|
| 1 | PART- A (OUT VILLAGE WORKS) |
| 2 | Survey and site selection for source, design, drawing, testing of SBC, hydrological, geological survey and construction of water tight circular R.C.C. Dry Intake well cum pump house producing 2 MLD (16 hours) raw water including supply of all material, labour, T&P etc. required for proper completion,functioning of work considering all the safety( stability) measures of structure . Inner diameter of well shall be 6.0 metre, height of well is approximately 27.00 metre( above GL and deck slab below pump house floor, total height 32 Mt Intake well plus 4 Mt pump house above deck slab) including,balcony with railing,M. S. girder ,inlets pipe with stainners as required,doors and windows, pump foundations,The rates should be inclusive of coffer dam, all excavation required for well and dewatering etc. For any increase / decrease in the heights /dia of well) including all labour materialT&P or as directed by Engineer in Charge. |
| 3 | Rate for increase/decrease in the height ofIntake well for every1.0 metre . |
| 4 | Rate for increase/decrease in diameter of Intake well for every1.0 metre dia. |
| 5 | Supply and fixing of the following fitting including cartage of materials labour T&P etc. complete.C.S Non Return valves (30 Kg/cm2)150 mm |
| 6 | Construction of steel girder approach bridge of 2.0 m. wide and required length as per site condition with emamel painting is also to be constructed to reach over the well/pump house, including cost & cartage of all material, labour and T&P etc required for proper completion of work or as directed by Engineer in Charge. |
| 7 | Rate for increase/decrease in the length of approach bridge. |
| 8 | WATER TREATMENT PLANT Survey, hydraullic / structural design, drawing, testing of SBC, geological survey, sitedevelopment, construction of water tight R.C.C. 2.00 MLD(16 hours)Capcity rapid gravity treatment plant consisting ofinlet chamber, pre sedimentation tank,mixing unit, floculation unit, chemical house, hopper bottom settling tanks ( tube settler), rapid sand filter of two equal units 1.00 mld each and connecting clear water chamber to the inlet of existing sump , alum doser andback wash arrangements with allappurtinent works. Including supply and fixing pipefor proper drainage arrangement upto out side the WTP campus, MSERWpipes for connecting the units, electrification and lighting arrangement inside and outside of operating plateform with railing and complete finishing of filter unit as required or as directed by Engineer in Charge. Including supply of all material, labour, T&P etc. required for proper completion and functioning of WTP. |
| 9 | Provision for boundry wall or such other work all round the stations for preventing approach of unauthorised souls. At IPS lachmoli |
| 10 | Provision to lay PCC (1:4:8) with cement sand and 40 mm gauge stone ballast in foundation including all material labour T&P etc |
| 11 | R.R. Stone Masonary in cement and Local sand or bajri(1:6) |
| 12 | MSERW RISING MAIN PIPELINE WORK Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. For pipe line in following strata including supply of labour, T&P. etc complete. Assuming that 90% pipe line is laid in trenches. Excavation in soil mix bajri. |
| 13 | Excavation in medium rock. |
| 14 | Confirmatory survey, design,Providing of all materials Supply, Carting,laying and jointing with welding of following sizes MSERW YST-210pipe at site of work, JOINTING BY ELECTRIC WELDING PROCESS with proper grade of electrodes suitable for jointing of water pipelines(The contractor have to survey the site, take levels with total station, measure the length of pipe with metallic tape on prescribed alignment. On completion of work the laid length of pipe will be deemed eligible for supply. The respective amount for quantity of surplus supply of pipes (which remained unlaid or unutilized) will be deducted from final bill and surplus quantity of pipes will be the property of contractor.)150 mm dia 4.80 mm tkick |
| 15 | Supply of sluice valves including cartage of materials labour T&P etc. complete at site of work as per engineering norms Sluice valve150 mm dia PN 1.6 |
| 16 | C.I. D/F SLUICE VALVE PN 1.0 150 mm DiaSluice valve 150 mm dia |
| 17 | Installation, testing and commisioning of sluice valveat site of work as per engineering normsC.I. D/F SLUICE VALVE PN 1.0 150 mm Dia |
| 18 | Supply of Air valves as per engg. Norms with bolts,nuts, rubber insertions etc including cartage of materials labour T&P etc. complete at site of work as per engineering normsC.I. AIR VALVE DOUBLE ACTING 65 mm Dia |
| 19 | Installation, testing and commisioning of Air valveat site of work as per engineering normsAir valve65 mm Dia |
| 20 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 21 | ELECTRICAL AND MECHANICAL (E & M) WORKS |
| 22 | SITC of following pumping plants at Intake well / Raw water pumping stationSupply, Installation, Testing and Commissioning Of Following Pumping Plant with Acessories. |
| 23 | Electric driven horizontal multi stage centrifugal Raw water pump capable of delivering 1500 lpm dischargeagainst a total head of 160 mt complete withbase frame, coupling and coupling guards (1490 rpm ). |
| 24 | 75 kW Electric motor squirrel cage,TEFC type, 1450rpm suitable to operate on 415+/- 10% volts, 3 phases 50 c\sAC supply. |
| 25 | 75 kWfully automatic air cooled auto transformer starter suitable to control above motor with over load and under voltage protections. |
| 26 | MS sheet steel fabricated dust and vermin proof cubical type floor mounting control panel (incoming 1 no consisting of 500 Amps MCCB complete with protections - 1 No.,0-500 Amps Ammeters 144 mm dial complete with CTs and selector switch -1 No., 0-500 volts voltmeters 144 mm dial with selector switch -1 No., 100 mm dia Frequency meter - 1 No., 100 mm dial PF meter - 1 No., Phase indicating lamps complete with instrument, fuses and toggle switch - 1 Set., On\off indicator - 1 Set.,KWH meter - 1 No., IDMT relay -1 No., Danger Plate - 1 No., Outgoing 2 no. consisting of 400 Amps MCCB complete with protections - 1 No 0-200 Amps.Ammeters 144 mm dial complete with CTs and selector switch -1 No,0-500 volts voltmeters 144 mm dial with selector switch - 1 No LT power capacitors of suitable rating-1 set Single phasing preventor - 1 No.Earth Fault Relay - 1 No., Hour Counter Meter - 1 No., Indicating Lamp - 3 Nos., 32 Amps MCB-3 No.)made out of 14/16 SWG MS sheet copper bus bar complete including cost of fabrication, cost of other equipments etc |
| 27 | Power wiring and earthing material.Complete power wiring to carry out wiring from Transformer to pump house control panel to starters to motors as below120 mm2 size 3.5 core aluminium conductor armoured/unarmoured XLPE sheathed cable of 1.1 KV grade. |
| 28 | 50 mm2 ,PVC insulated 3 core Flat submersible Copper cable. |
| 29 | Jointing material |
| 30 | Earthing with GI earth plate 600 mm x 600 mm x 6 mm including accessories, and providing masonry enclosure with providing and fixing of 25 mm x 5 mm GI strip on surface or in recess for connections with charcoal, salt as required. |
| 31 | Main piping and valvesSUCTION SIDE cast steel sluice valve 200 mm size of class 150 ASA-2 nos |
| 32 | DELIVERY SIDE Cast steel sluice valve 150 mm size of class 150 ASA |
| 33 | DELIVERY SIDECast steel reflux valve 150 mm size of class150 ASA |
| 34 | By-Pass Arrangement 200 mm dia cast steel D/F Sluice valve with hand wheel -150 ASA |
| 35 | 200 mm dia cast steel D/F Reflux valve -150 ASA |
| 36 | Pipes and specials |
| 37 | Guages (each set consist following items) :- Pressure guage with control cock and fittings of range 0 - 20 kg/cm2 - 1 No. Compound guage with control cock and fittings of range 0 - (+/-) 1 kg/cm2 -1 No.Heavy duty brass control cock, MS nipple,pipe,elbow etc. |
| 38 | Tools such as spanner set, pliers, hammers, screw drivers, bearing pullers etc. required for maintenance of pumping plants. |
| 39 | Rubber resistance sheet size 1 m x 2 m x 0.025m. |
| 40 | 3 Tonne capacity, 25 m lift chain pully block with travelling arrangementas required. |
| 41 | Testing of pumping plants at works |
| 42 | S.I.T.C. of following Items and Customization of Software & Integration with the existing SCADA Station GSM BASED REMOTE TERMINAL UNITS WITH Analog and Digital Parameter and features as specified to store and transmit data on GSM backbone to LMS(RTUs shells be integrated with the starter Panel) |
| 43 | GSM based wireless communication hardware for RTUs capable to transfer data from remote site to MCS/LMS with all accessories. |
| 44 | Electromagnetic insertion type flow meters for line sizes 150 mm with local electronics(display and set point facility) and 4-20mA retransmission output to SCADA |
| 45 | Energy meters suitable for automation |
| 46 | Valve autuator for 150 mm dia valve |
| 47 | Actuator Panels |
| 48 | Hard wired timer circuit for actuators |
| 49 | Pressure transmitter |
| 50 | Isolation Transformer (440 V step down 220 V for protection of site automation) |
| 51 | Over voltage & under voltage trip protection (350 V- 450 V) |
| 52 | Level transmitter of 10 mt range |
| 53 | Cabling Work Single cabling between RTU and field instruments, 2 Core x 1.5 PVC coated flexible screened cable |
| 54 | 4 Core x 2.5 sq mm Cu Power cable |
| 55 | 4C x 1.5 sq mm PVC coated flexible unscreened Cu cable |
| 56 | 10C x 1.5 sq mm PVC coated flexible unscreened Cu cable |
| 57 | Conduit pipe 1\" PVC |
| 58 | Conduit pipe 1.5\" PVC |
| 59 | Accessories like conduct pipe flexible pipes, PVCbend, AC & DC relays with base, lugs etc. |
| 60 | Customization of software & Integration with existing SCADA Station |
| 61 | SITC OF TRANSFORMER AND OTHER RELATED ELECTRICAL ITEMS SITC of supply of outdoor type 250 KVA transformer , 3 phase, 50Hz , oil conductor transformer having a no voltage ration 11/.433 Level -2 |
| 62 | Supply & fixing of 11 kv HT outdoor Heat shrinkable termination kit |
| 63 | Supply & fixing of 11 kv HT indoor Heat shrinkable termination kit |
| 64 | Supply & laying of 70 sq mm 3 core, 11 kv, HT XLPE AI, armoured cable |
| 65 | STABILIZATION OF SYSTEMOperation and maintenance and monitoring of LCSCost for 6 month( a&b) |
| 66 | INTERNAL ELECTRIFICATION OF PUMP HOUSEWiring for light point, fan point etc. with 1.5 sq mm FR PVC insulated copper conductor single core cablein surface PVC conduit with piano type switch, phenolic laminated sheet, suitable size GI box, with earth wire of 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required. |
| 67 | Wiring for circuit/submain alongwith earth wire with the following size of FR PVC insulated copper conductor single core cablein surface PVC conduit as required. 2x2.5 sq. mm + 1x2.5 sq. mm earth wire |
| 68 | 2x4 sq. mm + 1x4 sq. mm earth wire |
| 69 | Supply and fixing of metal box of 180 mmx100mmx160 mm deep on surface with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15x16 amp socket outlet and 15/16 amp piano type switch, connections, painting etc as required. |
| 70 | Supply and fixing of following 8 Way double door S.P.N. sheet steel, MCB DB, 240 V on surface complete with copper bus bar, neutral bus bar, earth bar, inter connections including earthing etc as required. (But without MCB/ RCCB/Isolator) |
| 71 | Supply and fixing of 5 A to 32 A, 240 V, 10 KA, C serious MCB suitable for inductive load of following pole in the existing MCB DB complete with connection, testing etc as required. |
| 72 | Supply and fixing of double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required. |
| 73 | Supply and fixing of 20 W LED tubelight complete in all respect (Bajaj / Philips / Equivalent make) |
| 74 | Supply in fixing of LED external lighting luminaires with mounting bracket etc. complete. |
| 75 | PART- B ( IN VILLAGE WORKS ) |
| 76 | GRAVITY MAIN PIPELINE WORKS (FOR LUSIYAR GAON, KANCHANPURI(BHALDGAON)&KATAL) Excavation of earth for pipeline in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assumingthat 90% pipe line is laid in trenches, it is estimated that 75% excavation will be in soilmixed with shingle, bajari and boulders and rest 25% will be in medium rock Soil mixed with boulder (SMB) |
