sandand2cm. (3/4") guageapproved stoneballastin the proportion 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire andincludingnecessary centering and shuttering etc.and also including supply of all materials,labour andtoolsand plants etc,required for proper completion of the works.strength of the concrete shall not be less than M-200. (PWD-283+2.06*280.00) |
| 18 | As in item 3 above but in R.C.C. columns in1:1.5:3having strength not less than M 150. (PWD- 289) |
| 19 | As in item 3 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3Mix concrete)(PWD-287-a) |
| 20 | M.S. (tor steel or plain ) in plain work such asa RCC or RB work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST (DSR Base-2021) Rate 89.65X0.8681=77.83 1008 X 0.785 X 1%=791.28 |
| 21 | Brick work in foundation in 1:6 upto plinth level up including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12cms. (PWD- 303+(305a-305) |
| 22 | Brick work in super structure in 1:6 super-structure above plinth level up to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required and also includinghoney combed brick work in thickness of wall more than 12cms. (PWD- 303+(305a-305)+309+310) |
| 23 | Same as in item no. 7 but in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below. (PWD- 305a+309+310+310a) |
| 24 | 12 mm cement plaster in single coat on rough side of single or halfbrick wall for exterior plastering up to floor two levelincluding internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. With water proofing material. 1 cement :6 coarse sand(PWD-13.12d+.015*250.00) |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R.-13.80*0.8681 |
| 26 | Finishing walls with Premium Acrylic Smooth / Metalic Paint paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) D.S.R.-13.47.1*0.8681 |
| 27 | Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any. D.S.R.-4.13*0.8681 |
| 28 | Making grooves 10 to 12mmwidex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required. PWD-598 |
| 29 | Mild steel or iron work of small sizes and sections such as holding down bolts, holdfast tierods, gratings etc. (when not included in an over all rates) wroughtto required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of workfabrication of grill (PWD 502A) |
| 30 | Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt, dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. (PWD-641+642) |
| 31 | REPAIRING OF BOUNDARY WALL WITH MS GRILL Brick work in super structure in 1:6 super-structureabove plinth levelup to floor two level (up to two storeys) including necessary cutting and moulding of brick work as required andalsoincludinghoney combed brick work in thickness of wall more than 12cms. (PWD- 303+(305a-305)+309+310) |
| 32 | 12 mm cement plaster in single coat on rough side of single or halfbrick wall for exterior plastering up to floor two levelincluding internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. With water proofing material. 1 cement :6 coarse sand(PWD-13.12d+.015*250.00) |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R.-13.80*0.8681 |
| 34 | Finishing walls with Premium Acrylic Smooth / Metalic Paint paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) D.S.R.-13.47.1*0.8681 |
| 35 | Making grooves 10 to 12mmwidex 8mm deep in plaster of the wallor in ceiling vertically or horizontally as required. PWD-598 |
| 36 | Mild steel or iron work of small sizes and sections such as holding down bolts, holdfast tierods, gratings etc. (when not included in an over all rates) wroughtto required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of workfabrication of grill (PWD 502A) |
| 37 | Finishing walls with Premium Acrylic Smooth / Metalic Paint paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) D.S.R.-13.47.1*0.8681 |
| 38 | DRAIN Exacavation in ordinary soil(Loam caly or sand) including lift upto 1.5m and lead upto 30mtr. Including filling,watering and ramming of excavated earth into the trenches of into the space between the building and the sides of the structure and removal & disposal of surplus earth as directed by the Engineer incharge upto a distance of 30m from the structures.Excluding GST PWD SoR (SI. No. 251/2022) |
| 39 | Sand filling with local sand including supply of all labour, material and T&P etc. required for proper completion of the work.(DAR 18.41.1A)Rate Analysis |
| 40 | Concrete with 40mmgauge approved stone ballast coarse sandand cement in proportion of 8:4:1 including supply of all material, labour, tools & plant etc. required for proper completion of work(SoR 281/2022) |
| 41 | M.S. (tor steel or plain ) in plain work such asa RCC or RB work including bending for proper shape and including supply of steel & its wastage bend, hooks and authorised overlapping shall be measured and including cost of binding wire. Excluding GST (DSR Base-2021) Rate 89.65X0.8681=77.83 1008 X 0.785 X 1%=791.28 |
| 42 | R.C.C work with cement approved coarse sand and 20mm gauge approved stone grit in proportions of 1:1.5:3Slab Work excluding supply of reinforcement and its bending but including its fixing and binding the same with 24BWG G.I binding wire and including necessary centering and shuttering etc., and supply of all materials, labour, T&P etc required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. Excluding GST SOR-PWD-287A/2022 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
