Repairing, Maintenance Of Dvdf, Oven, Ht / Lt Binding Machine, Oil Filter / Centrifuging Machine Etc Installed At Repairing Workshop Gorakhpur, Maharajganj, Deoria, Kasia Kushinagar And Padrauna Under Ewd Gorakhpur
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jul 2023
0 days left
EMD
11330
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gorakhpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing, Maintenance Of Dvdf, Oven, Ht / Lt Binding Machine, Oil Filter / Centrifuging Machine Etc Installed At Repairing Workshop Gorakhpur, Maharajganj, Deoria, Kasia Kushinagar And Padrauna Under Ewd Gorakhpur
BOQ
| Sl. No. | Item Description |
| 1 | Heating Chamber (Oven) |
| 2 | Porviding & Installation of 2 KV Heating Element (Oven) [ISI mark] |
| 3 | Porviding & Installation of Contactor 40 Amp.[ SEIMENS/SCHNEIDER Make] |
| 4 | Porviding & Installation of Contactor 63 Amp.[ SEIMENS/SCHNEIDER Make] |
| 5 | Porviding & Installation of Contactor 18 Amp.[ SEIMENS/SCHNEIDER Make] |
| 6 | Porviding & Installation of Belt V-type |
| 7 | Porviding & Installation of Single Phasing Preventer (415V AC) |
| 8 | Porviding & Installation of Kit-Kat 200 Amp. |
| 9 | Porviding & Installation of Theromostat |
| 10 | Oven Contactor Coil |
| 11 | Porviding & Installation of 40 Amp [ SEIMENS/SCHNEIDER Make] |
| 12 | Porviding & Installation of 63 Amp [ SEIMENS/SCHNEIDER Make] |
| 13 | Porviding & Installation of 18 Amp [ SEIMENS/SCHNEIDER Make] |
| 14 | Motor Rewinding/Repairing |
| 15 | Porviding & Installation of MCB 63 Amp [ISI mark] |
| 16 | Porviding & Installation of Glass Wire 2.5 MM |
| 17 | Labour Charges for misllaneous works |
| 18 | DVDF-SET |
| 19 | Porviding & Installation of Meter Requlator [ISI mark] |
| 20 | Porviding & Installation of Timer |
| 21 | Porviding & Installation of Frequency Meter [ISI mark] |
| 22 | Porviding & Installation of Volt Meter [ISI mark] |
| 23 | Porviding & Installation of Amp. Meter [ISI mark] |
| 24 | MotorRewinding |
| 25 | Armeture Rewinding |
| 26 | High Voltage-SET |
| 27 | Porviding & Installation of Voltage Regulator [ISI mark] |
| 28 | Porviding & Installation of Amp. Meter [ISI mark] |
| 29 | Porviding & Installation of Volt Meter [ISI mark] |
| 30 | Porviding & Installation of Bell |
| 31 | Porviding & Installation of Transformer 12.012 |
| 32 | Power Analyser-SET |
| 33 | Repairing of Transformer |
| 34 | Repairingof Varriac |
| 35 | Porviding & Installation of Contactor Back ML-4 |
| 36 | Porviding & Installation of Volt Meter [ISI mark] |
| 37 | Porviding & Installation of Ammeter [ISI mark] |
| 38 | HT WINDING MACHINE |
| 39 | Porviding & Installation of Turn Counter Meter |
| 40 | Porviding & Installation of Reverse/Forward Switch |
| 41 | Porviding & Installation of Belt (A-57, A-5x, A-40) |
| 42 | Porviding & Installation of Ball Bearing |
| 43 | Porviding & Installation of Coupling Rubber |
| 44 | Porviding Mobil oil |
| 45 | Motor Rewinding |
| 46 | LT WINDING MACHINE |
| 47 | Porviding & Installation of Turn Counter Meter |
| 48 | Porviding & Installation of Reverse/Forward Switch |
| 49 | Porviding & Installation of Foot Switch |
| 50 | Porviding & Installation of Ball Bearing |
| 51 | Porviding & Installation of Belt (A-57, A-5x, A-40) |
| 52 | Porviding & Installation of Contractor 63 Amp. |
| 53 | Porviding & Installation of Gear oil |
| 54 | Motor Rewinding |
| 55 | Repairing of Gear Box |
| 56 | Hydraulic Trolley. |
| 57 | Porviding & Installation of Hydraulic kit back & front. |
| 58 | Porviding & Installation ofBearing. |
| 59 | Porviding & Installation ofBig shaft. |
| 60 | Porviding & Installation ofSmall shaft. |
| 61 | Porviding & Installation ofDall pin. |
| 62 | Porviding & Installation ofHydraulic oil. |
| 63 | Porviding & Installation ofBig wheel. |
| 64 | Porviding & Installation ofSmall wheel. |
| 65 | Porviding & Installation ofHouging wheel shaft. |
| 66 | Porviding & Installation ofRepit. |
| 67 | Porviding & Installation ofClutch chain. |
| 68 | Porviding & Installation ofBig lock. |
| 69 | Porviding & Installation ofHandle lock. |
| 70 | Porviding & Installation ofWheel lock. |
| 71 | Chain Tickle & Weighing Machine. |
| 72 | Repairing of Chain Tickle including labour charge. |
| 73 | Repairing of weighing Machine labour charge. |
| 74 | Oil Filter/Centrifuging Machine |
| 75 | Porviding & Installation of Filter cartridge |
| 76 | Porviding & Installation ofHeater Elements 2.0 Kw rated |
| 77 | Porviding & Installation ofHeater Packing |
| 78 | Porviding & Installation ofPacking of inlet & outlet and vacuum pump |
| 79 | Porviding & Installation ofTemperature meter |
| 80 | Porviding & Installation ofVacuum meter |
| 81 | Porviding & Installation ofHose pipe coupling |
| 82 | Porviding & Installation ofHose pipe |
| 83 | Porviding & Installation ofRoller chain 3/8\" |
| 84 | Porviding & Installation of Safety Valve |
| 85 | Porviding & Installation ofFilter Tank Packing |
| 86 | Porviding & Installation ofOver load relay |
| 87 | Porviding & Installation ofH.R.C. FuseKit-Kat32 amp.415 V. L & T Make or equivalent |
| 88 | Porviding & Installation ofContractor M N X-9L & T Make or equivalent |
| 89 | Porviding & Installation ofContractor M N X-A1 L & T Make or equivalent |
| 90 | Porviding & Installation ofContractor M N X-A2 L & T Make or equivalent |
| 91 | Porviding & Installation ofPorcelain connecting Rod |
| 92 | Porviding & Installation ofMCB 63 Amp.phase with neutralL & T Make or equivalent |
| 93 | Porviding & Installation ofPush button switch |
| 94 | Porviding & Installation ofHeater casing |
| 95 | The scope includes repairing of vacuum pump including replacement of damaged spares parts etc. Andfilling of mobile oil in vacuum |
| 96 | The scope includes change of spare parts i.e,Paking bush packing seat with machining and grinding etc.and Rebinding of inlet pump motor. |
| 97 | The scope includes change of spare parts i.e,Paking bush packing seat with machining bush with machining,surfacing and grinding etc.and Rebinding of outlet pump motor. |
| 98 | Complete replacement of wiring (damaged),rebinding in panel,heaters and change HR fuse. |
| 99 | Complete painting of Existing Machine after removing of old dust.surface & making proper surface in one coat red oxide & two coat of best quality of synthetic enamel paints. |
| 100 | Serviceof above spare parts |
AI Tender Summary
Tender Timeline
Jul 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender