Jadavpur University-JU has published Construction A New Ahu Room At The Side Of Ac Canteen Including Another Ahu Room At 1St Floor Lobby Of Gandhi Bhavan And Other Allied Work In The Ju Main Campus. Submission Date for this Tender is 18-07-2023. Air Handling Unit Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone)including removing, spreading or ……….water as required complete. (a) Depth of excavation not exceeding 1,500 mm. Section- A, Item-2,a |
| 2 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and…..finished quantity) Section- A, Item-4,a |
| 3 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed.... within a lead of 75 m. a) In ground floor including roof. Section- B, Item-1,a |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and (Section- C, Item-1) |
| 5 | Cement concrete with graded jhama khoa (30 mm size) ….excluding shuttering In ground floor and foundation (a) 1:3:6 proportion Section- C, Item-B,1,a |
| 6 | Brick work with 1st class bricks in cement mortar (1:6)... (b) In superstructure, ground floor Section- C, Item-22,b |
| 7 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.Section- C, Item-16 |
| 8 | Plaster to wall floor ceiling etc with sand cement mortar including rounding off or chamfering with1:4cement mortar 20mm thick plaster.Gr.flr level. Section- I, Item -1,ii,a |
| 9 | Neat cement punning about 1.5mm thick in wall,dado,window sill,floor etc. Section- I, Item -8 |
| 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props……….completion of works (upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Section- C, Item-36,a |
| 11 | Reinforcement for reinforced concrete work in all sorts initia lstraightening and removal of loose rust (if necessary), cutting to requisite length, hooking and , placing in proper position and binding with 16 gauge black annealed wire at……...every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel Section- C, Corrigendum 2, Item No-1(i) |
| 12 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety Section- C, Item-5,a |
| 13 | Cutting chase upto 125 x 150 mm. and subsequent mending of damages(b) in concrete wall [Cement-3.6 Kg/Mtr] Section-B, Item-11,b |
| 14 | Priming one coat on plaster or timber surface with synthetic oil bound primer of approved qualitywith synthetic oil bound primer of approved quality.Section-K, A,Item-1,b |
| 15 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Section-K,A Item-1,a |
| 16 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : (iv) One coats (with any shade except white) |
| 17 | (b) On steel or other metal surface : (iv)One coats (with any shade except white) Section-K,A Item-2,a/b, iv |
| 18 | Applying Exterior grade Acrylic primer of approved or new surface to receive decorative textured…as per direction of the EIC. (a) One Coat Section-J Item-8,a |
| 19 | Protective and Decorative Acrylic exterior emulsion and paint of approved quality, as per manufacturer"s specification …………………… excluding the cost of primer.b) Premium 100% Acrylic Emulsion. Section-J Item-19,b h) Louvered window |
| 20 | i) Top, bottom and side member |
| 21 | ii) Louvered Section. |
| 22 | iii) Cleat angle ( Non-annodized). (Section- R,Item-1,h) |
| 23 | Supplying, fitting and fixing in position fibre glass panes of approved quality with resin, nail, clip etc. as per IS:12866-1989. (In all floors for internal wall & upto (a) 1.2 mm thick (1.85 Kg/Sq.m) Section-L Item-7,a |
| 24 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing …or by synthetic adhesive & grout materials etc. (C) FLOOR With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm (b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick] (ii) Other than Coloured decorative including white |
| 25 | (D) Wall With Polymerised Adhesive and Epoxy grout pointing including spacer- 2 mm (b) Area of each tile above 0.09 Sq.m [using adhesive ii) other than Coloured decorative including white |
| 26 | Section- D, Item-35 M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes …….. nuts, washer or screws etc. Section- F, Item-8 |
| 27 | M.S. structural works in roof trusses with tubularctions………………………………….including cutting charges etc.i) For roof truss works.a) Span up to 12 Mtr Section-F, Item-2,A |
| 28 | Supplying , fitting & fixing Zn -Al alloy coated ( followed by colour coated ) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) (i) In Roof:- With 0.50mm thick sheet (Item no. 15 Page no. 77) |
| 29 | Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 30 | (b) Continuous weld |
| 31 | Section- F,b Item-2,a/b (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(ii)Grill weighing above 16 Kg./sq.mtr and upto 16kg/Sqm Section F, Item-13,ii |
| 32 | Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I…………aluminium paint over a coat of red lead primer complete. Section-F Item-19(a) |
| 33 | Providing and fixing exterior quality Aluminium Composite Panel (ACP)on the existing frame work by folding the edges of ACP panel (Engravingthe rear surface of ACP sheet) with CP angles, cleats and strainless Steel …………...direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating) |
| 34 | Section-R, Item-27,a Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)Section-J, Item-B 5,i |
| 35 | Acrylic Distemper to interior wall, ceiling with a coat of (as per manufacturer"s specification)including cleaning and smoothning of surface. Two Coats Section- J, Item-10 |
| 36 | Supply of UPVC pipes & fittings conforming….. A)i) Single Socketed 3Mtr Lengthb)110mm dia |
| 37 | B) Fittings: xi) Door Bend (TS)-110mm dia |
| 38 | xxi) 110 X 110 P Trap,75mm |
| 39 | xvi) pipe clip-110mm Section- B(II) Item-23,B(Sanitory) |
| 40 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming...(a) For Exposed Work (i) CPVC Pipes Class-1, SDR-11 -15 mm Section-A,III Item -1a |
| 41 | Supplying 1.5mm thick M.S. sheet fitted and fixed on per design including cost of all labour and materials. Section-F Item-15 |
| 42 | Supplying, fitting and fixing soap holder.(a) PTMT (Prayag or equivalent) PCS [Item18 page-82 |
| 43 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm PCS [Item 19 page-82 |
| 44 | Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass (i) 25 mm dia. and 450 mm long PCS [Item 22 page-82 |
| 45 | Supplying, fitting and fixing shower of approved brand and make.(g) PTMT overhead shower ( Prayag or equivalent)(ii) 150 mm round |
| 46 | Supply plumber mistry Section- C Item-1(Sanitory) |
| 47 | Supply Santaraj Section- C Item-1(Sanitory) |
| 48 | Supply Mazdoor Section- II(M/L), Item-3 |
| 49 | Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in…..A) With Pakur variety. (Other than SAIL/TATA/RINL) Section- B(iv), Item-2,A(Sanitory) |
| 50 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed.stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concretingat bottom and sides). Section- B, Item-13 |
| 51 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity ……………... direction of Engineer in charge. Section- B, Item-13 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