| 77 | Medium Rock (MR) |
| 78 | Providing of all materials,Carting from site store to site of work,Laying & jointing of GI (M) screwed pipes(including supply of all jointing materials, white lead, hemp and oil etc) in trenches withits cutting, threading and testing of pipe line etc complete. GI PIPE 65 mm |
| 79 | 50 mm |
| 80 | 32 mm |
| 81 | 25 mm |
| 82 | Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. complete Wheel Valve 65 mm dia |
| 83 | 32 mm dia |
| 84 | CONSTRUCTION OF 200KL CLEAR WATER RESERVOIR AT BHAGDAUDIKHAL(HISRIYAKHAL)Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing,filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.The Cost of CWRs of corresponding capacities has been given in Rupees. Construction of new RCC circular service reservoirs 200.00 KL |
| 85 | Protection work as per actualRR Stone Masonry 1:6 including supply of all materials, labour, T&P etc. complete |
| 86 | INSIDE VILLAGE WORKS-DISTRIBUTION WORKProviding of all materials,Carting from site store to site of work,Laying & jointing of GI (M) screwed pipes(including supply of all jointing materials, white lead, hemp and oil etc) in trenches withits cutting, threading and testing of pipe line etc complete. G I PIPE(M) 15mm dia |
| 87 | 20mm dia |
| 88 | 25mm dia |
| 89 | 32mm dia |
| 90 | 40mm dia |
| 91 | 50mm dia |
| 92 | 65mm dia |
| 93 | 80mm dia |
| 94 | Excavation of earth for pipeline in following strata lift upto 1.5 m lead upto 30 m including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60 m from trenches including supply of labour, T & P etc.all complete assumingthat 90% pipe line is laid in trenches, it is estimated that 75% excavation will be in soilmixed with shingle, bajari and boulders and rest 25% will be in medium rock Soil mixed with boulder (SMB) |
| 95 | Medium Rock (MR) |
| 96 | Supply and fixing of the following fittings including cartage of materials, labour, T&P etc. completeWheel Valve 20 mm dia |
| 97 | 25mm dia |
| 98 | 32mm dia |
| 99 | 40mm dia |
| 100 | 50mm dia |
| 101 | 65mm dia |
| 102 | 80mm dia |
| 103 | CP BRASS BIB COCK Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :For 48 Village |
| 104 | Providing and supplying C.I. mouth, brass ferrule 15 mm diaFor 48 Village |
| 105 | Ferrul ConnectionMaking ferrule connection in the existing main of G.I, fittings and fixing of G.M. ferrule including tapping the main, but excluding the cost of earth work and cost of all materials. For 48 Village |
| 106 | Construction valve chamber Construction of wheel valve chamber (0.60x0.60x0.60) cm |
| 107 | R.C.C CLEAR WATER RESERVOIR Supply of all materials, labour, T&P etc and construction of R.C.C. CWR of following capacities ( in kiloliters ) with M.S. ladder outside & inside of the tank, M.S. M.H. cover with locking arrangement, supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover etc. complete with approved water proofing (apex) / enamal paint, testing,filling water for testing purpose etc. including supply of vertical pipes and specials, assuming bearing capacity as 8MT/M2.The Cost of CWRs of corresponding capacities has been given in Rupees.Construction of new RCC circular service reservoirs 3.00 KL |
| 108 | Construction of new RCC circular service reservoirs 5.00 KL |
| 109 | Construction of new RCC circular service reservoirs 7.50 KL |
| 110 | Construction of new RCC circular service reservoirs 10.00 KL |
| 111 | Construction of new RCC circular service reservoirs 12.50 KL |
| 112 | Construction of new RCC circular service reservoirs 15.0 KL |
| 113 | Construction of new RCC circular service reservoirs 17.50 KL |
| 114 | Protection work as per actual RR Stone Masonry 1:6 including supply of all materials, labour, T&P etc. complete |
| 115 | S.I.T.C. OF BULK WATER FLOW METERS AS PER ENGINEERING NORMSWOLTMAN BULK WATER METER 25 mm |
| 116 | 32 mm |
| 117 | 40 mm |
| 118 | 50 mm |
| 119 | 65 mm |
| 120 | 80 mm |
| 121 | WATER METER BOX POLYPROPELENE WATER METER BOX BLACK393 X 178 X 160 |
