Tender For Provn Of Boundary Wall With Concertina Coil For Security In Fma East Banbasa Under Ge Pithoragarh
Tender Value
95.15 Lakhs
Estimated cost
Bid Submission
08 Aug 2023
0 days left
EMD
1.67 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
banbasa → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Boundary Wall With Concertina Coil For Security In Fma East Banbasa Under Ge Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 3 | Removing excavated material n exc 50 m and depositing where directed at alevel n exc 1.5 m above the starting point complete all as specified and directed. |
| 4 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates as in foundation filling and mass concrete complete all as specified and directed. |
| 5 | M&L for mild steel TMT bars Gde- Fe500D 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conplete all as specified and directed. |
| 6 | M&L for mild steel TMT bars Gde- Fe500D 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conplete all as specified and directed. |
| 7 | M&L for mild steel TMT bars Gde- Fe500D 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conplete all as specified and directed. |
| 8 | M&L for formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed. |
| 9 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed. |
| 10 | M&L for reinforced cement concrete M25 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. and mass concrete complete all as specified and directed. |
| 11 | M&L for reinforced cement concrete M25 as columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 12 | M&L for reinforced cement concrete M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 13 | M&L for 10 mm thick rendering on fair faces of brick work and concrete surfaces in CM 1:3 finishing the surfaces even and fair to receive tiles/ granite/ kota stone complete all as specified and directed. |
| 14 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed. |
| 15 | M&L for 15 mm thick rendering on brick work or concrete surfaces in CM 1:4 finishing the surfaces even and fair complete all as specified and directed. |
| 16 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 17 | M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-410 Gde 250-A quality-A complete all as specified and directed. |
| 18 | M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 19 | S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured) |
| 20 | S&F of galvanised high tensile punched tape concertina coil of 600 mm dia with turns per coil and minimum 8kg weight and tensile strength of 1600N/mm², straining and fixing to any type of standard rails, straining bolts, including securing or tping at crossing with and provision of galvanised mild steel wire, straining bolts/ clips at ends, staples or steel pins etc. complete all as specified and directed. |
| 21 | S&F rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde-E-250) quality- A complete all as specified and directed. |
| 22 | M&L for preparation of new steel surfaceexceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 23 | S&F 75mm bore PVC (SWR) pipes in any length fixed into weep holes of boundary wall complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Jul 10, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender