Tender For Tn04-02-04 / Agamt - Ii 2023-24 - Nallampalli Block P04 - Construction Of Anganwadi Building At Boothanahalli H/O Boothanahalli - P04
Tender Value
14.31 Lakhs
Estimated cost
Bid Submission
19 Jul 2023
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nallampalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Tn04-02-04 / Agamt - Ii 2023-24 - Nallampalli Block P04 - Construction Of Anganwadi Building At Boothanahalli H / O Boothanahalli - P04
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Anganwadi Building at Boothanahalli H/o Boothanahalli |
| 2 | EARTHWORK EXCAVATION,for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wheriver necessary and refilling the sides of foundation with and baling out water wheriver necessary and refilling the sides of foundation with excavated earth in layers of not More than 15cm thick, well rammed and consolidated and depositing the surp us earth within the compound in places shown by the departmental officers with Initial lead and lift etc.,including levelling the sites complete complying with standard specifications and as directed.(Hard Soil) |
| 3 | Cement concrete 1:4: 8 mix using 40mm HBG metal for foundation Including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed |
| 4 | Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.Basement |
| 5 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle |
| 6 | Basement to Top of Parapet |
| 7 | Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs |
| 8 | Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. |
| 9 | Finishing the exposed surface of RCC item of work such as slabs beams, sunshade, facia, canopy slab, staircase waist slab etc., with CM 1:3, 10mm thick, etc., complete complying with standard specifications and as directed by the departmental officers. |
| 10 | Plastering with CM 1:4, 20mm thick.over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.Septic Tank Inner Cross wallSeptic Tank Bottom Septic tank Top |
| 11 | Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 12 | Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dses Roof SlabMain BuildingSplash PortionToilet PortionSplash Portion |
| 13 | Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth.Main BuildingSplash PortionToilet PortionSplash Portion |
| 14 | Paving the floor with scratch proof design ceramic tiles of any colour and any size laid in CM 1:3, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly completed.FlooringHallSide alroundKitchenStore |
| 15 | Paving the floor with scratch proof design ceramic tiles of any colour and any size laid in CM 1:3, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to slut the colour of the tiles including finishing the joints neatly completed.FlooringtoiletD/F WC |
| 16 | Dadooing walls with Colour Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick, and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to slut the colour of the tiles including finishing the joints neatly complying with the standard.Toilet Sides alroundD/F Door DD/F Door D2 |
| 17 | Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1: 2: 4 mix using 10-12mm ISS HBG metal and the top rubed smooth etc., complete complying with standard specification as directed. 1.20mm thick for Resid |
| 18 | Distembering two coats using best approved Interiar oll destember with one coat primer over New plastered Surface including cost and conveyance of materials and labour charges etc complete |
| 19 | Painting Two Coats Approved Plastic Emultion Paint with one coat primer over New Cement Plastered surface including cost and conveyance of materials and labour charges etc complete.Schedule ItemNo.359-B) |
| 20 | Black Board Paint Two Coats with Approved Cement Paint over Cement Plastered surface including cost and conveyance of materials and labour charges etc complete.Black Board |
| 21 | Painting two coats over New Iron Works using best quality of enamel and conveyance of materials and labour charges etc complete |
| 22 | Supply and Cost of Steel door, Window, Ventilator |
| 23 | Door D (0.90x 2.10m) |
| 24 | Door D1 (0.75 x 1.20m) |
| 25 | Door D2 (0.75 x 2.10m) |
| 26 | Windows (1.20 x 1.30m) |
| 27 | Ventilator (0.90x0.45m) |
| 28 | Jolly (0.90x0.45m) |
| 29 | Fixing Charges of Steel doors, windows and ventilators |
| 30 | Door D (0.90x 2.10m)Door D1 (0.75 x 1.20m)Door D2 (0.75 x 2.10m) |
| 31 | Windows (1.20 x 1.30m)Ventilator (0.90x0.45m) |
| 32 | Supply and fixing of Cuddappa Slab 40mm Thick including cost and Conveyance of all site etc. Complete.Shelf at storecubboard Hall & KitchenGas platform |
| 33 | Provision for Electrification arrangements |
| 34 | Light & Fan Point SD.no.23 |
| 35 | Supply&Fixing of Tube Light SD.no.88 |
| 36 | CFL SD.no.80 |
| 37 | BHF with CFL SD.no.83 |
| 38 | Supply&Fixing of Street light SD No.94 |
| 39 | Supply & Fixing of Fan SD.no.110 |
| 40 | Plug Point SD.no.36 |
| 41 | Power Plug Point SD.no.39 |
| 42 | S & Fixing DP Main switch SD.no.142 |
| 43 | S& FixingTNEB Meter board SD.no.125 |
| 44 | Service pipe SD.no.73 |
| 45 | Service Connection SD.no.68 |
| 46 | Service Charge to EB |
| 47 | Supply & Fixing of Exhaust Fan SD 114 |
| 48 | Provision for Painting Drawing, Animation Cartoons & Alphabets etc |
| 49 | Provision of Water Supply arrangment |
| 50 | 1000 Ltr Tank |
| 51 | 50mm PVC Pipe |
| 52 | 50mm PVC Bend |
| 53 | 25mm PVC Pipe |
| 54 | 25mm PVC Elbow |
| 55 | 25mm PVC Tee |
| 56 | Tap |
| 57 | Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends,& clamps etc.,Outer |
| 58 | Provision for RWH including pipes & specials etc., all complete |
| 59 | Provision of EWC, |
| 60 | Provision of Baby IWC |
| 61 | Towards sanitary pipes arrangements including all cost and conveyance etc., |
| 62 | Provision towards Name Board |
| 63 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Jul 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 19, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 19, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender