Haryana Police Housing Corporation Limited has published Supply, Installation, Testing And Commissioning Of 40 Kva Dg Set In Police Station At Bass In Police District Hansi, Installing DG set, AMF Panel, LT Panel,High Mast, Shifting of Transformer, Installation of LED lights. Submission Date for this Tender is 01-08-2023. Diesel Generators Tenders in bhiwani Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | [10.100.1]Cement Concrete 1:8:16 Flooring 1. Cement Concrete 1:8:16 with Over burnt (Jhama) Brick Aggregate: 90 mm to 40 mm size in foundation and plinth. |
| 2 | [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) |
| 3 | [11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete |
| 4 | [11.67.1]Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 1. Water thinnable cement primer |
| 5 | [11.71.1]Wall painting on a cement plaster surface with acrylic emulsion paint of approved brand and manufacture to give an even shade : 1. Two or more coats on new work |
| 6 | [11.77]Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc. |
| 7 | [11.78]Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. |
| 8 | [12.50.1]Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 1. Fixed to steel windows by welding |
| 9 | [12.54]Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. |
| 10 | [20.76.9]Design, Supply and erection of transformer of standard make Required 25 KVA 11/0.433 KVA rating outdoor type 11 KVA V.C.B, panel, G.O. switch, H. Pole , H.T metering panel, APFC panel, battery charges, 11 KVA substation, entire cable network from G.O. switch to H.T metering equipment and from H.T metering to Transformer. From transformer to main to L.T, panel earthling, safety equipment, fenced enclosure for transformer, and any other contingent thereto complete in all respect as per approved make and directions of Engineer-in-charge as per respective capacity. 9. 250 KVA |
| 11 | [20.84]Providing and fixing of insulated rubber matting suitable for 11 KV installation 1 M x 2 M x 12 mm thick (IS code 15652-40091)as per specification complete and as per directions of Engineer-in-charge |
| 12 | [20.86]Supply, erection, testing and commissioning of G.O. Switch two poles, with blade, pin 6 insulators operating handle with GI pipe 25 mm class B complete in all respects. |
| 13 | [20.89.5]`Designing, Supply and erection ofDG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415plus (-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM. a) Diesel Engine b) Alternator c) Battery 24 V. d) Base Plate. e) suitable sq mm suitable core copper cable upto 40 metres. f) Tools, standard panel g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s) h) Metering set 60/5A/110V (Amp. Meter, Volt Meter) i) Overload protection for DC-1 No. j) Battery Charger 24V DC k)Copper bus bar of suitable size l) KWH meter 96 sqmm size m) Starting fuse button and key switch9on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge` 5. 62.5 KVA |
| 14 | [20.89.7]`Designing, Supply and erection ofDG set of capacity given below with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415plus (-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM. a) Diesel Engine b) Alternator c) Battery 24 V. d) Base Plate. e) suitable sq mm suitable core copper cable upto 40 metres. f) Tools, standard panel g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s) h) Metering set 60/5A/110V (Amp. Meter, Volt Meter) i) Overload protection for DC-1 No. j) Battery Charger 24V DC k)Copper bus bar of suitable size l) KWH meter 96 sqmm size m) Starting fuse button and key switch9on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge` 7. 125 KVA |
| 15 | [21.84.3]Constructing brick masonry inspection Chamber sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 per cent lime mortar 2:3 in foundation cement concrete 1:2:4 benching 12mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/cement concrete topping, 50mm thick with 455mmx455mm / 455mm x610mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint complete as per standard design. 3. Size 600 mm X900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with R.C.C. slab) |
| 16 | [22.164.2]Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 2. 150 mm diameter S.W. pipe |
| 17 | [23.22.1.10]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.10. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 125 to 160amp, 25 KA |
| 18 | [23.22.4.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 4.5. Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. TPN DBHorizontal type Double Door 4 way ( 8 incoming and 3phase*4 outgoing) |
| 19 | [23.22.5.1]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.1. Supply and erection of miniature circuit Breaker240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole |
| 20 | [23.22.5.8]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 5.8. Supply and erection of miniature circuit Breaker240/415 V in the existing distribution board including making necessary connections:- 40 amp to 63 amp. MCBs FOUR POLE |
| 21 | [23.24.4.3]MS STAND, BUS BAR CHAMBER AND PANELS 4.3. Supply, installation, testing and commissioning of load bank with digital meter module cost of digital Amp. / volt meter with selector switch wiring ( but EXLUDING COST of incoming and outgoing MCCBs ) etc.suitable for operation of 240/415 volts A.C. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in-Charge of work. Load Bank 4 way 400 amp. |
| 22 | [23.26.4]SAFETY ITEMS 4. Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entireSatisfaction engineer in charge of the work (size 6x4 made of GI pipe 32mm dia). |
| 23 | [23.27.1]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof .The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 1. M.S. pedestal of size 600 mm wide , 750 mm high ,300 mm deep and bottom totally open , duly embeded in 1:2:4 cement concrete block of size 750 mm x 450 mm x 200 mm above ground level , having a base of size 900 mm x 600 mm x 250 mm below ground level.0 0 |
| 24 | [23.27.6]Supply and erection of Godrej Almirah typeM.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof .The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- 6. M.S. pedestal of size 1500 mm wide , 1800 mm high ,450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1650 mm x 600 mm x 200 mm above ground level, having a base of size 1800 mm x 750 mm x 250 mm below ground level . 0 0 |
| 25 | [24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. |
| 26 | [24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. |
| 27 | [24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. |
| 28 | [24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. |
| 29 | [24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but withoutcharcoal or coke and salt) etc. complete as required. |
| 30 | [24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. |
| 31 | [24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. |
| 32 | [24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. |
| 33 | [24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. |
| 34 | [24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm |
| 35 | [24.4.10.4]STREET LIGHT 10.4. Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 8.0 metre and up to 11.0 metre |
| 36 | [24.4.15.3]STREET LIGHT 15.3. B.S.E.N. 10025 High Masts "Supply, installation, testing and commissioning of 20 mtr. long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 Part-3 suitable for 9/12 nos. luminaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufacturer with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bolts, installation at site complete in all respect upto entire satisfaction of Engineer -in-Charge Thickness of Top and Bottom Section = 3 mm & 4mm (minimum) Top Dia = 150 mm and Bottom Dia = 460mm Thickness of Galvanization - Top = 65 micron (minimum) andBottom = 85 micron (minimum)" |
| 37 | [24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia |
| 38 | [24.5.2.6]MISCELLANEOUS ITEMS 2.6. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia |
| 39 | [24.7.2]RCC FOUNDATIONS FOR DG SET 2. 60 to 90KVA DG Set |
| 40 | [24.9.3]RCC FOUNDATIONS FOR HIGH MAST OCTAGONAL POLES 3. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 75 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for high mast octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 20m high mast pole |
| 41 | [4.14.1]Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. All kinds of soil. |
| 42 | [6.1.1]Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1. 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 43 | [7.21.1]Brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 44 | [9.31]Providing and fixing Hi, Rib profiled sheets 0.60mm TT (Total Thickness) (only ± 0.2mm tolerance allowed) Hi Tensile galvalume/Zincalume steel sheet of the approved make having a hot dip metallic Zinc-Aluminium alloy (AZ-150) coating of minimum (150 gms/sqm) with 550 Mpa yield strength of approved blue colour (RAL-5012) the colour coating shall be as per IS 15965 of SMP or Super Durable Polyester Paint XRW fixed with hex head self-drilling screw sloping roof without curvature as per approved specification, drawing and design of the Corporation |
| 45 | Total E.I. HSR Part |
| 46 | NS Part Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. Size :- 150 Sq. mm 3.5 Core Cable |
| 47 | Providing and fixing fire extinguisher ISI marked complete in all respects. makeAs per HPHC brand List. a)CO2Type 4.5 kg ISI marked. |
| 48 | Dismantling and erection of old Transformer on new place with crane/Hydra and labour as required complete the job in all respect |
| 49 | S/E of XLPE (E) 11KV HT aluminium conductor armoured cable ISI mark laid in 1 meter below ground level with sand and bricks with all labour and material including digging and refilling of trench, required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work Size 50 sqmm 3 Core XLPE cable |
| 50 | Supply and erection of HT aluminium conductor Size 50 SQMM complete in all respect. |
| 51 | Supply and erection of lighting arrestor model SDU suitable for 11 KV. 3 phase, 50 cycle, per second grounded neutral system comprising of spark gap type quench gap in service with no linear resistor element housed in along with mountering clamps and confirming to ISS -3070(Part-1) of 1988 with latest amendment on existing channels with labour and material required to complete the job in all respect up to entire satisfaction of Engineer-in charge of the work |
| 52 | Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. Size :- 25 Sq. mm 4Core aluminium Armoured cable |
| 53 | .Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. Size :- 240 Sq. mm 3.5 Core aluminium Armoured cable |
| 54 | Supply and erection of LED flood light 200 watt white colour, pressure diecast, working hour minimum 35000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 55 | Supply and Erection of50 LtrRO Water purification system complete in all respect with all petty material required to complete the job upto entire satisfaction of the Engineer-in-charge. |
| 56 | Supply and Erection of water cooler of stainless steel body with 150 ltr storage and150 ltr/hour cooling capacity complete in all respect with all petty material required . |
| 57 | Supply and erection of Double Door Standard Deep Freezer capacity 500 ltr complete in all respect |
| 58 | Supply and erection of Double Door Standard Deep Freezer capacity 500 ltr complete in all respect( Make Bluestar/Samsung/Voltas) |
| 59 | S/E of 200W LED Floodlight luminaire with powder coated pressure die-cast aluminium housing, toughened glass and individual LEDs provided with secondary lens optics with IP66 protection, efficiency 120 lm/W, working hour minimum 50000 hours, operation on single phase AC supply complete in all respect upto the entire satisfaction of Engineer- in -charge of the work including making necessary connections etc. |
| 60 | Supply and erection of PARTICULARS ELECTRICAL SIREN 5 KM RANGE IN RADIUS WEIGHT APPROX 55 KG COPPER WIRING , DOUBLE ENDED Complete in all respect. Make- AFEX/Vishawakarma/Mahakal. |
| 61 | Supply, installation, testing and commissioning of 1.5 TR,5 star, Inverter type, Wall mount `Split Air-conditioning unit `, single phase consisting of condensing indoor unit, outdoor unit of copper coil, MS stand, copper wound digital stabilizer 4 KVA , 160V -270V , copper refrigrant piping and cabling between indoor and outdoor unitupto 3 meter etc., complete in all respecti/c making repair of wall,floor and roof in origional shape caused by making holes and chases etc. |
| 62 | Supply and Erection Testing and commissioning of Indoor type TTA- LT PANEL Confirmingto specifications for IEC/IS-61439-1and2, The Cubical Panel fabricated out of 2/1.6 mm thick CRCA sheet having with base frame made M.S sheet duly x with 7 TANK Pre-Treated for Sheet Cleaning than Powder Coated -RAL-7035 Shade with 70-80 Microns powder thickness.The TTA Panel as per IEC/IS -61439-1and2 . It should have Internal Arc Protection. It should have Modular Design with 3B formation. It should have SC-50 KA . It should comply all Type Tests as per IEC/IS-61439-1and2 complete in all respect. Incoming Feeder -2 No. 630A 4P EDO ACB 50KA With Microprocessor Based Release For {O/C, S/C and E/F with Current Metering } Protection, 4NO plus 4NC Aux. Contacts, Charging Motor230Vac, S/T Release-230Vac, Closing Coil-230Vac. ACB 2 Nos. Aux Trip ContactAUX 2 Nos. Under Voltage Coil 240VACUVR 2 Nos. Breaker Control Switch, 16A TNC 2 Nos. Digital VAF Meter, Class-1.0, 96X96 Sq mm METER 2 Nos CTs 600/5A, Class-1, {CMCT} For Metering CTs 6 Nos. Auxiliary Contactor 2NO plus 2NC Contacts, Aux. Supply - 230Vac Aux 4 Nos. Addon Block 2No plus 2NcAux 4 Nos. ON/OFF/TRIP Indicating Lamps (LED TYPE) IL 6 Nos. R/Y/B Phase Indicating Lamps (LED TYPE) IL 6 Nos. 6A, SP, MCB, 10KA For Control Ckt.MCB 14 Nos. 6A Neutral Link Dropout Type, For Control Ckt. NL 2 Nos. ` `Bus Coupler feeder-1 :-01Nos. 630A 4P EDO ACB 50KA With Microprocessor Based Release For {O/C, S/C and E/F with Current Metering } Protection, 4NO plus 4NC Aux. Contacts, Charging Motor230Vac, S/T Release-230Vac, Closing Coil-230Vac. ACB 1 Nos., Aux Trip ContactAUX 1 Nos. Under Voltage Coil 240VACUVR 1 Nos., Breaker Control Switch, 16A TNC 1 Nos. Auxiliary Contactor 2NO plus 2NC Contacts, Aux. Supply -230Vac Aux 2 Nos., Addon Block 2No plus 2NcAux 2 Nos. ON/OFF/TRIP Indicating Lamps (LED TYPE) IL 3 Nos. R/Y/B Phase Indicating Lamps (LED TYPE) IL 3 Nos. 6A, SP, MCB, 10KA For Control Ckt.MCB 7 Nos. 6A Neutral Link Dropout Type, For Control Ckt. NL 2 Nos. Outgoing Section -1 Outgoings feeder :- 01 Nos. 400A 3P plus NL MCCB 50KA With Thermal Magnetic Release For {O/C, S/C}ProtectionMCCB 1 Nos. Spreader TerminalSPDR 1 Nos. Extended Rotary HandleROH 1 Nos. Outgoings feeder :- 02 Nos. 200A 3P plus NL MCCB 25KA With Thermal Magnetic Release For {O/C, S/C}ProtectionMCCB 2 Nos. Spreader TerminalSPDR 2 Nos., Extended Rotary Handle ROH 2 Nos. ` `Outgoings feeder :- 02 Nos., 100A 3P plus NL MCCB 25KA With Thermal Magnetic Release, For {O/C, S/C}Protection MCCB 2 Nos., Spreader Terminal SPDR 2 Nos., Extended Rotary HandleROH 2 Nos. Outgoings feeder :- 01 Nos. 63A 3P plus NL MCCB 25KA With Thermal Magnetic Release, For {O/C, S/C}ProtectionMCCB 1 Nos., Spreader Terminal SPDR 1 Nos., Extended Rotary Handle ROH 1 Nos. Outgoing Section - 2 Outgoing feeder : 01 No of 300A 3P plus NL MCCB 50KA with Thermal Magnetic Release for (O/C and S/C) Protection, Spreader Terminal and extended rotary handle. Outgoing feeder : 02 No of 200A 3P plus NL MCCB 25 KA with Thermal Magnetic Release for (O/C and S/C) Protection, Spreader Terminal and extended rotary handleTerminal Handle ROH 3 Nos. Outgoings feeder :- 02 Nos., 100A 3P plus NL MCCB 25KA With Thermal Magnetic Release ,For {O/C, S/C}Protection MCCB 2 Nos., Spreader Terminal SPDR 2 Nos., Extended Rotary HandleROH 2 Nos. Outgoings feeder :- 01 Nos., 63A 3P plus NL MCCB 25KA With Thermal Magnetic Release, For {O/C, S/C}Protection MCCB 1 Nos., Spreader Terminal SPDR 1 Nos., Extended Rotary HandleROH 1 Nos. ` `BUSBAR - Main Bus Bar ,TPN Aluminum busbar made from Electrical Grade Aluminum flats (E-91-E) 600 AMP Duly supported ,on DMC insulators and covered with heat shrinkable sleeves. Enclosure, Bus Bar and Wiring and Accessories MS Cabinet with integrated Base Frame and Powder Coated Paint, Hardware and Accessories - Nuts, Bolts, Washers Door Hinges and Locks, Neoprene Rubber Gaskets. Mounting Plates, MS Channels, Partitions, Lifting Hooks and Gland Plates., PVC Wires, Ferrules Thimbles and Other Wiring Accessories. Consumables, Design and Development, Drawings Manufacturing Cost i.e. Fabrication, Painting, Bus Bar fitting, Handling and fitting of switchgears. |
| 63 | Supply, Erection, Testing and commissioning of Indoor type AMF PANEL Confirming specification for cubical panel fabricated out of 2/1.6 mm thick CRCA sheet having with base frame made M.S sheet duly x with 7 TANK Pre-Treated for Sheet Cleaning than Powder Coated -RAL-7035 Shade with 70-80 Microns powder thickness. AMF Panel with ATS (Auto Transfer Switch) ATS -250A with Protection Release MCCB 250A,FP 50 KA with Rotary Handle and Spreader Links at Common Output MF Meter with CTs-630/5 and Selector Switch Complete Set Bus Bar, Bus Bar Fittings, Handling and fitting of switchgears. R/Y/B/Phase indicating lamps (LED type) -6 nos. 6A,SP,MCB,10Ka for control Ckt. MCB 10 nos. 6A. Auxiliary contactor 2NO plus with thermostat reputed 1nos. Add on block 2NO plus 2NC Man Bus Bar Aluminum 630A With Engine Start Relay, Voltage Check Relay complete in all respect for AMF operation Auxiliary contactor 2NO plus 2NC with add on block 2NO plus 2NC aux supply 230V AC 2nos. Battery charger 240V-24vdc reputed charger 1nos. MCB 20A,DP 10Ka ‘C’ curve MCB 4 nos. Combined box 16A reputed C.B. 1nos. On delay timer reputed timer 3nos. auto/manual switch 1nos. panel light 1nos. |
| 64 | `Supply and Erection Testing and commissioning of Indoor type AMF PANEL confirming specification for cubical panel fabricated out of 2/1.6 mm thick CRCA sheet having with base frame made M.S sheet duly x with 7 TANK Pre-Treated for Sheet Cleaning than Powder Coated -RAL-7035 Shade with 70-80 Microns powder thickness . AMF Panel with ATS (Auto Transfer Switch) ATS -630A with Protection Release MCCB 630A,FP 50 KA with Rotary Handle and Spreader Links at Common Output MF Meter with CTs-630/5 and Selector Switch Complete Set Bus Bar, Bus Bar Fittings, Handling and fitting of switchgears. R/Y/B/Phase indicating lamps (LED type) -6 nos. 6A,SP,MCB,10Ka for control Ckt. MCB 10 nos. 6A. Auxiliary contactor 2NO plus with thermostat reputed 1nos. Add on block 2NO plus 2NC Man Bus Bar Aluminum 630A With Engine Start Relay, Voltage Check Relay complete in all respect for AMF operation Auxiliary contactor 2NO plus 2NC with add on block 2NO plus 2NC aux supply 230V AC 2nos. Battery charger 240V-24vdc reputed charger 1nos. MCB 20A,DP 10Ka ‘C’ curve MCB 4 nos. Combined box 16A reputed C.B. 1nos. On delay timer reputed timer 3nos. auto/manual switch 1nos. panel light 1nos.` |
| 65 | Supply and Erection Testing and commissioning of Indoor type APFCR PANEL-100 KVAR Confirming specification for cubical panel fabricated out of 2/1.6 mm thick CRCA sheet having with base frame made M.S sheet duly x with 7 TANK Pre-Treated for Sheet Cleaning than Powder Coated -RAL-7035 Shade with 70-80 Microns powder thickness Incoming feeder . :- 01 Nos. 250A 3P plus NL MCCB 25KA With Thermal Magnetic Release, For {O/C, S/C} Protection MCCB 1 Nos., Spreader Terminal SPDR 1 Nos. Extended Rotary Handle ROH 1 Nos., Ammeter Digital Built in ASS, Class-1.0, 96X96 Sqmm METER 1 Nos., Voltmeter Digital Built in VSS, Class-1.0, 96X96 Sqmm METER 1 Nos., CTs 200/5A, Class-1, {CMCT} For Metering CTs 3 Nos., Automatic Power Factor Controller 8 stage 3 C.T Dual Source, Microprocessor based 240VAC APFC 1 Nos., R/Y/B Phase Indicating Lamps (LED TYPE) IL 3 Nos., 6A, SP, MCB, 10KA For Control Ckt. MCB 4 Nos., 6A Neutral Link Dropout Type, For Control Ckt. NL 3 Nos. 5 KVAR Capacitor Banks :- 01 Nos, MCB 16A,TP 10KA `C` Curve MCB 1 Nos., 5 KVAR Capacitor Duty Contactor 240Vac Cont 1 Nos., Addon Block 1No plus NC Addon 1 Nos., Power Capacitor 5 Kvar MPP Standard Duty Type 440Vac Neptune Capacitor 1 Nos., ON/Off Indicating Lamps (LED TYPE) IL 2 Nos. Start Stop Push Button P.B 2 Nos.` `Auto Manual Selector switch A/M 1 Nos., 10 KVAR Capacitor Banks:- 02 Nos, MCB 32A,TP 10KA `C` Curve 2 Nos., 10 KVAR Capacitor Duty Contactor 240Vac Cont 2 Nos., Addon Block 1No plus NC 2 Nos., Power Capacitor 10 Kvar MPP Standard Duty Type 440Vac Capacitor 2 Nos., ON-Off Indicating Lamps (LED TYPE) IL 4 Nos., Start Stop Push Button P.B 4 Nos., Auto Manual Selector switch A/M 2 Nos., 25 KVAR Capacitor Banks :- 03 Nos MCB 63A,TP 10KA `C` Curve MCB 3 Nos., 25 KVAR Capacitor Duty Contactor 240Vac 3 Nos. Addon Block 1No plus NC 3 Nos., Power Capacitor 25 Kvar MPP Standard Duty Type 440Vac Capacitor 3 Nos., ON-Off Indicating Lamps (LED TYPE) IL 6 Nos., Start Stop Push Button P.B 6 Nos., Auto Manual Selector switch A/M 3 Nos., BUSBAR - Main Bus Bar, TPN Aluminum busbar made from Electrical Grade Aluminum flats (E-91-E) 200 AMP Duly supported on DMC insulators and covered with heat shrinkable sleeves. Enclosure, Bus Bar and Wiring and Accessories MS Cabinet with integrated Base Frame and Powder Coated Paint ,Hardware and Accessories - Nuts, Bolts, Washers Door Hinges and Locks, Neoprene Rubber Gaskets. Mounting Plates, MS Channels, Partitions, Lifting Hooks and Gland Plates. PVC Wires, Ferrules Thimbles and Other Wiring Accessories. Consumables, Design and Development, Drawings Manufacturing Cost i.e. Fabrication, Painting, Bus Bar fitting, Handling and fitting of switchgears. |
| 66 | Total E.I. NS Part |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
