Educational and Research Institute Boards / Undertakings / PSU Closing in 0 days TDR #38535871

Tender For Supply And Installation Of Equipment For B.Sc. (H) Physics Lab., School Of Voc. Studies And Applied Sciences

Issued by Boards / Undertakings / PSU · noida, Uttar Pradesh
Tender Value
7.95 Lakhs
Estimated cost
Bid Submission
03 Aug 2023
0 days left
EMD
8500
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
noida → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender For Supply And Installation Of Equipment For B.Sc. ( H ) Physics Lab., School Of Voc. Studies And Applied Sciences- 1 To Determine The Height Of A Building Using A Sextant. 2 To Determine The Coefficient Of Viscosity Of Water By Capillary Flow Method ( Poiseuille’S Method ) . 3 To Determine The YoungS Modulus Of A Wire By Optical Lever Method. 4 To Compare Capacitances Using De’Sauty’S Bridge. 5 To Verify The Thevenin And Norton Theorems. 6 To Verify The Superposition And Maximum Power Transfer Theorems. 7 To Determine Self-Inductance Of A Coil By Anderson’S Bridge. 8 To Study Response Curve Of A Series& Parallel Lcr Circuit And Determine Its ( I ) Resonant Frequency, ( Ii ) Impedance At Resonance, ( Iii ) Quality Factor Q And ( Iv ) Band Width. 9 To Determine The Mutual Inductance Of Two Coils By Absolute Method. 10 To Determine The Wavelength Of Sodium Source Using Michelson’S Interferometer. 11 To Determine Mechanical Equivalent Of Heat, J, By Callender And Barne’S Constant Flow Method. 12 To Determine The Coefficient Of Thermal Conductivity Of Cu By Searle’S Apparatus. 13 To Study The Variation Of Thermo-Emf Of A Thermocouple With Difference Of Temperature Of Its Two Junctions Using A Null Method And Also To Calibrate The Thermocouple In A Specified Temperature Range. 14 To Calibrate A Thermocouple To Measure Temperature In A Specified Range Using Op-Amp Difference Amplifier And To Determine Neutral Temperature. 15 Power Supply 16 To Determine The Absorption Lines In The Rotational Spectrum Of Iodine Vapour. 17 To Setup The Millikan Oil Drop Apparatus And Determine The Charge Of An Electron. 18 To Show The Tunneling Effect In Tunnel Diode Using I-V Characteristics. 19 To Determine The Planck’S Constant Using Leds Of At Least Four Different Colors. 20 To Study The Frequency Response Of Voltage Gain Of A Rc-Coupled Transistor Amplifier. 21 To Design A Wien Bridge Oscillator For Given Frequency Using An Op-Amp. 22 To Study The Colpitt’S Oscillator. 23 To Study The Pe Hysteresis Loop Of A Ferroelectric Crystal. 24 To Measure The Resistivity Of A Semiconductor ( Ge ) With Temperature ( Up To 150Oc ) By Four-Probe Method And To Determine Its Band Gap. 25 To Analyze Elliptically Polarized Light By Using A Babinet’S Compensator. 26 To Determine The Refractive Index Of ( I ) Glass And ( Ii ) A Liquid By Total Internal Reflection Using A Gaussian Eyepiece. 27 To Determine Boltzmann Constant Using V-I Characteristics Of Pn Junction Diode.

BOQ

Name of Work: SUPPLY AND INSTALLATION OF EQUIPMENT FOR B.SC. (H) PHYSICS LAB., SCHOOL OF VOC. STUDIES & APPLIED SCIENCES
Sl. No. Item Description
1To determine the height of a building using a Sextant.
2To determine the Coefficient of Viscosity of water by Capillary Flow Method (Poiseuille’s method).
3To determine the Young\"s Modulus of a Wire by Optical Lever Method.
4To compare capacitances using De’Sauty’s bridge.
5To verify the Thevenin and Norton theorems.
6To verify the Superposition and Maximum power transfer theorems.
7To determine self-inductance of a coil by Anderson’s bridge.
8To study response curve of a Series& Parallel LCR circuit and determine its (i) Resonant frequency, (ii) Impedance at resonance, (iii) Quality factor Q and (iv) Band width.
9To determine the mutual inductance of two coils by Absolute method.
10To determine the wavelength of sodium source using Michelson’s interferometer.
11To determine Mechanical Equivalent of Heat, J, by Callender and Barne’s constant flow method.
12To determine the Coefficient of Thermal Conductivity of Cu by Searle’s apparatus.
13To study the variation of Thermo-emf of a Thermocouple with difference of Temperature of its two Junctions using a null method and also to calibrate the Thermocouple in a specified temperature range.
14To calibrate a thermocouple to measure temperature in a specified range using Op-amp difference amplifier and to determine neutral temperature.
15Power Supply
16To determine the absorption lines in the rotational spectrum of Iodine vapour.
17To setup the Millikan oil drop apparatus and determine the charge of an electron.
18To show the tunneling effect in tunnel diode using I-V characteristics.
19To determine the Planck’s constant using LEDs of at least four different colors.
20To study the frequency response of voltage gain of a RC-coupled transistor amplifier.
21To design a Wien bridge oscillator for given frequency using an op-amp.
22To study the Colpitt’s Oscillator.
23To study the PE Hysteresis loop of a Ferroelectric Crystal.
24To measure the resistivity of a semiconductor (Ge) with temperature (up to 150oC) by four-probe method and to determine its band gap.
25To analyze elliptically polarized Light by using a Babinet’s compensator.
26To determine the refractive Index of (i) glass and (ii) a liquid by total internal reflection using a Gaussian eyepiece.
27To determine Boltzmann constant using V-I characteristics of PN junction diode.

AI Tender Summary

OUR REF NO 38535871
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 7.95 Lakhs
LAST DATE 03-08-2023
Authority
Authority Name Gautam Buddha University
Work Description Tender For Supply And Installation Of Equipment For B.Sc. ( H ) Physics Lab., School Of Voc. Studies And Applied Sciences- 1 To Determine The Height Of A Building Using A Sextant. 2 To Determine The Coefficient Of Viscosity Of Water By Capillary Flow Method ( Poiseuille’S Method ) . 3 To Determine The YoungS Modulus Of A Wire By Optical Lever Method. 4 To Compare Capacitances Using De’Sauty’S Bridge. 5 To Verify The Thevenin And Norton Theorems. 6 To Verify The Superposition And Maximum Power Transfer Theorems. 7 To Determine Self-Inductance Of A Coil By Anderson’S Bridge. 8 To Study Response Curve Of A Series& Parallel Lcr Circuit And Determine Its ( I ) Resonant Frequency, ( Ii ) Impedance At Resonance, ( Iii ) Quality Factor Q And ( Iv ) Band Width. 9 To Determine The Mutual Inductance Of Two Coils By Absolute Method. 10 To Determine The Wavelength Of Sodium Source Using Michelson’S Interferometer. 11 To Determine Mechanical Equivalent Of Heat, J, By Callender And Barne’S Constant Flow Method. 12 To Determine The Coefficient Of Thermal Conductivity Of Cu By Searle’S Apparatus. 13 To Study The Variation Of Thermo-Emf Of A Thermocouple With Difference Of Temperature Of Its Two Junctions Using A Null Method And Also To Calibrate The Thermocouple In A Specified Temperature Range. 14 To Calibrate A Thermocouple To Measure Temperature In A Specified Range Using Op-Amp Difference Amplifier And To Determine Neutral Temperature. 15 Power Supply 16 To Determine The Absorption Lines In The Rotational Spectrum Of Iodine Vapour. 17 To Setup The Millikan Oil Drop Apparatus And Determine The Charge Of An Electron. 18 To Show The Tunneling Effect In Tunnel Diode Using I-V Characteristics. 19 To Determine The Planck’S Constant Using Leds Of At Least Four Different Colors. 20 To Study The Frequency Response Of Voltage Gain Of A Rc-Coupled Transistor Amplifier. 21 To Design A Wien Bridge Oscillator For Given Frequency Using An Op-Amp. 22 To Study The Colpitt’S Oscillator. 23 To Study The Pe Hysteresis Loop Of A Ferroelectric Crystal. 24 To Measure The Resistivity Of A Semiconductor ( Ge ) With Temperature ( Up To 150Oc ) By Four-Probe Method And To Determine Its Band Gap. 25 To Analyze Elliptically Polarized Light By Using A Babinet’S Compensator. 26 To Determine The Refractive Index Of ( I ) Glass And ( Ii ) A Liquid By Total Internal Reflection Using A Gaussian Eyepiece. 27 To Determine Boltzmann Constant Using V-I Characteristics Of Pn Junction Diode.
Basic Detail
Tender No GBU/SP/06/2023 dt.06.07.2023
Bidding Type Tender
Location
City noida
State Uttar Pradesh
Key Dates
Publish Date 07 Jul 2023
Submission Date 03 Aug 2023
Open Date 04 Aug 2023
Finance
Tender Value 7.95 Lakhs
Tender Fee 1770
EMD 8500
Exemption Not Available
Document List
d7b1371c-9e11-457a-a494-53b34c275cd4.html
BOQ_1372059.xls
PHYSICS_LAB_SOVSAS.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 07, 2023
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 03, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 04, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

d7b1371c-9e11-457a-a494-53b34c275cd4.html

xls

BOQ_1372059.xls

pdf

PHYSICS_LAB_SOVSAS.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders