Uttar Pradesh Industrial Development Corporation Limited has published Tender For Up-Gradation And Annual Maintenance Contract Of Electrical System Of Street Light Under Atal Industrial Infrastructure Mission At I.A. Bijauli And G.C. Jhansi. Submission Date for this Tender is 17-07-2023. Street Lighting Tenders in jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | (Upgradation)Supply & Fixing of LED street light fittings having die cast aluminium body and diffuser with driver set suitable for 90 Watt LED light confirming to IP 66 and above protection complete in all respect as per UPPWD Sch. No. 1423 CAT- AA (Philips, Crompton, Bajaj, Wipro make) |
| 2 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. |
| 3 | Supplying and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. as per PWD Sch. No. 501(i) 16 sq.mm 4 core (Polycab, Havells, Gloster, Granlay make) |
| 4 | Supply & laying 16 sq mm 2 core Al. conductor PVC insulated armoured, served, sheated cable 1100 V grade in existing HDPE pipe laid below ground level. The armouring of the cable shall be properly connected with earth conductor by clamp etc. as per PWD Sch. 501(c) & 507 (Polycab / Havells/ Grandle/gloster Make) |
| 5 | Supply & Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect. |
| 6 | S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contactors HRC fuses, isolating switch metering instrument box with CTS etc. (40 Amp. TPN) as per PWD Sch. No. 807 F |
| 7 | S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing as per UPPWD Sch. No. 701 |
| 8 | Painting of ST pole and all mountings on it with two coats of aluminium paints with an under coat of red oxide paint on length of above 10 M. support above the ground level as per direction of Engineer in-charge of work/site including T&P, men & material required for proper completion of work as per SIDC Sch. No. 20.2(B) |
| 9 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-inchargeas per UPPWD Sch. No. 504 (d) 16 sq.mm |
| 10 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (i)16 sq.mm 4 core |
| 11 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (c)16 sq.mm 2 core |
| 12 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-inchargeas per UPPWD Sch. No. 504 (f) 35 sq.mm |
| 13 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (k) 35 sq.mm 3.5 core |
| 14 | Supply and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects as per UPPWD Sch. No. 501 (k)(35 sq.mm 3.5 core)(Polycab, Havells, Gloster, Grandlay make) |
| 15 | Supply & fixing of 100 mm dia G.I.pipes "B" class for climbing up the cable from ground to over head line including all accessories, material, labours and T&P required for proper completion of work as per specification as per SIDC Sch. No. 25.1 |
| 16 | Supply & Fixing of 25 x 3 mm GI strip from earth electrode directly in the ground as required complete in all respect.(PWD Sch. No. 716) |
| 17 | Supply, sagging, jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect. SIDC Sch No. 10 (For LT Line 3 Phase) |
| 18 | S/B of 600x600x6mm G.I. plate vertically for earthing with its top at least 3 M. below ground level complete with 20 mm dia G.I.pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15 mm dia G.I.pipe up to switch board (From appron to switch board the cost of G.I.pipe and G.I. wire be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcole /Coke and salt at least 150mm thick around etc. as per directions of Engineer-in-charge complete in all respect as per as per drawing as per UPPWD Sch. No. 702 |
| 19 | Supply & Fixing of Straight MS Channel 100x50 mm (7.9 Kg. per Mtr.) 2.24 Mtr. long complete in all respect |
| 20 | Supply, installation, testing & commissioning of outdoor type Aluminium wound oil cooled transformer of rating 63 KVA, 11/0.433 KV 3 Phase complete as per IS-1180-2014 Level-I. |
| 21 | Supply & Fixingof 11 KV TPMO switch complete in all respect as per UPSIDA as per SIDC Sch. No.28.01 |
| 22 | Supply & Fixing of11 KV DO fuse set complete in all respect as per SIDC Sch. No.29.01 |
| 23 | Supply & Fixing of 50x6 mm MS flat clamp suitable for securing the MS Channelas per SIDC Sch. No.3.4 |
| 24 | Supply & Fixing of L.T. ordinary pole fitting single phase 3 wire for street light mains in vertical configuration of supply &fixing of G.I. Shackle strips 250x50x3 mm 2 pairs with 18 mm dia holes SIDC.Sch No.15.03 |
| 25 | Supply & Fixing of L.T. ordinary pole fitting for single circuit 3 phase 6wire linein vertical configuration consisting of two numbers 50x6 mm clamp of MS flat with two number 100x115 mm shackle insulator and one number 50x6 mm ms clamp for earth wirecomplete as per sidc sch. no. 13.4 |
| 26 | Repairing & Re-grouting of Steel tubular pole 410 -SP.55 ,11 mtr long with 4 angles 100x100x06 mm Length 900 mmwith welding and 30 cm dia cement concrete plingth all arround the pole ground level complete in all respect |
| 27 | Supply and fixing of 32 mm dia 1.20 mtr long GI pipe bracket including bend pipe 02 nos 50x6 mm M.S clamp complete in all respect |
| 28 | Supply and wiring of submain with two nos.of 2.5 sq mm .FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by engineer in charge complete in all respect |
| 29 | Supply & Fixing of factory wired integral LED floodlight luminaries with die cast aluminium housing built with driver set suitable for 200 watt confirming to IP 66 protection complete in all respect as per UPPWD Sch. No. 1455Cat.-AA (Philips/Cromption/Bajaj /Wipro make) complete in all respect |
| 30 | Supply & Fixing of factory wired integral LED floodlight luminaries with die cast aluminium housing built with driver set suitable for 150 watt confirming to IP 66 protection complete in all respect as per UPPWD Sch. No. 1454Cat.-AA (Philips/Cromption/Bajaj /Wipro make) |
| 31 | S/F of wiring Cable(3Cx1.5 Sq.mm copper wire) for High Mast lighting system complete including all T&P men and material required for proper completion of work complete in all respect |
| 32 | (AMC) Supplying and laying of aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. as per PWD Sch. No. 501(j) 25 sq.mm 3.5 core |
| 33 | S/F of 16 Sq.mm, 2 core PVC insulated PVC sheathed armoured 1100 V grade Al. conductor cable laid to depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects as per PWD Sch. No. 501 © |
| 34 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (c)16 sq.mm 2 core |
| 35 | S/F of brass nickel plated compression gland for PVC insulated and armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in charge as per UPPWD Sch. No. 503 (j) 25 sq.mm 3.5 core |
| 36 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-in charge as per UPPWD Sch. No. 504 (d) 16 sq.mm |
| 37 | S/F of palm or pin type copper tin plated cable socket (lug) to the cable leads insulating with tap and making connection etc. complete in all respects as per direction of the Engineer-in charge as per UPPWD Sch. No. 504 (e) 25 sq.mm |
| 38 | Supply & wiring of submain with 2 Nos. of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed as site by Engineer I/C as per UPPWD Sch. No.289 |
| 39 | S/F of wiring Cable (3Cx1.5 Sq.mm copper wire) for High Mast lighting system complete including all T&P men and material required for proper completion of work complete in all respect |
| 40 | Supplying and wiring of 4 sq. mm aluminium conductor PVC insulated unsheathed single core cable including all T&P men and material for proper completion of work complete in all respect |
| 41 | Supply, sagging, jointing and binding of insulated ACSR Weasel conductor including cost of aluminium tape binding and jointing sleaves etc. complete in all respect |
| 42 | Supply & fixing of D clamp of size 50x6 mm flat iron on ST poles with nuts and washers etc. complete in all respect as per UPPWD Sch. No. 623 |
| 43 | Supply & fixing of 100 x 110 mm shackle insulator 100 x 80 mm pin insulator including GI volt spindle,nuts etc. as pre UPPWD Sch. No. 621 |
| 44 | Supply & Fixing of 32 Amp 415 V metal clad TPN rewireable type switch fuse unit on angle iron bracket complete in all respects |
| 45 | S/F ofML-4 contactor MDS/L&T make complete including all T&P men and material required for proper completion of work complete in all respect |
| 46 | Supply & Fixing of 63 Amp 4 pole MCB complete in all respects as per UPPWD Schedule No.1020(A) Cat-B |
| 47 | S/F of mounting time switch (timer Clock) L&T/MDS make complete including all T&P men and material required for proper completion of work complete in all respect |
| 48 | Lowring of 30/16/12.5 Mtr. High mast lighting system complete in T&P men & material required proper completion of work etc.complete in all respect |
| 49 | S/F of S.S. wire rope set for High Mast lighting system complete including all T&P men and material required for proper completion of work complete in all respect |
| 50 | S/F of Trailing Cable for High Mast lighting system complete including all T&P men and material required for proper completion of work complete in all respect |
| 51 | S/Oiling of winch machine for High Mast lighting system complete including all T&P men and material required for proper completion of work complete in all respect |
| 52 | S/F of Male-Female plug & socket for High Mast lighting system complete including all T&P men and material required for proper completion of work complete in all respect |
| 53 | Charges for maintenance,watch &ward of entire electrical system of road lighting to cover general supervision for execution of work during the period of AMC excluding the supply and fixing/installation of all materials. (03 Electrician & 03 Helper) as per HO Letter No. 615-19/SIDA/Estt. dt.01.07.2020 (IA Wise Man Power & Rate Details are enlosed) |
| 54 | Cost of all material, spares wire fuses, small accessories required for general maint., cleaning, oiling etc. to keep the entire installation in perfect working order during AMC period. (L.S. Basis) |
| 55 | Supply & fixing of driver suitable for (70 to 110 watt) LED street light fittings as per make installed at Site complete in all respect |
| 56 | Supply & fixing of MCPCB with LED & Lance (70 to 110 watt) for suitable installed LED street light fittings complete in all respect |
| 57 | Supply & Fixing of Glass suitable for installed(70 to 110 watt) LED street light fittings complete with rubber gasket etc. complete in all respect |
| 58 | Supply & fixing of LDR suitable for installed (70 to 110 watt) LED street light fittings complete in all respect |
| 59 | Supply & fixing of special protection device (SPD) suitable for (70 to 110 watt) LED street light fittings as per make installed at Site complete in all respect |
| 60 | S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contactors HRC fuses,isolating switch metering instrument box with CTS etc. (40 Amp. TPN) as per PWD Sch. No. 807(f) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
