|
| 1 | Civil works |
| 2 | Supply and laying of Selection-1 / Japanica Joyciagrass turf, disease free, glossy green etc. well grown, carpet formed 2\" thickness about for an area of 15613 sqmtr. Including transportation & delivery at site as per instruction of in-charge at site at 1:5 ratio for dibbling etc. complete in all respect as directed by Engineer-in-charge. |
| 3 | Supply of cow dung manure, well decomposed, garbage free including transportation & delivery at nursery per tractor load etc. complete in all respect as directed by Engineer-in-charge. |
| 4 | Lifting & spreading of manure uniformly over the surface area as per landscape design/advice of the site in-charge & etc. complete in all respect as directed by Engineer-in-charge. |
| 5 | Digging of pits size (2\"x2\"x2\") application of fertilizer, pesticide, manuare, planting, staking, after care with 20% mortality replacement all etc. complete in all respect as directed by Engineer-in-charge. |
| 6 | Supply of Mimusops elengi tree well grown, decorative stage, healthy & disease free including transportation and delivery to site etc. complete in all respect as directed by Engineer-in-charge. |
| 7 | Supply of Delonix regia well grown, healthy & disease free including transportation and delivery to the site etc. complete in all respect as directed by Engineer-in-charge. |
| 8 | Supply of Caesalpinia pulcherima well grown, healthy & disease free including transportation and delivery to the site etc. complete in all respect as directed by Engineer-in-charge. |
| 9 | Supply of Varigatad tagar well grown, healthy & disease free including transportation and delivery to the site etc. complete in all respect as directed by Engineer-in-charge. |
| 10 | Supply of Juniper species 2\"ht. well grown, decorative stage, healthy & disease free including transporation and delivery to the site etc. complete in all respect as directed by Engineer-in-charge. |
| 11 | Supply of Hibiscus Rosachinensis 3\" ht. well grown, health & disease free including trasportation and delivery site etc. complete in all respect as directed by Engineer-in-charge. |
| 12 | Supply of Nereium Oleander 3½\" ht. well grown, healthy & disease free including transportation and delivery to the site etc. complete in all respect as directed by Engineer-in-charge. |
| 13 | Supply of Ixora Coccena 2½\" ht. well grown, healthy & disease free including transportation and delivery site etc. complete in all respect as directed by Engineer-in-charge. |
| 14 | Supplyig, fitting and fixing of FRP tree pit made out of MS structural member of outer dia 4\"-0\" and inner dia 2\"-0\" and 3mm thick FRP materials of approved quality and designincluding all cost of materials, labour and T&P etc. complete as per direction of EIC. |
| 15 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified materials within all lift and lead upto 1000m as per Clause 501.8.3.2 of MoRT&H Specifications for Road & Bridge works and direction of EIC. |
| 16 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per Clause 502 of MoRT&H Specifications for Road & Bridge works |
| 17 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 503 ofMoRT&H specification for road and bridge work (5th revision)and direction of EIC. |
| 18 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per centby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects and as per direction of EIC. |
| 19 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 509 complete in all respects and as per direction of EIC. |
| 20 | Dismantling and removingold paver block including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m.lead including cost of alllabours,T & P required for the work etc. Complete as directed by EIC. |
| 21 | Dismantling and removing cement concrete includingstacking the same for reuse and removing the debris within 50m.lead including cost of alllabours,T & P required for the work etc. Complete as directed by EIC. |
| 22 | Dismantaling and removing MS frame and fencing including removal of frames, hinges, fastening and stacking the same at proper place including removiing the debris away from the work siteetc comp. as per direction of EIC. |
| 23 | Dismantling brick or stone masonry in lime or cement mortar under 3m height includingstacking the useful materials for reuse and removing the debris within 50m lead. including cost of alllabours,T & P required for the work etc. Complete as directed by EIC. |
| 24 | Supplying all materials, labour, T&P and fixing stone cladding of approved brand, design, make & shade on 12mm thick cement plaster (1:3) jointed with neat cement, slurry mixed with pigment to match the shed of stone complete as per specification and direction of EIC including cost, carriage, cost of all materials, labour, T&P required to complete the work. (Stone design will be given by EIC) |
| 25 | Supplying and layng of Cobble stone (average thickness 150mm) of size 100 x 200mm with 10mm grooves dark grey colour stone and designincluding cost of alllabours,T & P required for the work etc. Complete as directed by EIC. |
| 26 | (a) Providing and fixing GFRC (Glass Fiber Reinforced Concrete) letter in the style as directed IN English and Odia script where each letter shall have the avg height of 700mm and width of 75mm to be fixed on the top face of the entrance gate by using anchor fasteners such as hilty/fischer at 7.50 m to 9.0 m including cost of all materials, T&P, Scafoldings, royalty, taxes etc. complete.(b) Providing and fixing GFRC (Glass Fiber Reinforced Concrete) letter in the style OMC logo proposinate to the dishplay copy of logo avialable iat OMC web site to be fixed in vertical wall in between two gates by using anchor fasteners such as hilty/fischer including cost of all materials, T&P, Scafoldings, royalty, taxes etc. complete.(c) Painting the logo as well as signage letters with exterior acrlyc base texture paint over approved primer of approved brand and shade over finished surface including cost of all materials, T&P, Scafoldings, royalty, taxes etc. complete as directed by EIC. |
| 27 | Supplying all materials, labour, T&P and fitting and fixing of outdoor chimes of 10\"-0\" wide by 8\"-0\" high, frame specifications include frame, trusses, grouting with 3\"x1\"rectangular MS Pipe, Chimes specification with 3\"dia 2mm thickness 304 grade stainless steel pipe, 16 pipes @ 6\" C/C, frequencies, generated based on the length of pipes, Gong mechanism concealed pandulum, resutling in only the SS pipes being visible externally as per drawing and design and specification and as per direction of EIC. |
| 28 | Supplying, fitting and fixing of Sculpture made out with approved Khondalite / sandstone of 4\"-0\" height with approved size, quality and designincluding cost of all materials, labours,T & P required for the work etc. Complete as directed by EIC. (Sculputure design will be given by EIC.) |
| 29 | Supplying and Installation and commissioning of fountain including Civil structure as per the following specification and as directed by EIC. A) G.I ring of 10\"-0\" dia of Jindal B-Class pipe of 1\"-5\"inner dia for 1st crown nozzle. B) Crown nozzle of brass with nickel chromium plating for ring effect, 1/4\" with 4mm bore with control valve. C) Open well submersible pump 3HP (40 x 40) single phase with suction stunner and other fittings. D) Starter panel for submersible pump. E) ELectrical submersible cable complete in all respect 3 core flat 1.50mm and 4 core 1mm copper conductor PVC insulated flat ware for pump. F) UPVC plumbing and its fitting in 10Kg pressure with GI stand, GI manifold bush, socket, Tee, Elbow, Control valve, Gate valve etc of Supreme aqua gold. G) Multi colour RGB Nozzle mounted light 18W, 12V ABS body, fixture with water proof light protected, dynamic colour changing capability toughen glass elastomar sealed make. H) Controller for programable colour changing system with 6-8 station changing option with RGB LED light and conversion from 220 V to 12 V. I) RCC water tank of 8\"-0\" dia and 2\"-0\" height with floor and wall tiles etc. |
| 30 | Supplying, fitting and fixing of prefabricated bench of size 1500mm x 450mm x 450mm made out of wood and cast iron of approved design and quality as per approved drawing supplied by Deptt including all cost of labour, materials, T&P etc. complete as per direction of EIC. |
| 31 | Supplyig, fitting and fixing of Semi open FRP roofing made out of stainless steel structural member of 150mm dia and roofing made out of3mm thick FRP materials of approved quality and designincluding all cost of materials, labour and T&P etc. complete as per direction of EIC. |
| 32 | Laying of 80mm thick compacted pre-cast interlocking UNI PAVER blocks available from dismantled quantity over compacted bed of sand laying of paver blocks in to the sand bedding layer through vibrator compaction by using plate vibrator, filling the joints with sand and finishing the surface including cutting of blocks at the edges with all labour and materials cost etc.work complete as per direction of Engineer-in-Charge. |
| 33 | Providing & laying precast, precured cement concrete (M-30 grade) Kerb stone (600x300x150mm) with graded stonne aggregates & fixing in position & pattern as shown in drawing with cement mortar of (1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required including cost of all materials, labour, T&P etc. complete in all respect as per specification and as directed by Engineer -in -charge. |
| 34 | Supplying all materials, labour and T&P for Steel work in built up tubular (Square & Rectangular hollow tubes of different sizes) in column, trusses etc., including cutting, hoisting, fixing in position including welding and bolted with special shaped washer etc. using required size of MS Base plate 50mm thick and Gusset plate of 8-10 mm thick as per detail design and as per site requirements. The welding / bolting surface to be finished after positioning of trusses including all cost of materials, scaffolding, labour, T&P etc. complete as per direction of EIC. |
| 35 | Painting two coats with approved brand of synthetic enamel paint of approved shade and quality over a coat of approved primer to iron works including cost of paint, primer, putty, scaffolding, T&P, cost, conveyance, cost of all materials and cost of all labour required for the work etc. complete as per the direction of EIC. (Paints of Burger/Nerolac/J&N /Asian/ ICIBrand is to be used.) |
| 36 | Earth work in excavation of foundation trenches in all kinds of soil including moorum, stony earth and earth mixed with boulders (except sheet rocks and boulders requiring for blasting) including dressing and leveling the bed up to the required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P shoring and shuttering and dewatering if required etc. comp. as directed by EIC. |
| 37 | Filling foundation and plinth with river sand, well watered, rammed including cost, conveyance, royalties of materials, cost of all labour and T&P required for the work etc. complete as per direction of EIC. |
| 38 | P.C.C. of prop. (1:3:6) in foundation using 40 mm. size crusher broken hard granite metal of approved quality from approved quarry including lowering, laying concrete to required levels laid in layers not exceeding 150mm thick including cost, conveyance, royalties of all materials, watering and curing and cost of all labour, T&P required for the work etc. comp as per direction of EIC. |
| 39 | Supplying all materials, labour, T&P and fixing precast designer paver block of M-30 grade 80mm thick of approved make stone finish texture on floors over 25mm thick sand complete as per specification and direction of EIC including cost, carriage, cost of all materials cost of all labour, T&P required to complete the work (Make:- GICO or equivalent). |
| 40 | Supplying, fitting and fixing of GD brown stone of approved quality, size and designincluding cost, conveyance, royalties of all materials, watering and curing and cost of all labour, T&P required for the work etc. comp as per direction of EIC. |
| 41 | Supplying, fitting and fixing Kota stone 16mm thick in floorsof approved make laid C.M (1:4) & filling joints with tile grout of approved quality and shade including cost of all materials, labour, all, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 42 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) |
| 43 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in footing and foundation. |
| 44 | Supplying HYSDbars of appd. Quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC workincluding cost,head load, conveyance of HYSD bars (Fe500) and binding wires of 18 to 20 gauge and cost of labour, T&P required to comp. in all respectas directed by the EIC. |
| 45 | Providing & fixing 20 mm thick marble stone in flooring on 20 mm thick bed thick bed of cement mortar 1:4 (1 cement : 4 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete as per the direction of Engineer-in-Charge. |
| 46 | Provision of IPEY wood of 100mm thick over sitting benches of approved make and design including cost of all labour, T&P required for the work etc. comp as per direction of EIC. |
| 47 | Supplying all materials, labour, T&P for fitting & fixing and laying 25mm dia uPVC pipes (Sch-80) and fittings including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme) |
| 48 | Supplying all materials, labour, T & P and fitting and fixing 25mm dia brass full way valve withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:- Leader / Shakti) |
| 49 | Supplying all materials, labour, T & P and fitting and fixing 25mm dia uPVC F.W. ball valve withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:- Supreme / Astral / Ashirbad) |
| 50 | Providing, laying, spreading and compacting graded stone aggregate (Gr-II)to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 404 of MoRT&H specifications for Road & Bridgeworks (5th Revision) and as per direction of EIC. |
| 51 | Providing 25 cmx 23 cm concrete drain with CC (1:3:6) and cement plaster (1:3) finished smooth with 10 cm thick concrete over hard baseincluding cost, conveyance, royalties of all materials, watering and curing and cost of all labour, T&P required for the work etc. comp as per direction of EIC. |
| 52 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete(Earth measured in stacks will be reduced by 20% for payment) with all lead and lift to complete the work as per direction of EIC. |
| 53 | Provision of tree guard made out of Mess Planet PVC coated iron 12mm HDPE fencing net bird 4\"-0\"height 3\"-0\"dia width UV stabilized green colour including all cost of labour, material T&P etc. complete as per direction of EIC. |
| 54 | Electrical works |
| 55 | Supply, Installation, Testing and Commissioning of Minimum 35Watt LED Post-top luminary fitting (As per the GTP attached in the SBD) with 3 Mtr long Architectural Lighting Pole (As perthe detail Drawing attached in the SBD) with base concreting of pole (As per the Foundation drawing attached in the SBD) including all accessories and connection as per direction of Engineer in Charge. |
| 56 | Supply, Installation, Testing and Commissioning of Minimum 8 Watt LED Bollard Light luminary fitting (As per the GTP attached in the SBD) with base concreting of Bollard (As per the Foundation drawing attached in the SBD) including all accessories and connection as per direction of Engineer in Charge. |
| 57 | Supply, Installation, Testing and Commissioning of Minimum 12 Watt LED Spike Light luminary fitting (As per the GTP attached in the SBD) with base concreting of Spike including all accessories and connection as per direction of Engineer in Charge. |
| 58 | Supply and Laying of Minimum 9 Watt/Mtr Warm White LED Neon Light Mininum Dimension 9X15 mm including Inter connector, pin, end cap, front cap, aluminum clip etc all accessories and connection as per direction of Engineer in Charge. |
| 59 | Supply and Laying of 3.5core 50 sq mm Aluminium XLPE armoured cable under ground including all accessories ,materials as required as per the direction ofEngineer in Charge. |
| 60 | Supply and Laying of 4 core 10 sq mm Aluminium XLPE armoured cable under ground including all accessories ,materials as required as per the direction ofEngineer in Charge. |
| 61 | Supply and Laying of 5 core 2.5 sq.mmPVC unarmoured Copper Cables in 25 mm HDPE pipe including all accessories ,materials as required as per the direction ofEngineer in Charge. |
| 62 | Supply and Laying of 3 core 2.5 sq.mmPVC unarmoured Copper Cables in 25 mm HDPE pipe including all accessories ,materials as required as per the direction ofEngineer in Charge. |
| 63 | Supply and Laying of 3 core 1 sq.mmPVC unarmoured Copper Cables in 25 mm HDPE pipe including all accessories ,materials as required as per the direction ofEngineer in Charge. |
| 64 | Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle outdoor panel totally enclosed, dust and vermin proof with IP-66 protection with hinged and lockable doors. CRCA sheets (16 SWG)including Busbars,interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 25 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.MAIN PANEL Incoming : 125A 4P MCCB (25kA) - 1 No with extended rotary handle-1 No and Spreader Terminal-1 set (Set of 8),SPD 50KN, Type-1+2 3P+N 125Amp - 1 set,100Amp, 4P, HRC Fuse link for open execution with Extended ROM and Operating Handle - 1 setOutgoing : 63A TPN MCB(C-Curve) - 2 Nos,32A TPN MCB(C-Curve) - 5 Nos,32A DP MCB(C-Curve) - 2 NosInstrument : 3-Ph LED Type Voltmeter and Ammeter-2Nos,150/5A C.L. 1.0, 5VA, CT- 3 NosR-Y-B LED Indicating lamp -3 Nos6Amp SP MCB, 10KA (C-curve)-3 NoDigital Timer Switch-1 No,3 Pole, 415V, 95A Power Contactor with 2NO+2NC -1No 20x5mm Aluminium bus bar, 11KV drum Insulator-12 Nos with Internal wiring.The panels shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves. |
| 65 | Supply, installation, testing & commissioning of floor mounting front operated front access extensible type cubicle outdoor panel totally enclosed, dust and vermin proof with IP-66 protection with hinged and lockable doors. CRCA sheets (16 SWG)including Busbars,interconnections, tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 25 kAmp symmetrical for 1 sec at 415 V complete as per below specifications, as required as per direction of Engineer in Charge.MAIN PANEL Incoming : 63Amp,TPN MCB(C-Curve) - 1 NoOutgoing : 32A TPN MCB(C-Curve) - 5 Nos,32A DP MCB(C-Curve) - 2 NosInstrument : 3-Ph LED Type Voltmeter and Ammeter-2Nos,150/5A C.L. 1.0, 5VA, CT- 3 Nos,R-Y-B LED Indicating lamp -3 Nos,6Amp SP MCB, 10KA (C-curve)-3 No,20x5mm Aluminium bus bar -4 Nos,11KV drum Insulator-12 Nos.The panels shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves. |
| 66 | Supply and fixing of chemical Earthing of3mtr long40mm dia chemical filled comound and GI earth electrodeincluding excavation of earth pit with highly conductive back filled chemical compund of 2 x25kg , brick work in cement mortar masonary workwith removable cover for Earth pit chamber ofsuitable size including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
