Road And Building Department-RBD has published Tender For Construction Of Civil Infrastructure For Installation Of Biomedical Waste Management Equipment At Chc, Bamparda Under Barkote Block In The District Of Deogarh For The Year 2023-24.. Submission Date for this Tender is 20-07-2023. Infrastructure Work Tenders in deogarh Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in all kind of soil within 50 m initial loead and initieal lift, including dressing and levelling the bed etc. complete |
| 2 | Supplying and filling foundation and plinth with sand wall watered and rammed with cost conveyance and royality, taxes of all materials and labour (T&P) etc. complete. |
| 3 | Cement Concrete (1:3:6) in Foundation using 4 cm size bhg metal including watering, curing with cost, conveyance, royalty and taxes of all materials and cost of all labour (T&P) etc. complete as per the direction of Engineer-in-Charge. |
| 4 | Brick work with Fly Ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 5 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete as per the direction of Engineer-in-charge. |
| 6 | Plinth Bend |
| 7 | Column in Superstructure |
| 8 | Window Sill |
| 9 | Lintel Bend |
| 10 | Chajja |
| 11 | Wall Beam |
| 12 | Roof Slab |
| 13 | Brick work with Fly ash Brick having crushing strength not less than75 kg/cm2in cement mortar 1:6 in superstructure including cost conveyance royality and taxes etc.complete. |
| 14 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.( OUT SIDE Plaster) |
| 15 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 16 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. |
| 17 | Dressed seasoned sal wood work framed and fixed (W & P) in frame of doors, windows and door etc.Data for 0.028 Cum |
| 18 | Providing fitting & fixing Plywood Flush door shutter complete |
| 19 | Providing and fixing Iron Window Shutters with Angle Iron Frames and Grill including all |
| 20 | Providing and fixing Iron Door Shutters with Angle Iron Frames including all |
| 21 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete. |
| 22 | FixingVetrified tiles in floors,treads and landings on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 23 | Finishing wall surface with Distempering two coats with any approved shade over a coat of primer including all charges |
| 24 | Finishing wall surface with two coats of approved quality of weather seal coatof approved shade over a coat of primer including cost of all materials etc.complete. |
| 25 | Painting two coats Door/Windowwithapproved paint over a coat of primerIncluding cost of all materials etc. complete. |
| 26 | Providing and fixing ring for sharp pit and deep burial pit etc including transportation cost complete. (As per market price) |
| 27 | Providing and Fixing RCC Cover and ring for shart pit and deep burial pit etc including transportation cost complete. (As per Market Price) |
| 28 | E.I Part Recessed wiring to light point / fan/Call Bell and Exhaust fan point with 1.5 sq.mm FR PVC insulated Single copper multistand copper conductor of ISI marked with 50mm dia non-metalic 20mm dia non metalic PVC flexible conduit with 5/6 250 volt piano type switch, ceiling rose mounted on MS box having front bakelite cover of suitable size M.S. box with 1.5sqmm FR PVC insulated SC multistand copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-charge (Make of wire Finolex/ Anchor / Havells /HPL /L&T /V.Guard) a) Group A |
| 29 | b) Group B |
| 30 | c) Group C |
| 31 | Recessedwiring to 5/6amp socket switch with 2 x 1.5sqmm FR PVC insulated S/C MS copper wire of ISI marked in 20mm dia PVC flexible conduit and earthing point 1 x 1.5sqmm S/C MS copper wire as required b) On Existing Board |
| 32 | Surface wiring to sub-main wire along with wire earth wire PVC insulated S/C MS copper wire in 20mm dia PVC flexible conduit. a) 2 x 1.5sqmm |
| 33 | b) 2 x 2.5sqmm |
| 34 | c) 2 x 4.0sqmm |
| 35 | S/f of 4 Way MCB Box with 4 nos SP MCB (Legrand) |
| 36 | S/F of 63amp TPN Main Switch.(Heavy Duty) |
| 37 | S/F of 63amp TPN Busbar.(Heavy Duty) |
| 38 | S/F ofK. Angle Holder ISI marked including connection. |
| 39 | s/F OF 9 Watt LED Bulb |
| 40 | S/F of 1 x 20w Led Tube light |
| 41 | S/F of Earhing with G.I. Pipe 3 mtr. 40mm dia ISI marked as per Govt. Specification. |
| 42 | S/F 9" of Exhaust Fan. |
| 43 | Supplying of 16sqmm 3 1/2 core Allmn. Armd. Cable (Make nicco / Havells / Polycab) |
| 44 | S/F of 48" Sweep Ceilling fan (Make Usha Allune/Bajaj eliglenue / /CG high bnize) |
| 45 | S/F of Electronic Fan Regulator. |
| 46 | S/F Laying of cable on surface |
| 47 | S/f of 45 watt LEDstreet light ( CG/Havells/ Philips) |
| 48 | s/f of 32Amp TPN MCB Box (Havells/ Legrand) |
| 49 | PH Part Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 25mm dia PVC ASTM pipe (sch-80) Ground floor |
| 50 | 32mm dia PVC ASTM pipe (sch-80) roof of Firstfloor |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25mm diaC-PVC Pipes (sch-80) Ground floor |
| 52 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 53 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 54 | 25mm dia brassfull way valve (Shakti make) |
| 55 | 15mm CP Extension piece |
| 56 | 125mm CP grating |
| 57 | 15mm size C.P. flange |
| 58 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge 1000 liters capacityPVC water storage tank (Syntex three leyer white) |
| 59 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. Ground floor |
| 60 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge Ground floor |
| 61 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. Ground floor |
| 62 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 63 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 64 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 65 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 66 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 67 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with PEDESTRAL |
| 68 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 69 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 70 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
