Reconstruction Work Of Sonua To Gazpur Via Madupur-Vikrampur-Kharimati-Bari Road (Total Length 13.490 K.M.)
Tender Value
55.62 Crore
Estimated cost
Bid Submission
14 Jul 2023
0 days left
EMD
55.63 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sonua → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Reconstruction Work of Sonua to Gazpur via Madupur-Vikrampur-Kharimati-Bari Road (Total Length 13.490 k.m.)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and tress girth upto 300 mm, removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking of sericeable material to be used of auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. |
| 2 | Cutting of trees,including cutting of trunks,branches and removal of stumps,roots, stacking of serviceble material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. (i) 300-600 mm |
| 3 | Cutting of trees,including cutting of trunks,branches and removal of stumps,roots, stacking of serviceble material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. (ii) 600-900 mm |
| 4 | Cutting of trees,including cutting of trunks,branches and removal of stumps,roots, stacking of serviceble material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. (iii) 900-1800 mm |
| 5 | Cutting of trees, including cutting of trunks,branches and removal of stumps,roots, stacking of serviceble material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit. (iv) >1800 mm |
| 6 | Removal of telephone/ Electric poles including excavation and dismantling of foundation concrete and lines under the supervisionof concerned department , disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately |
| 7 | Removal of Hand pumps all complete job as per specification and direction of E/I |
| 8 | Dismantalling of stone masonary in cement mortar-do-do-all complete job as per specification and direction of E/I Masonary Work |
| 9 | Dismantalling of stone masonary in cement mortar-do-do-all complete job as per specification and direction of E/I PCC M15 and above |
| 10 | Dismantalling of stone masonary in cement mortar-do-do-all complete job as per specification and direction of E/I RCC M20 and above |
| 11 | Removing all type of Hume pipes and stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works. |
| 12 | Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000 metres.(i) Bituminous Course by mechanical means |
| 13 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a alead of 1000 metres, stackiung serviceable and unserviceable materials separately |
| 14 | Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimmingbottom andside slopes, in accordance withrequirements of lines, grades and crosssections, and tranporting to the embankment location within all lifts and lead upto 1000 m (including royality @ Rs. 27.48 per including watering rolling & compaction) (i) Ordinary soil |
| 15 | Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300-2. |
| 16 | Construction of Embankment with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2. |
| 17 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401. (5th revision) and direction of E/I |
| 18 | Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.) |
| 19 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. As per MOSRT&H specificaiton 502 (5th revision) & as per direction of E/I. |
| 20 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.As per MOSRT&H specificaiton 502 (5th revision) & as per direction of E/I. |
| 21 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.As per MOSRT&H specificaiton 502 (5th revision) & as per direction of E/I. |
| 22 | Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @4.0 to 4.5 percent by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 505 complete in all respects. with VG 30 Grade Bulk Bitumen. |
| 23 | Bituminous Concrete (Providing and laying dense bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 percent by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 509 complete in all respects. with VG 30 Grade Bulk Bitumen.(i) for Grading-II |
| 24 | Dry Lean Cement Concrete Sub- base (Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.) |
| 25 | Cement Concrete Pavement (Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing.) |
| 26 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel iron angle post 75 mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grad cement concrete 45 cm x 45 cm x 60 cm below ground levelas per approved drawing.(i) 90 cm Equilateral triangle. |
| 27 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel iron angle post 75 mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grad cement concrete 45 cm x 45 cm x 60 cm below ground levelas per approved drawing.(v) 60 cm Circular. |
| 28 | Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel iron angle post 75 mm x 75mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grad cement concrete 45 cm x 45 cm x 60 cm below ground levelas per approved drawing.(vi) 90 cm high Octagonal |
| 29 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. |
| 30 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.5th k.m. stone. |
| 31 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.Ordinary k.m. stone. |
| 32 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc.Boundary stone. |
| 33 | Supplying and installation of delineators (Road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 and the drawings. |
| 34 | Providing and erecting a \"W\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 |
| 35 | Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year. |
| 36 | Overhead Signs (Providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per IRC: 67)Truss and Vertical Support |
| 37 | Plain/ReinfocedCement concrete in open foundation complete as per drwaing and technical specifications.PCC Grade M20 |
| 38 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 39 | Fixing of reflective sheeeting including all cost of materials and fitting charges complete work as per specification and direction of E/I. |
| 40 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. |
| 41 | Plain/ReinfocedCement concrete in open foundation complete as per drwaing and technical specifications.PCC Grade M15 |
| 42 | Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications.Random Rubble masonry (coursed/uncoursed) |
| 43 | Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specificationsRandom Rubble Masonry (Coursed/uncoursed) |
| 44 | Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC Grade M25 Using Batching Plant, Transit Mixer and Concrete PumpHeight upto 5m |
| 45 | PCC Grade M20 using batching plant, transit mixer & concrete pump |
| 46 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 47 | RCC Grade M25 Using Batching Plant, Transit Mixer and Concrete Pump Height upto 5m |
| 48 | Plain/Reinforced cement concretein sub-strucutre complete as per drawing and Technical specifications RCC Grade M20 |
| 49 | Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications |
| 50 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification |
| 51 | RCC Grade M25 Using Batching Plant, Transit Mixer and Concrete Pump Height upto 5m |
| 52 | Providing and laying Flooring complete as per drawing and Technical specifications laid over cement concrete bedding. Rubble stone laid in cement mortar 1:3 |
| 53 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. |
| 54 | Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with Reinforced Cement Concrete with HYSD reinforcement conforming to MoRT&H specification and as per details given IRC-5 (Fig.-5, b) including dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board etc., as perapproved drawing and at locations directed by the Engineer, all as specified. (Area- 0.243 sqm./meter, single face)(ii)M 30 grade concrete |
| 55 | Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications. |
| 56 | Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) |
| 57 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full heightcompacted to a firm condition complete as per drwaing and technical specification. |
| 58 | Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. |
| 59 | Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per centbitumen by weight |
| 60 | Back filling behind abutment, wing wall, return wall complete as per drawing and technical specificationsGranular Material |
| 61 | Drainage Spouts complete as per drawing and Technical specification |
| 62 | Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. |
| 63 | Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.Stone/Boulder |
| 64 | Laying Reinforced cement concrete pipe NP4 / prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . 1200 mm dia |
| 65 | Pointing with cement mortar (1:3) on brick work in substrucutre as per technical specifications |
| 66 | Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications |
| 67 | Providing and laying of PCC M15 levelling course 100 mm thick below the pile cap. PCC Grade M15 using batching plant & manual placing |
| 68 | Pile Load Test on single Vertical Pile in accordance with IS:2911 (Part-IV) RCC M30 Pile Cap |
| 69 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. |
| 70 | Plain/Reinforced cement concretein sub-strucutre complete as per drawing and Technical specificationsRCC Grade M30Height upto 5m |
| 71 | Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification.RCC Grade M30 Using Batching Plant,Transite Mixer and Concrete Pump.Height 5m to 10m |
| 72 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications |
| 73 | Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. |
| 74 | Providing Steel Liner 10 mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing. |
| 75 | Driven Vertical Steel Piles complete as per Drawing and & Technical Specification.Section of the pile-H Section steel columm 450×250 mm (ISHB Series) |
| 76 | Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications |
| 77 | Drainage spouts complete as per Drawing and Technical Specifications. |
| 78 | Supplying , fitting and fixing in position true to line and level elastomeric bearing conforming to IRC:83 (Part-II) section IX and clause 2005 of Mort&H specification complete including all accessories as per drwaing and technical specifications |
| 79 | Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer\"s instructions for installation. |
| 80 | PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. PCC Grade M15 using batching plant & Concrete pump |
| 81 | Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification M30 |
| 82 | Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with Reinforced Cement Concrete with HYSD reinforcement conforming to MoRT&H specification and as per details given IRC-5 (Fig.-5, b) including dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board etc., as perapproved drawing and at locations directed by the Engineer, all as specified. (Area- 0.243 sqm./meter, single face)(ii)M 30 grade concrete |
| 83 | Providing and laying of filter media with granular materials/stones crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRT&H specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment , wing wall and return wall to the full heightcompacted to a firm condition complete as per drwaing and technical specification. |
| 84 | Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications.Stone/Boulder |
| 85 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concree, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with allk lifts and lead of 1000 metresLime concrete, cement concrete grade M-10 and below |
| 86 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory rollerin stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.WBM Grade II |
| 87 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory rollerin stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.WBM Grade III |
| 88 | Providing, laying and rolling of open-graded pemix surfacing of 20mm thickness composed of 13.2mm to 5.6mm aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capcity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller finished to required level and grades. |
| 89 | Add 18% GST : |
| 90 | Add 1% Labour Cess: |
AI Tender Summary
Tender Timeline
Jul 08, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 18, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender