Tender For Bids For Implementation Of Hybrid Etc System And On Boarding Of State Toll Plazas In Rajasthan Under Fastag Programme Of Ihmcl On The Roads Under Package No. 01, Jaipur-Rajasthan

Bids For Implementation Of Hybrid Etc System And On Boarding Of State Toll Plazas In Rajasthan Under Fastag Programme Of Ihmcl On The Roads Under Package No. 01 , Bsr Items ( Electrical ) , S&F Following Sizes ( Dia. ) Of Isi Marked Virgin Material Mms ( Is:9537 P - Iii ) Pvc Conduit Along Withisi Marked ( Is:3419-1988 ) Accessories As Requiredinrecessincludingcutting The Wall, Covering Conduit And Making Good The Same As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 25 Mm , Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked ( Is:694 ) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From99.90 % Purity Copper, Class 5 Stranding In Acc. To Is:8130 / Iec 60228 Forlower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A / C / D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, In Existingsurface Or Recessed Pvc / Ms Conduit / Casing Capping Making Connections With Copper Lugs Of Suitable Size, Ferrules, Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 3X 1.5 Sq.Mm , 2 X 2.5 Sq. Mm. + 1X1.5Sqmm , 1 X 6.0 Sq.Mm , Providing & Fixing Of 240 / 415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity ( B / C / D Tripping Characteristic As Per Type Of Load Andsite Requirement ) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828 ( 1996 ) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Ofclass 3 As Per Iec, Minimum Phase Termination Capacity Of 35Sq.Mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted Inexisting Distribution Board / Sheets, Minimum Electrical Operation 20, 000 Upto 20 A Rating And 10, 000 Upto 63 A, 5000 For 80 A & Above Ratingincluding Making Connections, Testing Etc. As Required. Oem Shall Have Submitnabl / Cpri / Erda Accrediated Lab Type Test Reports& All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , Single Pole Mcb ( With B / C Curve Tripping Characteristics ) , 6 A To 32 A Rating , Providing & Fixing Of Modular Type Switch / Bell Push Duly Isi Marked ( Is :3854 ) With Cm / L No. Printed And Made Out Of Unbreakable And Fire Retardant Vergin Uv Stabilized Polycarbonatewith Brass Terminals And Captive Screws & Silver Alloy Contact Tipwith Ip-20 Rating , Minimum Width Ofswitch Toggle ( Push Part ) Should Not Less Then 20Mm, Includingall As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 16 A One Way Switch With Ledindicator , Providing & Fixing Of Modular Type Lockable Feature Socket Dulymade Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tipwith Ip-20 Rating , Includingall As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , 6 A3 / 5 Pin Shuttered Socket , 6 / 16 Ashuttered Socket , Providing & Fixing Of Following Modular Accessories As Per Pwd Specification For Electrical Works, Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tipwith Ip-20 Rating , Includingall As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. As Required.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , Blanking Plate , Modular Mcb 6 A To 32 Asp , Providing & Fixing Offollowing Size Mounting Grid Plates With Cover Plates Made From Fire Retardent Uv Established High Performance Engineering Plastic Suitable For All Universal Metal Boxes For Front Installation & Removal Direct Fit Type Complete In All Respect.All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr , 1 / 2 Module , 3 Module , 8 Module , Providing & Fixing Ofwiring Accessories Oem Fabricated Following Size Gi Box Of 1.2 Mm Thick With Earthing Terminal And Adjustable Floating Clamp In Recess / Surface Suitable For Modular Accessories As Required.All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr , 1-2 Module , 3 Module , 6 / 8 Module , Supplying And Fixing Of Power Plug Point With Modular Accessories As Per Pwd Specification For Electrical Works, On Hot Dipped Galvanized Modular Box Of 1.2 Mm Thick With Earthing Terminal / Connector On Surface Or In Recessed With Suitable Size Of Modular Face Place With Grid Plate And Cover Plate Including Cost Ofisi Marked Modular 16 Amp. Switch ( Is :3854 ) And 6 / 16 Amp. Socket Outlet ( Is:1293 ) Making Connection , Testing , Etc. As Required. For Specification Ofwiring Accessories Refer Chaptere - 07Related Item & For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr , Pipe Earthingas Per Is:3043- 1987 With 3.0 Mtr. Long, 40 Mm Dia. B Class G.I. Pipe Is: 1239 ( Part-1 ) 2004, Equivalent To Bs : 1387 With Perforated Holes Of 12 Mm Dia , Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, And Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height250 To 300 Mm. And Embodying The Pipecomplete With Alternate Layers Salt And Coke / Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Lessas Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book.All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . , Supply & Laying Following Size Earth Stripin Horizontal Or Vertical Run In Surface By Means Of Earth Strip Dmc Insulatorincluding Riveting / Soldering / Welding, Jointing Shall Be Done By Overlapping And With 2 Set Of Brass ( For Cu Strip ) / Gi ( For Gi Strip ) Nut Bolt & Spring Washer Spaced At 50Cm Making Connection Etc. As Required.All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . , 25Mm X 3Mm G.I. ( Hot Dipped ) Strip , Supply & Laying Following Size Earth Wire In Horizontal Or Vertical Run In Ground / Surface / Recess Including Riveting, Soldering, Saddles, Making Connection With Gi / Cu Purity Purity >95%Thimble Etc. As Required.All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . , 6 Swg G.I. ( Hot Dipped ) Wire , Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Arrmouredaluminiumcable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv Withh4- Grade Electrolyticaluminium Conductor Confirming To Is 8130 Of Purity >99.6 %, Round / Flat Strip Armouring Of Cables, Inner / Outer Sheath Confirming To Is:5831In Existing Rcc / Hume / Stoneware / Pvc Pipe / Open Duct / Cable Trench / Cable Tray ( With Cable Tie ) Includingtesting Etc. As Required Of Following Size. Oem Must Have Its Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr. 10.0 Sq. Mm , 4 Core , Supply, Fabricating & Installing Following Sizes Of Hot Dipped Galvanized Iron Cable Tray ( Galvanized Thickness Not Less Then 50 Microns ) With Rungs At Span Of 250Mm Including Horizontal And Vertical Bends, Reducers Tees, Cross Members And Other Accessories As Required And Duly Suspended From The Ceiling / Wall With M.S. Suspenders Etc. As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products / Work, Refer Annexure A Attached With This Bsr . , 150Mm X 50Mm X 1.6Mm , Providing & Fixing Ofiso Certified Company Made Lightning Conductor Finial As Per Pwd Specification For Electrical Works As Per Is 2309-1989 Made Out Of 25 Mm Dia., 300 Mm Long G.I. Solid Rod Having Single Prong At Top With 85 Mm Dia., 3 M Thick G.I. Base Plate Including Holes Etc. Complete As Required.All As Per Pre Approved By Engineer In Charge.All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annex Ure A Attached With This Bsr . , Providing & Fixing Of Testing Joint, Made Out Of 20Mm X 3Mm G.I. Strip, 125 Mm Long, With 4 No.G.I. Bolts, Nuts, Checknuts, Spring Washer Etc. Complete As Required.All As Per Pre Approved By Engineer In Charge. All As Per Pre Approved By Engineer In Charge.For Additional Technical Parameters Of Products / Work, Refer Annex Ure A Attached With This Bsr . , Part - A Toll Booth Lane Equipments , Sitc Of Etc Rfid Reader With 10 Mtrs. Of Range For Hybrid Etc Transactions With 5 Mtrs. Of Powder Coated Heavy Duty Pole. Frequency: E: 865Mhz - 868Mhz, F: 902Mhz - 906Mhz ( Adjustable ) .Specifications Are As Per Technical Specs.Attached Andper Pre Approved By Engineer-In-Charge. , Sitc Of Electronic Enclosure For Etc System With Unique Key Access And As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Lane Contoller System Software As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Automatic Vehicle Classification And Counting System Including Loop Detector, Photo Sensor As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of User Fare Display System With Mounting Pole Powder Coated G.I. Pole O.D.-88Mm, I.D.-80Mm ( 4Mm Wall Thickness ) And 3Mtrs. Height For Mounting As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Automatic Barrier Gate Having 3-4 Mtrs. Of Boom With 0.6 Seconds Boom Closing / Opening Speedas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Overhead Lane Status Light Having Green And Red Color Specificaionsas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Traffic Light With Mouniting Polepowder Coated G.I. Pole O.D.-88Mm, I.D.-80Mm ( 4Mm Wall Thickness ) And 3Mtrs. Height For Mountingas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Loops With Detector As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Incident Capture Camera With Powder Coated G.I. Pole O.D.-88Mm, I.D.-80Mm ( 4Mm Wall Thickness ) And 3Mtrs. Height For Mountingas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Ofautomatic Number Plate Recognition Camera With Powder Coated G.I. Pole O.D.-88Mm, I.D.-80Mm ( 4Mm Wall Thickness ) And 3Mtrs. Height For Mounting Specificationsas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of 21 Led Monitor As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Customized Industrial Grade Keyboard Specifications As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Violation Light And Alarm With Foot Switch As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Cabling Networking, Patch Panel, Rack, Patch Cord As Per Attached Specs. And Pre Approved By Engineer Incharge , Sitc Of Software Lane Level As Per Attached Specs. And Pre Approved By Engineer Incharge , Sitc Of Intercom Slave Unit In Booths As Per Attached Specs. And Pre Approved By Engineer Incharge , Sitc Of Thermal Recepit Printer Ip 54 Rated Have Maximum Print Size Of 145Mm ( W ) X 195Mm ( D ) X 148 ( H ) And As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Part - B Toll Plaza Equipments , Sitc Of Plaza Server In Hot Stand By Configurationas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Workstations For Mis, Cash Up, Audit & Lsdu System ( In Control Room ) As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Network Printer As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Supply , Installation, Testing And Commissioning Of Managed Layer-2 Intelligent Poe Giga Ethernet Switch Providing 24 X 10 / 100 / 1000 Mbpspoe Giga Ethernet Ports And With Min 4 Sfp Giga Ports ( Provision For Fiber Giga Connectivity ) With Provision Of Minimum Stacking Of 06 Switches With Minimum 370 Watt Poe Power Budget With Related Lan Base Software Including Making Connections Etc As Required. As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Rfid Hand Held Reader With Wi Fi Access Pointfor Integration Of Hand Held Readers As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Stc Of Internet Router For Connection To Cce As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Software Plazalevel As Per Attached Specs. And Pre Approved By Engineer Incharge , Sitc Of 1.5 Kva Online Ups System With 2 Hours Of Battery Back Up For Lane As Per Attached Specs. And Pre Approved By Engineer Incharge , Sitc Of 10 Kva Online Ups System With 4 Hours Of Battery Backup For Plaza As Per Attached Specs. And Pre Approved By Engineer Incharge , Survilience System , Sitc Of 55 Led Display For Monitoring As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Network Video Recorder With 8 Sata Portas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Booth / Plaza Cctv Camera With Voice Recording Feature As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Intercom Master Unit In Booth And As Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Sitc Of Firewallas Per Technical Specs.Attached Andpre Approved By Engineer-In-Charge. , Part - Cmaintenance For 2 Years , Providing Exeperience And Highly Skilled Manpower For Repai / Maintenance Of Electromechanical System ( In Three Shifts Of 8 Hr. Each )

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	14-Jul-2023	Addendum No. 01	Date	31-07-2023
2	18-Jul-2023	Addendum No. 02	Technical Bid	31-07-2023
3	18-Jul-2023	Addendum No. 02	BOQ	31-07-2023
4	24-Jul-2023	Addendum No. 03	Technical Bid	31-07-2023

INR 5000 /-

INR 3282000.0 /-

INR 16.41 Crore /-

Name of Work:On-boarding of State Toll Plaza in Rajasthan Under FASTag programme of IHMCL on the roads Under Package-01

Sl. No.	Item Description
1	BSR Items ( Electrical)
2	S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR
3	25 mm
4	Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure "A" attached with this BSR
5	3x 1.5 sq.mm
6	2 x 2.5 sq. mm. + 1x1.5sqmm
7	1 x 6.0 sq.mm
8	Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure "A" attached with this BSR
9	Single pole MCB (With B/C curve tripping Characteristics)
10	6 A to 32 A rating
11	Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonatewith brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,minimum width ofswitch toggle( PUSH PART ) should not less then 20mm,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR
12	16 A one way switch With LedIndicator
13	Providing & Fixing of modular type lockable feature socket dulymade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure "A" attached with this BSR
14	6 A3/5 pin shuttered socket
15	6/16 Ashuttered socket
16	Providing & Fixing of following modular accessories as per PWD specification for electrical Works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure "A" attached with this BSR
17	Blanking plate
18	Modular MCB 6 A to 32 ASP
19	Providing & Fixing offollowing size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR
20	1/2 Module
21	3 Module
22	8 Module
23	Providing & Fixing ofWiring Accessories OEM fabricated following size GI box of 1.2 mm thick with earthing terminal and adjustable floating clamp in recess/ surface suitable for modular accessories as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR
24	1-2 Module
25	3 Module
26	6 / 8 module
27	Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure "A" attached with this BSR
28	Pipe Earthingas per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. " B " class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
29	Supply & Laying following size earth stripin horizontal or vertical run in surface by means of Earth strip DMC Insulatorincluding riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
30	25mm x 3mm G.I. ( Hot Dipped) Strip
31	Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles,making connection with GI/Cu purity purity >95%thimble etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
32	6 SWG G.I. ( Hot Dipped) Wire
33	Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed ArrmouredAluminiumcable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV withH4- Grade electrolyticaluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) includingtesting etc. as required of following size. OEM must have it"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure "A" attached with this BSR. 10.0 Sq. mm
34	4 core
35	Supply, Fabricating & installing following sizes of Hot dipped Galvanized iron cable tray ( Galvanized thickness not less then 50 microns) with rungs at span of 250mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with M.S. suspenders etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure "A" attached with this BSR .
36	150mm x 50mm x 1.6mm
37	Providing & Fixing ofISO Certified company made lightning conductor finial as per PWD specification for electrical Works as per IS 2309-1989 made out of 25 mm dia.,300 mm long G.I. solid Rod having single prong at top with 85 mm dia., 3 m thick G.I. base plate including holes etc. complete as required.All as per pre approved by Engineer in charge.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annex ure "A" attached with this BSR .
38	Providing & Fixing of testing joint, made out of 20mm x 3mm G.I. Strip, 125 mm long, with 4 no.G.I. bolts, nuts, checknuts, spring washer etc. complete as required.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annex ure "A" attached with this BSR .
39	Part - A Toll Booth Lane Equipments
40	SITC of ETC RFID Reader with 10 Mtrs. Of Range for Hybrid ETC transactions with 5 Mtrs. of Powder Coated Heavy Duty Pole. Frequency: E: 865MHz - 868MHz, F: 902MHz - 906MHz (adjustable).Specifications are as per Technical Specs.attached andper pre approved by Engineer-in-Charge.
41	SITC of Electronic enclosure for ETC System with Unique Key Access and as per Technical Specs.attached andpre approved by Engineer-in-Charge.
42	SITC of Lane Contoller System Software as per Technical Specs.attached andpre approved by Engineer-in-Charge.
43	SITC of Automatic Vehicle Classification and Counting System including Loop Detector, Photo sensor as per Technical Specs.attached andpre approved by Engineer-in-Charge.
44	SITC of User fare display System with mounting pole Powder Coated G.I. Pole O.D.-88mm, I.D.-80mm (4mm Wall Thickness) and 3Mtrs. Height for mounting as per Technical Specs.attached andpre approved by Engineer-in-Charge.
45	SITC of Automatic Barrier Gate Having 3-4 Mtrs. Of Boom with 0.6 Seconds Boom Closing/Opening Speedas per Technical Specs.attached andpre approved by Engineer-in-Charge.
46	SITC of Overhead lane status light having Green and Red Color Specificaionsas per Technical Specs.attached andpre approved by Engineer-in-Charge.
47	SITC of Traffic light with Mouniting polePowder Coated G.I. Pole O.D.-88mm, I.D.-80mm (4mm Wall Thickness) and 3Mtrs. Height for mountingas per Technical Specs.attached andpre approved by Engineer-in-Charge.
48	SITC of Loops with detector as per Technical Specs.attached andpre approved by Engineer-in-Charge.
49	SITC of Incident capture camera with Powder Coated G.I. Pole O.D.-88mm, I.D.-80mm (4mm Wall Thickness) and 3Mtrs. Height for mountingas per Technical Specs.attached andpre approved by Engineer-in-Charge.
50	SITC ofAutomatic Number Plate Recognition Camera with Powder Coated G.I. Pole O.D.-88mm, I.D.-80mm (4mm Wall Thickness) and 3Mtrs. Height for mounting specificationsas per Technical Specs.attached andpre approved by Engineer-in-Charge.
51	SITC of 21" LED Monitor as per Technical Specs.attached andpre approved by Engineer-in-Charge.
52	SITC of Customized industrial grade keyboard specifications as per Technical Specs.attached andpre approved by Engineer-in-Charge.
53	SITC of Violation light and alarm with foot switch as per Technical Specs.attached andpre approved by Engineer-in-Charge.
54	SITC of Cabling networking, Patch panel, Rack, Patch cord as per attached specs. And pre approved by Engineer Incharge
55	SITC of Software lane level as per attached specs. And pre approved by Engineer Incharge
56	SITC of Intercom slave unit in booths as per attached specs. And pre approved by Engineer Incharge
57	SITC of Thermal Recepit Printer IP 54 Rated have Maximum Print Size of 145mm (W) x 195mm (D) x 148 (H) and as per Technical Specs.attached andpre approved by Engineer-in-Charge.
58	Part - B Toll Plaza Equipments
59	SITC of Plaza server In Hot Stand by configurationas per Technical Specs.attached andpre approved by Engineer-in-Charge.
60	SITC Workstations for MIS, Cash up, Audit & LSDU System (in control room)as per Technical Specs.attached andpre approved by Engineer-in-Charge.
61	SITC of Network Printer as per Technical Specs.attached andpre approved by Engineer-in-Charge.
62	Supply , Installation, Testing and Commissioning of Managed Layer-2 Intelligent PoE Giga Ethernet Switch providing 24 x 10/100/1000 MBPSPoE Giga Ethernet ports and with min 4 SFP Giga Ports (provision for Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with minimum 370 Watt PoE Power Budget with related LAN Base Software including making connections etc as required. as per Technical Specs.attached andpre approved by Engineer-in-Charge.
63	SITC of RFID Hand held Reader with Wi Fi Access Pointfor Integration of Hand held Readers as per Technical Specs.attached andpre approved by Engineer-in-Charge.
64	STC of Internet router for connection to CCE as per Technical Specs.attached andpre approved by Engineer-in-Charge.
65	SITC of Software Plazalevel as per attached specs. And pre approved by Engineer Incharge
66	SITC of 1.5 KVA Online UPS System with 2 Hours of Battery Back up for Lane as per attached specs. And pre approved by Engineer Incharge
67	SITC of 10 KVA Online UPS system with 4 Hours of Battery Backup for plaza as per attached specs. And pre approved by Engineer Incharge
68	Survilience System
69	SITC of 55" LED display for Monitoring as per Technical Specs.attached andpre approved by Engineer-in-Charge.
70	SITC of Network Video Recorder with 8 SATA Portas per Technical Specs.attached andpre approved by Engineer-in-Charge.
71	SITC of Booth / Plaza CCTV camera with voice recording feature as per Technical Specs.attached andpre approved by Engineer-in-Charge.
72	SITC of Intercom Master unit in booth and as per Technical Specs.attached andpre approved by Engineer-in-Charge.
73	SITC of Firewallas per Technical Specs.attached andpre approved by Engineer-in-Charge.
74	Part - CMaintenance for 2 years
75	Providing exeperience and highly skilled manpower for repai/maintenance of electromechanical system (In three shifts of 8 hr. each)